John Lewis 803/12315 User manual

Please ensure instructions are read in full before attempting to assemble this product.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
30 MINUTES 2 PEOPLE.
P
1/11
Stock code natural: 803/12315
Stock code white: 803/12210

2/11

3/11

B
pre-drilled
B
pre-drilled
5
5
4/11

5/11

Attach the Back Ply Support (6) to the Side Panel Left (4) by pushing the pre-attached Minifix (B) into the pre-drilled holes,
securing in place by using a screwdriver to tighten the Camfix (A) as shown in the diagram. Then place the Chrome Pipe (F)
into the Ring Holder (L) as shown in the diagram.
Attach the Back Ply Support (6) to the Side Panel Right (3) by pushing the pre-attached Minifix (B) into the pre-drilled holes,
securing in place by using a screwdriver to tighten the Camfix (A) as shown in the diagram. Then place the Chrome Pipe (F)
into the Ring Holder (L) as shown in the diagram.
6/11

7/11

8/11

Fix the Handle (J) to Door Panel Right and Left (5) using M4 x 25mm Handle Screw (K) and tighten using a screwdriver.
Insert the M3.5 x 16mm Pan Head Screw (D) into the pre-drilled holes at the back of the wardrobe and secure in place by
using a screwdriver to tighten as detailed in the diagram. Next attach Straps (M) at the top rear of the wardrobe using a
screwdriver to tighten the Flat Washer (H) and M3.5 x 16mm Pan Head Screw (D) as shown in the diagram.
PLEASE NOTE: Wall fixings are not supplied with this product as different
wall materials require different types of fixing devices. You must use
fixing devices suitable for the type of wall you intend to mount this product
to. The screws supplied are to fix the straps to the wardrobe.
WARNING: In order to prevent overturning, this product must be used
with the wall attachment device provided.
9/11

Wood furniture
•Wood displays different grain patterns depending on which way they are cut - for example, ‘the medullary ray’
which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural
beauty of the wood. Some furniture is also deliberately aged and rustic.
•Wood veneers also allow distinctive patterns to be created on flat surfaces, such as table tops and drawer fronts
by the way the slivers are arranged.
•All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.
How to care for your wood furniture
•Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
•Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre.
•Spray polishes are best avoided as they contain silicones which may spoil the furniture by building up over
time.
•Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central
heating can cause damage such as warping.
Care and Maintenance
10/11