JOVENTA MM1.1 User manual

Application
The JOVENTA VALVE electric
mixing-actuator series is intended
for operating water valves such as
mixing valves, butterfly valves,
inter-flange dampers and ball
valves. The mixing-actuator is
designed so that it can be fitted,
using the relevant fitting kit, to many
different makes of valves.
The universal coupler between the
actuator and valve make an
uncomplicated application pos-
sible.
Key features
DC0...10V or 0...20 mA
control
Load-independent running time
Plug-in terminal block
connection
Selectable direction of rotation
Manual release button
2 adjustable auxiliary switches
See back page for settings
Automatic shut-off at end
position (overload switch)
Energy saving at end positions
Actuators available
with 1 m halogen-free cable
Customized versions available
Devices meet CE
requirements
Accessories
Mixer mounting kits
ZMA001 for Esbe mixers
ZMA002 for Centra-Duplex
mixers
ZMA003 for Holter mixers
ZMA004 for GF ball valves
VALVE
Nomenclature/Specification/Technical data
MM1.1 AC/DC24V
MM1.1S AC/DC24V with 2 auxiliary switches
. . . . . .K with 1 m halogen-free cable
Actuator MM1.1(S)
Torque 16 Nm
Running time 120 s
Supply voltage AC/DC24V
Frequency 50-60 Hz
Power consumption
- Running 3.0 W
- At end position 0.7 W
Dimensioning 6.0VA / 3.6A @ 2 ms
Weight 1.1 kg
Control signal Y1 DC0...10V
Control signal Y2 0...20 mA
Position signal U DC0...10V
Angle of rotation / working range 90° (93° mech.)
Angle of rotation / limitation None
Service lifetime 60,000 rotations
Auxiliary switches 3(1.5)A, AC24V
Setting range / adjustable 5°...85° < infinity
Noise level 45 d B (A)
Protection class II
Degree of protection IP 54 (cable downwards)
Cable aperture connection M16 x 1.5
Mode of action Type 1
Ambient conditions
- Operating temperature –20...+50°C / IEC 721-3-3
- Storage temperature –30...+60°C / IEC 721-3-2
- Humidity 5...95% r.F.
Service Maintenance free
Standards Mechanics EN 60 529 / EN 60 730-2-14
Electronics EN 60 730-2-14
EMC Emissions EN 50 081-1:92 / IEC 61 000-6-3:96
EMC Immunity EN 50 082-2:95 / IEC 61 000-6-2:99
MODULATING Mixing Actuators 4.15
Subject to design modifications without notice.

90342/E/12-04
Dimensions in mm
Setting the auxiliary switches
Factory setting
Switch aat 10°
Switch b at 80°
The switching position can
be manually changed
to any required position by
turning the ratchet.
For details of installation and commissioning see Manual 4.15
Auxiliary switches (S)
Wiring diagram
VALVE MODULATING Mixing Actuators 4.15
Setting the control signal
a b
21 22 23 24 25
ON
12
210
3
4
567
8
9
S
08
1
2
345
6
7
O
1 2 3 4 5 6
c
21 22 23 24 25
▼
▼▼▼▼
3(1.5)A, AC24V
Actuator at 0° position
ba
Changing the direction
of rotation
In order to reverse the direction
of rotation, move microswitch
d2 to the ON position. The
action of the output signal will
also be changed in the process.
Plug (c) must never be
reversed. The motor will
not function correctly if (c)
is reversed.
▼
▼
▼
▼
▼
▼
▼
▼
Microswitch d2
▼
▼
▼
▼
0
2
4
6
8
10
32.5
▼
▼
32.5
25
▼
▼
25
100
180
▼
▼
67.5
▼
▼
94.5
M6
123456
MM1.1(S)
AC24V ±20%
AC0…10V
DC0…10V
Y2 Y1 U
▼
~
▼
0…20 mA
▼▼▼
▼
▼
▼
ON
12
ON
12
Control signal Y1 DC0...10V
Input resistance Ri > 250 kΩ
Control signal Y2 0...20 mA
Input resistance Ri 388 Ω
Position signal U DC0...10V
Load resistance > 10 kΩ
Leave microswitch d1 in OFF position.
ON
12
ON
12
De-activated
activated
Microswitch d1
Self-adapting
Poti O
Poti S
Poti p
for Y signals
08
1
2
345
6
7
O
210
3
4
567
8
9
S
d..
P
DC24V ±10%