kincrome Black Series User manual

1
Parts List
Assembly Instructions
40kg+
This productrequires a two person lift
- use properlifting techniques
Bunnings Weight Icons (2676) 30/3/04 10:11 AM Page 3
Operation Manual
K7536
60” Trolley K7862
TOOL TROLLEY
6 DRAWER
TOOLS & ASSISTANCE NEEDED
2 People Lift 5mm Hex Key13mm Spanner
Castor Handle
6 x EVA LinersNon-Locking
Swivel Castors (2)
Locking Swivel
Castors (2)
Trolley Handle x 1Keys x 2
13mm x 16 Bolts
(16) for Castors
8 x Hex Bolts for
Push Handle
Power Handle x 1 Washers x 16
Spring Washers x 16
745mm 475mm 950mm
745mm 475mm 825mm
545mm 397mm 50mm
545mm 397mm 92mm
175mm 300mm 12mm
125mm x 50mm (5” x 2”) x 2 Locking
60Kg
TOOL TROLLEY SPECIFICATIONS
Overall
Side Tray
Weight
Drawers
(Shallow)
Drawers
(Deep)
(with castors)
(without castors)
Castor Size:
THIS OPERATING MANUAL CONTAINS IMPORTANT
SAFETY INFORMATION. READ CAREFULLY AND
UNDERSTAND ALL INFORMATION BEFORE
OPERATING TOOL TROLLEY.
SAVE THIS MANUAL FOR FUTURE USE
K7536 Manual.indd 1 9/05/2018 12:51 PM

Assembly Instructions
2
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release lever while
pushing down the left grey release lever.
• Pull the drawer outward until it is
released from the drawer slide.
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the
drawer into the slots on the slides, being
careful that they are properly positioned.
• Once properly inserted, completely close
the drawer to set the slides in their
proper positions.
MAINTENANCE
• Periodically tighten all hardware
• Periodically lubricate castors
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean all surfaces
Push up the
right grey release lever
Pull down the
left grey release lever
Handle Installing
• Position the trolley side handle behind the
holes on the trolley.
• Attach with (4) bolts, and tighten with
a 5mm Hex Key.
Castor Installing (If applicable)
• Be sure the drawers are locked and lay
the trolley on its side.
• Secure castors to the unit using the
13mm bolts provided.
• Tighten with a 13mm Spanner.
• Repeat this process for the castors on
the opposite of the trolley.
• Return the trolley to its upright position.
Caution: Do not over tighten the bolts.
Caution: Both locking castors must be
fitted to front of trolley.
1
2
3
4
K7536
60” Trolley K7862
3
2
4
TOOL TROLLEY
6 DRAWER
1
K7536 Manual.indd 2 9/05/2018 12:51 PM

Replacement Parts
2
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T+61 3 9730 7100 F+ 61 3 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T+61 3 9730 7100 F+ 61 3 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
Australia & Global UK & EU
www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Kincrome UK Ltd PO Box 646 EASTLEIGH SO50 0NA
ITEM PART NO. DESCRIPTION QUANTITY
1 K7778 Lock & Key 1
2 K7779 Key Only (Specify Number) X 1 1
3 K7759-5 Trolley Handle 1
4 K7741 Power Handle 1
5 K7747-16 Ball Bearing Slide (Pair) 6
REPLACEMENT PARTS
ITEM PART NO. DESCRIPTION QUANTITY
6 K7536-6 Eva Mat Pack Piece (6) 6
7 K7542-1 Castor Swivel X 1 2
8 K7542-2 Castor Swivel X 1 (Brake) 2
9
K7759-17 Castor Bolt Pack
1
K7536
60” Trolley K7862
3
6
7
5
9
8
4
1 & 2
TOOL TROLLEY
6 DRAWER
K7536 Manual.indd 3 9/05/2018 12:51 PM