Keys Fitness Power System KPS-LEGM User manual

O
OWNER’S
WNER’S MANU
MANU
AL
AL
KPS-LEGM
LEG MACHINE
Questions?
Call our toll free Keys Fitness Helpline
1-800-683-1236

V
THANK YOU for making this Power System unit a part of
your exercise program. Keys Fitness and our Power System
Series assures the very best in value, appearance, durability
and biomechanics.
This manual will guide you through the assembly process. If at any time
you are having trouble with the assembly or use of this product, then
please contact us at our Keys Fitness Helpline. We have trained service
technicians on site to take care of you, our valued customer.
POWER SYSTEM SERIES
MODEL: KPS-LEGM
QUESTIONS?
CALL
1-800-683-1236
Monday-Friday
8:30-5:30 Central Time
When calling please have the following product information available:
• Product Series
• Model #
• Part Number
• Part Description
REGISTRATION CARD
To avoid unnecessary delays in warranty parts and to insure that a perma-
nent record of your purchase is on file with our company, be sure to send
in the warranty registration card or register on-line at www.keysfitness.com
within 10 days of purchase.

BEFORE YOU START
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician. This is
especially important for persons over the age of 35 and/or persons with pre-existing
health problems. Keys Fitness Products LP assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s
Manual and are familiar with safety information and precautions.
SAFETY INFORMATION WARNING!
X
SAFETY PRECATIONS
• This Power System unit should only be used on a level surface and is intended for
indoor use only. Keys Fitness recommends an equipment mat be placed under the
unit to protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate clothing.
Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your Power System unit should only be performed by an authorized serv-
ice representative, unless authorized and/or instructed by a Keys Fitness technician.
Failure to follow these instructions will void the warranty.

ASSEMBLY
STEP 1
Y
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Connect Front Frame (3) and Rear Base (2) to Main Frame (1)
using: 4 x (19) Bolt
8 x (18) Washer
4 x (20) Nylon Lock Nut

ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Z
STEP 2
Connect Swing Tube (8) to Swing Arm as shown using:
2 x (23) Bronze Bushing
1 x (26) Washer
1 x (27) Washer
1 x (28) Bolt
Slide Big Roller Pad (39) onto Swing Tube (8) and secure
using: 1 x (37) Collar
1 x (38) Plug
1 x (34) Allen bolt

[
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 3
Attach Right and Left Handles (11,12) using:
2 x (19) Bolt 4 x (18) Washer
2 x (20) Nylon Lock Nut
STEP 4
Attach Side Angle Frame (4) using:
4 x (19) Bolt 8 x (18) Washer
4 x (20) Nylon Lock Nut
STEP 5
Slide Stopper Prone (17) into Front Frame for range of motion
limiter.

\
STEP 6
Complete Adjustable Roller Pad Frame(10) as shown using:
2 x (43) Foam Pad
2 x (33) Big Plug
Slide into frame and secure with Pop Pin.
STEP 7
Slide Back Pad Adjustable Frame (9) into frame and secure
with Pop Pin.
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

]
STEP 8
Attach Back Pad (16) using:
2 x (28) Bolt 2 x (27) Washer
Connect Seat Pad (15) to Adjustable Seat Bracket (13) using:
4 x (28) Bolt 4 x (27) Washer
Connect Adjustable Seat Bracket (13) to frame as shown using:
1 x (14) Shaft with Screw End 2 x (18) Washer
2 x (20) Nylon Lock Nut
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

PARTS LIST
#DESCRIPTION QTY
1 main frame 1
2 rear base 1
3 front frame 1
4 side angle frame 1
5 leg frame 1
6 circular plate w/shaft 1
7 weight holder 1
8 swing tube 1
9 back pad adjustable frame 1
10 adjustable roller pad frame 1
11 left handle 1
12 right handle 1
13 adjustable seat bracket 1
14 shalft with screw end 1
15 seat pad 1
16 back pad 1
17 stopper prone 1
18 washer 12 22
19 bolt M12X80 10
20 nylon lock nut M12 12
21 plate 2
22 long pop pin 1
23 bronze bushing ID25.4 4
24 split tension pin 1
25 plastic washer 46*26*3 1
26 washer 32*10.5*4 1
27 washer 10 7
28 bolt M10X25 7
29 spring clip 1
30 grease fitting 1
31 pop pin 2
32 L pin 1
33 big plug 25 2
34 allen bolt M8X6 2
35 plastic sleeve 50.8*44.5 4
36 plug 44.5 6
37 collar 2
38 plug 50.8 1
39 big roller pad 1
40 end cap 50.8 4
41 plastic tube 1
42 grip 2
43 foam pad 22*110*180 2
44 rubber sleeve 1
45 spring clip sleeve 2
^

u
EXPLODED VIEW