John Lewis 877/12802 User manual

John Lewis
1.6M Glass Dining Table
Stock number: 877/12802
Thank you for purchasing this dining table. Please read the instructions carefully before
use to ensure safe and satisfactory operation of this product
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full
checklist of components is given in this leaflet. If any components are missing, please
contact the retailer from whom you bought this product.
This product takes approximately 15 MINUTES to assemble with 1 PERSON.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
1

Fittings and parts checklist
A Allen Key (4mm)
x 1
E Screws (M6X85)
x 2
B Allen Key (5mm)
x 1
F Glass with
aluminium disc x
1
C Screws (M6X15)
x 8
G Cross bar x 2
D Screws (M8X25)
x 8
H Legs x 2
Step by step assembly instructions
Note: Please do not fully tighten all screws until you finish assembling all
parts, then go back and fully tighten all screws, this will make it easier
during assembly of unit.
Step One
Put the cross bars (G) between two legs (H) and align the screw holes. Use Allen Key (A)
to tighten all the screws (C) first.
2

Step Two
Put the leg (H) and cross bar (G) on bottom of glass with aluminium disc (F) and align
the screw holes. Use Allen key (A) to tighten all the screws (E). Then, use Allen key (B) to
tighten all the screws (D).
Step Three
1. Finished the assembly
Care and Maintenance
Glass furniture
Use glass cleaner or soapy water for cleaning, do not use anything abrasive as this may
damage the surface of the product.
Protect surfaces from scratches and marks by using mats and coasters.
Metal
Protect metal from spillage, sunlight and heat. A slightly damp cloth is the best cleaning
agent for the material.
3

4
Do not use any abrasive cleaner or harsh detergent as this can damage the surface.
Avoid spilling or dropping crumbs of food with a high fat content on the surface as this
can permanently mark the metal
Safety Instructions
General warnings:
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where
necessary.
Please take care when handling or moving the furniture as careless handling may
cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for damage or injury caused by
incorrectly installed or assembled furniture.
Specific warnings for tables with glass:
If the glass is chipped or broken stop using the product and consult the manufacturer or
supplier.
WARNING:
a) Do not place very hot or very cold items on the glass surface(s) unless adequately
thick table mats are used to prevent such items from coming into contact with the
glass.
b) Do not sit or stand upon the glass surface(s)
c) Do not use the glass as a chopping surface. Do not strike the glass with hard or
pointed items.
d) When cleaning glass panels use a damp cloth or leather with washing up liquid or
soft soap if necessary; do not use washing powders or any other substances containing
abrasives since these substances scratch glass.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
John Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com