Kellfri 35-FMF275 User manual

Carefully read the operating instructions before
using the product!
Operating instructions translated from Swedish
35-FMF275
PASTURE TOPPER

TABLE OF CONTENTS
Introduction 3
Product information 3
Machine’s function 3
Technical data 3
General safety information 4
Product safety information 5
Work station 6
Instructions for emergency situations 6
Position of the warning labels 7
Symbol& Explanation 8
Personal protection 9
Surroundings 9
Environment 9
Before use 10
Filling and checking oil in the angle gear 10
Risks and hazards during use 11
Machines/Equipment connected to Hydraulics 12
Use/Operation 13
Cutting 13
Adjustment of cutting height 13
Connecting 14
Transportation and storage 14
Service intervals/maintenance 15
Hydraulics 15
Blades 16
Service 17
Recycling 17
Spare parts 35-FMF275 18
Spare parts 35-FMF275 19
Assembly 20
Illustrations 21 - 22
Deviation form 23
Warranty terms and conditions 24
Kellfri designs and supplies ecient, aordable machinery and components for forestry, ag-
riculture, construction and gardening in Sweden, the rest of the Nordic region and Europe.
We recommend that you always read and follow the safety instructions and the instructions in
the machine’s operating manual.
Kellfri is not liable for any errors in this document.


Table of Contents →
TECHNICAL DATA 35-FMF275
Working width 2750 mm
Weight 445 kg
Rotors 3 pcs
Blades 6
PTO shaft Standard
3-point linkage Cat 2
Power requirement 50-60 hp
Operating speed 6-12 km/h
Gearbox oil 80W-90 0.7 l
PTO speed 540 rpm
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions,
operating manual and sound common sense will guarantee many years of enjoyment using
the product. Kellfri’s equipment and products are aimed at self-employed farmers, horse en-
thusiasts and other country-dwellers who have stringent performance demands.
PRODUCT INFORMATION
• 2.75 m working width
• 3 rotors, 6 blades
• Best grassland cutting performance
• Robust design
• Height adjustable wear skids
Kellfri’s pasture topper is the specialist on large and small grasslands. The pasture topper is
designed for ecient cutting and topping of grass and elds in mixed terrain.
Its powerful square prole frame gives it good durability and strength. The pasture topper is a
versatile, robust and dependable grassland topper with 6 bolted, specially shaped blades that
fold out of the way in the event of collision with obstacles.
The pasture topper has a highly ecient gearbox with alloyed steel gears to ensure sustain-
able and safe power transmission. The machine is equipped with height adjustable wear skids
for customised cutting height and height adjustable metal guards to counteract stone chip-
ping.
The machine is supplied as standard with a PTO drive shaft and transmission oil.
MACHINE’S FUNCTION
The equipment is intended solely for cutting and topping grass and grasslands. It is prohibited
to use the machine for a purpose other than that described in this manual.

← Table of Contents
GENERAL SAFETY INFORMATION
Before using the equipment, and for the safety of yourself and others, you must read the in-
struction manual and understand its contents. Always keep the instruction manual easily ac-
cessible for the user of the equipment. It is a good idea to read the safety instructions from
time to time, both for your own safety and that of others. It is important that the user under-
stands that common sense and general caution are not built into the product, but must be
supplied by the user.
If the instruction manual gets damaged or in any other way cannot be used, new copies may
be ordered from:
Kellfri AB, Munkatorpsgatan 6, SE-532 37 SKARA, Sweden. Tel: [phone]
The general safety instructions can also be downloaded from Kellfri’s website:www.kellfri.se.
Do not use the equipment or product if you feel ill, tired or are under the inuence of alcohol.
Do not use the equipment or product if you are taking prescribed medication or drugs, suf-
fering from severe depression or mental illness. Always comply with general rules of the road
and applicable rules stipulated by the Animal Welfare Act. People under the age of 15 are not
allowed to use the equipment.
Warning!
The original design of the machine must not, under any circumstances, be modied with-
out the approval of the manufacturer. Unauthorised modications and/or accessories
may cause life-threatening injuries or death to users and others.
DANGER!
CAUTION!
NOTE!
Warning symbols identify important safety aspects in this manual in order to help you and others avoid dangers
and accidents. When using the machine: Be extremely careful!
Warning!
This symbol indicates that a serious accident will occur if the directions in the manual are not followed.
The accident will lead to serious injury, possibly death, or serious damage.
This symbol indicates that an accident will occur if the directions in the manual are not followed. The
accident will lead to serious injury or damage.
This symbol indicates that an accident may occur if the directions are not followed.The accident will lead
to injury or damage.
NOTE indicates the risk of a breakdown if the directions are not followed.
Where the machine is used professionally, employers are responsible for ensuring that users of the
machine have theoretical and practical knowledge of the machine and that work is performed in
a safe manner. Stay informed by complying with work environment legislation; contact your local
work environment authority.


Table of Contents →
PRODUCT SAFETY INFORMATION
Kellfri’s pasture topper is designed to work eciently at 540 rpm. Make sure that the tractor’s
power take o is set to 540 rpm. The machine may only be used for mowing grass. In addition,
the machine should only be used with a suitable tractor (see product specications) and pow-
ered by a suitable PTO shaft. Any other use is strictly prohibited.
The user of the machine should understand the contents of this manual before using, servic-
ing and assembling any tractor equipment and any other relevant actions. Never wear jewel-
lery, loose clothing such as neckties, scarves, belts, unbuttoned jackets that can get caught in
moving parts.
Always wear approved garments that comply with accident prevention regulations such as
anti-slip footwear, ear defenders, goggles and gloves. Wear a jacket with reective details if
used near public roads.
Contact your dealer, health protection authority or nearest equivalent authority for informa-
tion on the current safety regulations and special regulations to ensure personal safety
Warning!
ALWAYS DISENGAGE THE PTO SHAFT, STOP THE TRACTOR ENGINE AND APPLY
THE PARKING BRAKE BEFORE MAKING ANY ADJUSTMENTS TO THE MACHINE.
DANGER!
Never put your hands or feet under the machine without rst switching o the
equipment and the tractor’s engine. The rotors can continue to rotate for up to 1
minute after the PTO shaft is disconnected
• Never leave the equipment with the tractor engine running. Turn o the engine and ap-
ply the parking brake when you leave the equipment – even for a short period.
• Never leave the machine in a raised position. There can be a loss of pressure in the hy-
draulics and the machine can drop to the ground.
• Make sure that all guards are correctly installed and cannot come loose.
• The entire length of the PTO shaft must be guarded. Make sure safety chains are well
anchored.
• Only the driver of the tractor may be present in the vicinity of the machine while it’s op-
erational. Do not permit anyone to stand under suspended loads.
• Check before driving that there are no stones sticking up in the eld, or objects lying
around that could be thrown out while operating.

← Table of Contents
WORK STATION:
The driver must remain seated in the driver’s seat throughout the work. If the operator needs
to leave the tractor, the PTO must be disengaged, the tractor’s engine switched o and the
parking brake engaged.
Warning! NEVER OPERATE THE HYDRAULICS WHEN THE TRACTOR IS SWITCHED OFF
Things to remember when operating equipment with a PTO shaft
The transmission to the gearbox is protected both by the PTO drive shaft and by the shear bolt.
All protection should be kept eective and in good condition. If the guards are in poor condi-
tion or worn out, they should be replaced before the equipment is used.
DANGER!
If the PTO shaft is not correctly protected, it can result in death, as it can
trap parts of the body or clothing and cause life-threatening injury.
Ensure that the safety chain is correctly anchored to the PTO drive shaft and that the PTO shaft
is protected along its entire length. Ensure that the PTO shaft spins easily inside the protective
tubular pipe. Keep the spline grooves clean and well lubricated so that the PTO drive shaft can
be connected easily.
For adjustment and use of the PTO shaft, see the PTO shaft operating manual.
INSTRUCTIONS FOR EMERGENCY SITUATIONS
In case of emergency, call 112.
Always have a mobile phone or emergency phone available when working alone. A rst-aid
kit and re extinguisher must be kept in an easily accessible location when carrying out any
work, maintenance or service.
WARNING!
Never use equipment or products with defective safety components.


Table of Contents →


STOP
STOP manual.kellfri.se
25 m
WARNING DECALS
Make sure warning decals are always visible and clean them when necessary. Do not use a
high-pressure washer directly on the warning decal. If apart with a decal is replaced, or the
decal becomes worn or in any other way unusable, order a new set of decals. Explanation of
symbols on next page

← Table of Contents
SYMBOL EXPLANATION SYMBOL EXPLANATION SYMBOL EXPLANATION
Read the instruction
manual before start-
ing work!
STOP
WARNING! Risk of
crushing! Do not
open the guard
before all moving
parts have stopped.
Warning: rotating
PTO shaft - crushing
risk!
25 m
Ejection warning -
keep your distance!
Respect the equip-
ment’s risk zone
- 25 m
WARNING! Risk of
crushing!
There must be no one
standing behind the
tractor/towing vehicle
while the machine/
equipment is being
attached or detached.
WARNING! Be aware
that parts of the
machine may be hot
after use!
Risk of burns.
WARNING! Rotating
blades! Do not
put your hand or
any other part of
your body into the
machine while it is
running!
WARNING! No one is
allowed in the vicinity
of the machine during
operation! Do not climb
on the machine!
WARNING! Risk of
crushing! Do not per-
mit anyone to stand
under suspended
loads!
Risk zone! Keep your
distance!
WARNING! Crushing
risk!
Keep your dis-
tance!
WARNING! Danger-
ous oil pressure!
Oil under pressure
can penetrate the
skin. Seek medical
attention if this
occurs
DANGER! Do not
allow children in
the vicinity of the
machine during
operation! If there
are children in
the area, they
must be kept
under supervi-
sion!
IMPORTANT!
Always check
the belt tension.
Carry out checks
and maintenance
regularly!
IMPORTANT! Store
the machine or
equipment under a
roof, or cover it with
a tarpaulin when
not in use. Prolong
the service life of
your machine. Do
not expose it to
rain, sun or snow.
IMPORTANT!
Always check the
oil level in the
machine’s engine
and gearbox.
IMPORTANT!
Grease moving
parts regularly.
Recycling! The
product can be re-
cycled. It should be
taken to a recycling
station.
Product is
CE marked.


Table of Contents →
PERSONAL PROTECTION
Always wear suitable clothing and shoes. Do not wear loose clothing or jewellery while work-
ing with the machine or the product. Long hair should be tied up when working with equip-
ment that has moving parts. Use protective gloves to avoid the risk of burns if hot surfaces
such as exhaust pipes are touched, and to avoid oil and petrol getting in contact with the skin.
Ear defenders must be worn whilst the engine is running.
SURROUNDINGS
Check that the work area is free from bystanders, children and objects before hitching or using
the equipment. There is a risk of serious injury.
Be extra careful if there are children in the vicinity of the area where the equipment or product
is used or stored. Check that there are no low-hanging electrical cables within the work area.
Exercise caution when working on slopes and close to ditches.
Always work alone with equipment or products that are made for working alone. Remove all
rubbish from your work area. Keep work areas clean. Always respect the equipment’s risk zone.
Children must not be left unsupervised in the area!
Warning!
ENVIRONMENT
• Disposal of oil and other waste
• Improper disposal of oil or other waste may be hazardous to the
environment.
• When oil is emptied from the machine, it must be poured into a
leak-proof container suitable for oil. It is not permissible to store
oil in a container used for food or drink, in order to avoid the oil
being consumed by mistake and causing serious injury.
• It is prohibited to spill oil on the ground, or pour it into a drain or
anywhere leading to a water source.
• Discarded oil, fuel, coolant, brake uid, lters and batteries must
not be thrown away or emptied in just any manner. Contact your
local authority for further information.

 ← Table of Contents
BEFORE USE
Carefully read the safety instructions and the operating instructions. Make sure that you un-
derstand the safety instructions, operating instructions and warning decals. Use common
sense and suitable personal protective equipment when using the product.
Always check the performance of the machine combination to be used. It is important that
these are compatible and work satisfactorily together. This is to ensure that the equipment
or product works as expected, and to guarantee the safety of yourself and others. Carry out a
visual inspection of the equipment or product before use. Repair or replace damaged or worn
parts to reduce the risk of injury. Grease moving parts and check that all nuts and bolts are
tightened. Correct if necessary.
Learn and remember the correct working method. Beginners must work slowly until they have
learned how the machine or product works. Users/customers are responsible for ensuring us-
ers can handle the situation. If users feel that the machine is dangerous to use, it should not be
used. Read the tractor’s operating manual before connecting the equipment.
• Check and tighten all the bolts on the equipment!
• Check the oil level in the gearbox, top up if necessary.
• Check the cog belt’s tension, and adjust when necessary.
• Check that the ails are not defective, and replace if necessary.
FILLING AND CHECKING OIL IN THE ANGLE GEAR
The angle gear has a ller plug, level plug and drain plug.
• Checking: Loosen the level plug (Allen screw) and check the level, top up if necessary.
• Relling: Loosen the ller plug and level plug. Fill until the oil is level with the level plug
approx. .l
• Draining when changing the oil: Loosen the drain plug. Tip: Fit the hose in the hole and
allow the oil to run in a container.
BLEED PLUG/FILLER PLUG
DRAINAGE PLUG
LEVEL PLUG
In order to ensure safety, the product must only be used in the manner prescribed in these in-
structions. It is the user’s responsibility to read through the instructions and comply with them.
Warning!


Table of Contents →
RISKS AND HAZARDS ASSOCIATED WITH THE USE OF GROUNDCARE MACHINERY
Risk of crushing
Observers can be injured when the machine is lowered in the cutting position. Pasture toppers
have crushing points around the hinge areas and between the three-point linkage and the
main body.
Rotating blades
Any person can risk injury by putting their hands or feet under the machine when it is lifted
from the ground and the blades are still rotating.
Risk of crushing
This risk is common in mechanical transmission devices such as belt drives, bevel gears and
rollers. Ensure that all guards are correctly tted.
Risk when disengaging machine
The heavier a rotating part is, the longer it will continue to rotate after the wheel drive has
been disconnected. This property is called "Free-Wheeling". Rotating blades and other com-
ponents such as drive shafts, etc. will continue to rotate after the wheel drive has been disen-
gaged. Injuries occur:
• When the operator disengages the equipment and attempts to clean or adjust the ma-
chine before the components have stopped rotating.
• When the shear bolt in the PTO shaft protection breaks and the rotors continue to spin,
while the PTO has stopped. The operator’s awareness is of key importance for safety
around rotating parts. Never raise the machine while the blades are still rotating.
Risk of ejected objects
Machines that cut grass eject material during operation. Foreign objects such as stones, sticks
and other debris can nd their way under the machine and be ejected at great speed. Metal
guards at the sides and front prevent these objects being ejected, however, this is no guaran-
tee that they will always capture everything.
Bystanders or animals standing in the way of the discharged object may be seri-
ously injured. Never operate the machine when there are observers nearby. Respect
the equipment’s RISK ZONE m!
Noise
Note that the machine is intended for outdoor use and that the operator’s position is the driv-
er’s seat on the tractor. It is It is advisable to read the regulations set out in the tractor manual
and maintenance instructions
The sound pressure level during operation exceeds  dB. Hearing protection must therefore
be worn during operation.

 ← Table of Contents
Slipping and fall accidents
Accidents involving slipping and falling are often a result of:
• Slippery conditions
• Uneven steps and work platforms.
The risk of slipping and falling can be reduced considerably by exercising good judgement.
All unprotected rotating machine parts are a potential for accidents. Accidents usually occur
when loose-tting clothing or long hair is caught and wrapped around rotating parts, such as
PTO shafts or drive shafts on the machine. Ensure that all guards are tted correctly.
Drive safely on public roads
• Always follow trac safety rules on public roads, and following the regulations applying
to driving a tractor with towed equipment on a public road.
• Check that reectors, warning signals and/or warning ags indicating protruding equip-
ment are tted to the machine or tractor. These indicators must be correctly mounted,
and must be visible and easy for drivers of other vehicles to see.
• Bystanders must not lean against or climb onto the machine during transport or during
work. NEVER allow anyone to travel on the machine!
• The maximum transport speed must not exceed km/h
MACHINERY/EQUIPMENT CONNECTED TO HYDRAULICS
Be careful when you connect your machine or equipment to a hydraulic hose.
DANGER!
Pressurised oil and fuel leaks can penetrate skin and cause serious injuries. Do not use your
hands to locate leaks. Use a piece of paper or cardboard to search for leaks.
• Warning of high pressure, risk of penetration injury.
• Before repairs or maintenance are carried out, the system must be relieved of any remain-
ing pressure.
• Turn o the tractor and move the hydraulic levers back and forth to release any pressure
that may still be in the oil hoses and pipes before starting any work on them or the hy-
draulic cylinders.
• Clean the lter in the suction pipe after 10 hours’ work.
• Immediately replace hydraulic hoses if cracks or wear are detected.
• Do not adjust the valve settings. Incorrect adjustment can result in damage to the ma-
chine and/or injury.
• The hydraulic system must only be operated using hydraulic oil intended for the purpose.
Check the oil level before you start the machine!
• When commissioning a new machine, it is recommended that the hydraulic oil is changed
after the rst 10 hours of operation, in order to remove any dirt or metal chips which may
have got into the hydraulic system.


Table of Contents →
USE/OPERATION
Only those who understand the safety instructions and the operating instructions may use the
equipment or product. Exercise caution and care when working with the equipment or prod-
uct and only use it in the way described in the instruction manual. There is a risk of crushing
when working with equipment that has moving parts. Exercise caution when working with
equipment with hydraulic hoses as oil under pressure can penetrate the skin. Immediately
seek medical attention if this should occur. Always work alone with equipment that is made
for working alone. Respect the equipment’s risk zone.
CUTTING
• The rotating blades can throw stones etc. from the ground with great force. It is therefore
important for the operator of the machine to ensure that there is no one else in the vicin-
ity of the tractor during operation.
• Above the mower’s drive system are protective covers and protective plates that prevent
dirt and stones from being thrown around the machine and protect those of you who
work with the pasture topper from the rotating blades.
• When cutting tall grass, the grass sometimes winds itself around the rotor and blades.
For this reason, be attentive to abnormal noise from the machine or vibrations. Switch
o the tractor, disconnect the machine and check that the blades rotate freely. IMPOR-
TANT! Make sure the rotors have stopped rotating before lifting the machine to check the
blades. Wait a few minutes to ensure that the blades have stopped rotating.
ADJUSTMENT OF CUTTING HEIGHT
• The pasture topper rests on two adjustable skids, which can easily be adapted to the
desired cutting height, to ensure a smooth ride and allow for a high operating speed and
variable cutting height.
• The two skids have a number of holes in the fastening brackets. When you want to adjust
the cutting height, lift up the pasture topper and move the fastening screws in to the
hole you want.
• When mowing, the entire skid must rest on the ground to achieve the best and most even
mowing result.

 ← Table of Contents
CONNECTING
• Connect the machine to the tractor’s rear three-point linkage.
• Connect the PTO shaft. Secure the chain properly.
• Ready for use.
AFTER USE
• Parking is not allowed with the equipment above the ground, but with the equipment
resting on the ground.
• If necessary, rinse o the equipment.
TRANSPORTATION AND STORAGE
Check that the work area is free from bystanders, children and objects before driving o. Al-
ways observe additional caution during transport and moving. Ensure that the equipment or
product is well anchored and existing transport lashings are tted. Always position the load as
low as possible. Respect the risk zones even during transport and moving. When lifting, no one
must stand under suspended loads. Trailers used for transport should have brakes that work.
Always store the equipment or product on a dry surface, preferably under a roof, when not in
use. Ensure that the equipment or product is stable and cannot tip over. Never permit children
to play at the storage site. Be aware of the tipping risk!
MAINTENANCE AND SERVICE
Make sure that the equipment is stable and cannot tip over when carrying out maintenance
and service work. Replace damaged or worn parts to reduce the risk of injuries. Carry out
maintenance, service and checks in line with recommendations. Only use spare parts with
equal performance to reduce the risk of injuries and breakdowns. All electrical repairs and
electrical connections must be carried out by a qualied person.
Check that all nuts and bolts are tightened after maintenance and service work.
Always test the machine before starting work.
IMPORTANT! Check the oil level and lubricate grease points regularly!


Table of Contents →
SERVICE INTERVALS/MAINTENANCE
• Check the oil level before each use.
• Change the oil regularly, after each 100 hours of operation.
Position the machine as level as possible, check the oil level in the gearbox, top up if necessary
with 80W-90 gearbox oil through the oil ller plug as indicated. Check the correct level in the
oil level screw as shown in the illustration below.
FILLING AND CHECKING OIL IN THE ANGLE GEAR
The angle gear has a ller plug, level plug and drain plug.
• Checking: Loosen the level plug (Allen screw) and check the level, top up if necessary.
• Relling: Loosen the ller plug and level plug. Fill until the oil is level with the level plug
approx. .l
• Draining when changing the oil: Loosen the drain plug. Tip: t the hose in the hole and
let the oil run in a container.
BLEED PLUG/FILLER PLUG
DRAINAGE PLUG
LEVEL PLUG
HYDRAULICS
Hydraulic systems store a lot of energy. Careless service, adjustment or replacement of parts
can result in serious injury. Leaking hydraulic oil under pressure can damage the eyes or other
body parts. The following precautions are important:
• Make sure that the hydraulic pump is switched o.
• Lower equipment to the ground.
• Always check that there is no pressure remaining in the system.
A small leak in a hydraulic hose can be a serious hazard. A leak doesn’t always have to be vis-
ible, sometimes the only sign can be just a few drops. Never inspect hydraulic hoses with your
hands, as a ne jet of hydraulic uid can penetrate the skin. Use a piece of paper or cardboard
to search for leaks.

 ← Table of Contents
CHECK AND TIGHTEN THE BELTS AT REGULAR INTERVALS.
A NEW MACHINE SHOULD BE CHECKED AND THE BELTS TIGHTENED AFTER  HOURS
OF OPERATION.
FASTENING BOLTS
ADJUSTMENT BOLTS
BELT ADJUSTMENT
. Remove the protective covers.
. Undo the fastening bolts (see illustration), now adjust the adjustment bolt until the belts are
adequately tightened.
BLADES
The blades must be checked after every  hours of operation or every time the rotors are
removed from the machine. Check the blades carefully to ensure that they are in good condi-
tion, bent (A), worn (B) or (C) cracked blades must be replaced.
A B C


Table of Contents →
SERVICE INTERVAL MEASURE
Flails Before each use Replace all defective ails. Sharp blades give better results.
When replacing blades, tighten bolts fully.
While operating Listen out for noises
After each use Checking
Gearbox Before each use Check the level of the Oil type:
Gearbox oil 80W-90 Quantity: 0.7l
50 hours of operation First oil change
100 operating hours or a
minimum of once a year
Oil change
Rotor After 20 hours of operation Lubrication
Belts Before each use Belt tensioning.The belt should move 20 mm under pressure.
The equipment After each use Wash o earth and grass with water.
FAU LT MEASURE
The ail mower cuts unevenly
or badly
Check that all ails are intact and rmly in position.
Adjust the support roller and check that is in the correct
position.
Check the drive belts and tighten if necessary.
The cutting sound changes Check the roller.
Check the tension of the drive belts.
Check the ails.
Vibrations Check the ails.
RECYCLING
For scrapping, the equipment/product must be dismantled and transported
to a recycling station designated by your local authority. Any liquids should
be collected and transported to a recycling station designated by your local
authority. Contact your local authority for further information.

 ← Table of Contents







SPARE PARTS 35FMF275














* position  = Support shaft cat. * position  = Support shaft cat.
*,*









 MX


Table of Contents →
When ordering spare parts, contact Kellfri Service.
Item Spare part no. Designation
R35-275.002 Mounting kit 31-275 R35-275.003 Edge strip 31-185/275/365
1 R35-185.001 Knife
2 R35-185.002 Blade bolt M12x1.5
3 R35-185.003 Nut M12 x 1.5 for blade bolt
4 R35-185.004 Blade arm
5 R35-275.005 Cotter three-point linkage cat. 2 for pasture
topper
6 R35-275.006 Mudguard plate rear
7 R35-185.005 Reinforcement arm
R35-275.007 M14x70 with lock nut R35-275.008 M16x35 with lock nut
9 R35-185.009 Bevel gear
10 R35-185.010 Support shaft cat. 2 for pasture topper
11 R35-185.011 Rotor shaft
14 R35-185.014 Rubber strap
15 R35-185.015 Wire for pasture topper
23 R35-185.051 Bearing housing with bearing for blade shaft
27 R35-185.027 Belt pulley 1-groove ø210 mm
28 R35-185.028 Belt pulley 2-grooves, with circlip, ø210
29 R35-185.029 Belt pulley 2-grooves without circlip for
blade shaft
SPARE PARTS LIST 35FMF275
Item Spare part no. Designation
33 R35-185.033 Bleed nipple M16x1.5
37 R35-275.037 Skid shoe disc for 31-275
38 R35-275.038 V-belt C108 Li2743
39 R35-275.039 Belt pulley 3-grooves TR365
40 R35-275.040 Key A10x8x55
44 R35-185.044 Support shaft cat. 1 for pasture topper
45 R35-185.045 Vane right
46 R35-185.046 Vane left
47 R35-185.047 Spacer pulley 48 x 36 x 24 mm
48 R35-185.048 Spacer pulley 48 x 36 x 8 mm
49 R35-185.049 Washer pulley 45*10 mm
R35-275.041 Inner tube for wheel set R35-275HJ.001 Wheels R35-275HJ.002 Left wheel set R35-275HJ.003 Right wheel set R35-275HJ.004 Inner tube for wheel set
53 R35-185.053 Adjustment plate, gearbox
55 R10-6207-2Z-C3 Bearing 6207
56 R10-6308-2Z-C3 Bearing 6308
57 R35-185.037 R10-30209 Bearing conical
58 R35-185.017 Three-point linkage/stand, for pasture top-
per
59 R35-185.007 Skid left+ right

 ← Table of Contents
Side vane protection
Install skids on the right and
left sides of the machine
and all guards (1-3).


ASSEMBLY
1. Open the protective hood on the pasture topper and collect loose parts.
2. Mount the 3-point tower
3. Connect the pasture topper to the tractor’s 3-point linkage
4. Tension the stabilisation wires.
5. Connect the gear to the tractor’s power take-o.
6. Fit the ejection guard at the rear.
7. Fit the side vane protection on the side.
8. Install the front guard plate.
9. Check the belt tension.
10. Do not forget to install the breather plug and ll the gear with oil.

Guard plate – front
