kincrome Black Series User manual

1
Parts List
Assembly Instructions
40kg+
This productrequires a two person lift
- use properlifting techniques
Bunnings Weight Icons (2676) 30/3/04 10:11 AM Page 3
Operation Manual
K7542
60” Trolley K7862
TOOL TROLLEY
12 DRAWER EXTRA WIDE
12 x EVA Liners
Non-Locking Swivel
Castors (2)
Locking Swivel
Castors (2)
Trolley Handle x 1Keys x 2
13mm x 16 Bolts
(16) for Castors
8 x Hex Bolts for
Push Handle
Power Handle x 1
TOOLS & ASSISTANCE NEEDED
2 People Lift 5mm Hex Key13mm Spanner
Castor Handle
1059mm 475mm 950mm
1059mm 475mm 825mm
867mm 397mm 65mm
545mm 397mm 52mm
545mm 397mm 85mm
257mm 397mm 52mm
257mm 397mm 160mm
175mm 300mm 12mm
125mm x 50mm (5” x 2”) x 2 Locking
85Kg
TOOL TROLLEY SPECIFICATIONS
Overall
Side Tray
Weight
Wide Drawers
(Shallow)
Medium Drawers
(Shallow)
(with castors)
(without castors)
Castor Size:
Medium Drawers
(Deep)
Small Drawers
(Shallow)
Small Drawers
(Deep)
THIS OPERATING MANUAL CONTAINS IMPORTANT
SAFETY INFORMATION. READ CAREFULLY AND
UNDERSTAND ALL INFORMATION BEFORE
OPERATING TOOL TROLLEY.
SAVE THIS MANUAL FOR FUTURE USE
Washers x 16 Spring Washers x 16
K7542 Manual.indd 1 9/05/2018 12:51 PM

Assembly Instructions
2
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release lever while
pushing down the left grey release lever.
• Pull the drawer outward until it is
released from the drawer slide.
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the
drawer into the slots on the slides, being
careful that they are properly positioned.
• Once properly inserted, completely close
the drawer to set the slides in their
proper positions.
MAINTENANCE
• Periodically tighten all hardware
• Periodically lubricate castors
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean all surfaces
Push up the
right grey release lever
Pull down the
left grey release lever
4
K7542
60” Trolley K7862
TOOL TROLLEY
12 DRAWER EXTRA WIDE
2
3
3
4
Handle Installing
• Position the trolley side handle behind the
holes on the trolley.
• Attach with (4) bolts, and tighten with
a 5mm Hex Key.
Castor Installing (If applicable)
• Be sure the drawers are locked and lay
the trolley on its side.
• Secure castors to the unit using the
13mm bolts provided.
• Tighten with a 13mm Spanner.
• Repeat this process for the castors on
the opposite of the trolley.
• Return the trolley to its upright position.
Caution: Do not over tighten the bolts.
Caution: Both locking castors must be
fitted to front of trolley.
1
2
1
K7542 Manual.indd 2 9/05/2018 12:51 PM

Replacement Parts
3
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T+61 3 9730 7100 F+ 61 3 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T+61 3 9730 7100 F+ 61 3 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
Australia & Global UK & EU
www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Kincrome UK Ltd PO Box 646 EASTLEIGH SO50 0NA
ITEM PART NO. DESCRIPTION QUANTITY
1 K7778 Lock & Key 1
2 K7779 Key Only (Specify Key Number) 1
3 K7542-4 Plastic Trolley Top 1
4 K7759-5 Trolley Handle (1) 1
5 K7741 Power Handle 1
REPLACEMENT PARTS
ITEM PART NO. DESCRIPTION QUANTITY
6 K7747-16 Ball Bearing Slide Set (2) 12
7 K7542-1 Swivel Castor (1) 2
8 K7542-2 Swivel Castor (Brake) (1) 2
9 K7759-17 Castor Nut & Bolt 1
10
K7542-12
Eva Mat Pack (12) 12
K7542
60” Trolley K7862
TOOL TROLLEY
12 DRAWER EXTRA WIDE
3
5
4
9
6
7
8
10
1 & 2
K7542 Manual.indd 3 9/05/2018 12:52 PM