KAM KML412 User manual

LED Moonglow
KML412

1
1/ SAFETY INFORMATION
Read this instruction manual carefully before using the product. It contains
important information for your safety as well as operating and maintenance advice.
1. Observe all safety instructions to avoid damage through improper use! Follow
all warnings on the product.
2. Keep this instruction manual for future use. Should this product be passed on
to a third party, then this instruction manual must be included.
3. This product contains no user serviceable parts,non-user replaceable lighting
source and requires little maintenance. Leave any servicing or repairs to
qualied personnel only.
4. Before connecting the product to the power supply, check that the power
supply voltage and current rating corresponds with the power supply details
shown on the product rating label.
5. Danger of electric shock! Do not attempt to repair the product yourself. In
case of malfunction, repairs are to be conducted by qualified personnel only.
6. Warning! During cleaning or operation do not immerse the electrical parts of
the product in water or other liquids. Never hold the product under running
water.
7. Do not pull the power adaptor out of the electrical outlet by the connection
cord and do not wrap the connection cord around the product.
8. Connect the power adaptor to an easily reachable electrical outlet so that in
case of an emergency the product can be unplugged immediately. Pull the
power adaptor out of the electrical outlet to completely switch off the product.
9. Warning! Risk of fire! Do not expose the lens to a direct sunlight, even for a
short period.
10. Disconnect the power adaptor from the electrical outlet when not in use and
before cleaning.
11. Only use this product with the supplied power adaptor.
12. The product is not a toy. Keep it out of the reach of children.
13. Do not look straight into the light source during operation.
14. The light effects could cause visual problems. For epileptics particularly,
epileptic seizures could be triggered under certain circumstances.
15. This product is intended for indoor use only. Do not use it outdoors.

2
Output: 5 V/DC, 1A
16. Do not insert any foreign objects into the ventilation openings.
17. Do not cover the ventilation openings during use. Keep at least 50 cm of free
space around the product.
18. Do not install the product in locations where it can intentionally blind others.
19. Do not direct the light source to roads, pavements or any traffic zones (on land,
sea or air).
20. Discarded electric appliances are recyclable and should not be
discarded in the domestic waste!
Please actively support us in conserving resources and protecting the
environment by returning this appliance to the collection centres (if available).
2/ TECHNICAL DATA
Power adaptor Input: 100 - 240 V/AC, 50/60 Hz
Power consumption max. 5 W
Number of LEDs 6
Operating temperature max. 40 °C
Dimensions 180 x 180 x 150 mm
Weight approx. 0.3 kg
3/ DESCRIPTION
1. Power input
2. LED light
3. Power adaptor - UK plug supplied
1
2
3

3
6/ MAINTENANCE AND CLEANING
Warning! When not in use or before cleaning always disconnect the product
from the power source.
Warning! During cleaning or operation do not immerse the electrical parts of the
product in water or other liquids. Never hold the product under running water.
• Clean the product with a dry, fibre-free cloth.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the casing.
7/ WARRANTY
This product is guaranteed for a period of 12 months (defined by local law) from
the date of purchase against any failure resulting from manufacturing or material
defects.
This warranty does not cover damage caused by improper installation, improper
use, or normal wear and tear of the product.
More specically, the warranty does not cover:
• Damage or problems caused by improper use, accident, alteration or electrical
connection of improper intensity or voltage.
• Modified products, those whose warranty seal or serial number have been
damaged, altered, removed or oxidized.
• Cosmetic damage, including scratches, dents, or any other element.
• Damage caused by any intervention carried out by an unauthorised person. •
Defects caused by normal wear and tear or due to normal ageing of the
product.
• Product failures caused by use without accessories approved by the
manufacturer.
• Oxidised products.
4/ INSTALLATION
• Install the product at least 2 metres away from the intended projection surface.
5/ USE
• Connect the provided power adaptor (3) to a suitable power source.
Note: The product has no power switch and is always on as long as it is connected
to the power supply. Disconnect the power supply in order to switch the mini strobe
o.

4
UK DISTRIBUTOR
John Hornby Skewes & Co. Ltd.
Salem House, Parkinson Approach, Garforth,
Leeds LS25 2HR, United Kingdom.
www.jhs.co.uk
 
 
UK
CA c� ✓ � •  -•  � RoHS
©2022 JHS. Specifications are subject to change without prior notice. Made in China.