Kensington SD4849Pv User manual

SD4849Pv USB-C 10Gbps Triple Video Driverless Docking Station - 100W PD - DP++/HDMI/VGA - Windows
Register your dock at kensington.com/register

2
1. Connect the power adapter.
1a. Connect the included AC adapter to the back of the dock.
1b. Connect the power cable to the adapter.
1c. Plug the power cable into a wall outlet.

3
2a. The front of the dock (vertical orientation from top to bottom).
2a1. Headphone jack.
2a2. SD and Micro SD UHS-I 3.0 card readers.
2a3. Two USB-A 3.2 Gen2 / 10 Gbps (5V/0.9A) ports for connecting accessories such as keyboards, mice, USB drives,
cameras, and printers.
2a4. One USB-C 3.2 Gen2 port (up to 5V/1.5A/10Gbps) for connecting devices such as external hard drives.
2a5. Power indicator light.

4
2b. The back of the dock (from top to bottom).
2b1. Two USB-A 2.0 ports for connecting accessories such as keyboards and mice.
2b2. Ethernet port (10/100/1000Mbps).
2b3. One VGA port to support legacy monitors.
2b4. One DP1.4++ port.
2b5. Two HDMI 2.0 ports.
2b6. USB-C PD 3.0 port (100W of laptop charging).
2b7. Power adapter jack.

5
3. Connect one end of the included USB-C cable to the USB-C PD 3.0 port on the back of the dock.
4. Connect the other end of the USB-C cable to a USB-C port on the laptop. This will provide 100W of laptop charging when the dock is plugged in.

6
5. Video specs.
5a. With one monitor.
DP1.2 HDMI/DP++: 3840 x 2160 @ 30Hz.
DP1.4 (DSC ON) HDMI/DP++: 3840 x 2160 @ 60Hz.
VGA: 1080p @ 60Hz.
5b. With two monitors.
DP1.2 HDMI (x2)/DP++ and HDMI/HDMI and VGA: 1080p @60Hz.
DP1.4 (DSC ON) HDMI (x2)/DP++ and HDMI: 3840 x 2160 @ 60Hz.
DP1.4 (DSC ON) HDMI and VGA: 3840 x 2160 @ 60Hz. (for HDMI), 1080p @60Hz. (for VGA).

7
5c. With three monitors.
DP 1.2 HDMI (x2) and DP++/HDMI (x2) and VGA: 1600 x 900 @ 60Hz.
DP1.4 (DSC ON) HDMI (x2) and DP++: 3840 x 2160 @ 30Hz.
DP1.4 (DSC ON) HDMI (x2) and VGA: 3840 x 2160 @ 30Hz. (for HDMI), 1080p @60Hz. (for VGA).

For support, visit kensington.com/support.