kincrome EVOLUTION Side Locker User manual

Trolley Handle x 1
2 People 5mm Hex Key
For Handle:
Side Locker
3 x Liners
Keys x 2
K7952
2 Drawer
390mm (15”)
Operation Manual
Parts List
IMPORTANT: This operating manual contains important safety information,
read carefully & understand all information before operating
the side locker. Save this manual for future use.
Tools & Assistance
Required for Trolley:
1
Measurements: Weight: 26.3kg
WIDTH 390 mm DEPTH 465 mm HEIGHT 815 mm
Measurements - Top Section
WIDTH 380 mm DEPTH 460 mm HEIGHT 15 mm
Internal Locker
WIDTH 370 mm DEPTH 437 mm HEIGHT 570 mm
Small Drawers
WIDTH 266 mm DEPTH 405 mm HEIGHT 62 mm
16.1 to 40kg
This product requires a two person lift
- use proper lifting techniques
Bunnings Weight Icons (2676) 30/3/04 10:11 AM Page 2
• Periodically tighten all hardware
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean all surfaces
Maintenance Included

2
Assembly Instructions
Handle Installing
• Position the trolley side handle behind the
holes on the trolley.
• Attach with (4) bolts, and tighten with
a 5mm Hex Key.
11
2
3
4
Side Locker K7952
2 Drawer
390mm (15”)
Installing the Side Locker:
• Step 1: The Evolution Side locker can be
installed on either side of the Kincrome
Evolution Trolley. With assistance
carefully lift the side locker onto either
the left or right hand side of the Trolley by
interlocking the hanging edge of the side
locker to the edge of the trolley
• Step 2: If desired you can reverse the door
opening orientation (see instruction below)
• Step 3: You can fit the optional side handle
to the side locker if required to either the
left or right hand side depending on your
preference. Use the hex bolts provided.
• Step 4: Fit the Kincrome Badge
Reversing the Door:
• The Side locker door can open in either
direction depending on your preference.
It opens from the left from the factory
• Step 1: Unscrew the door retaining screws
while holding the door to keep it from
falling
• Step 2: Flip the door over to opposite side
of the locker
• Step 3: Reinstall the door screws ensuring
they are tight but do not over tighten.
Shelf Adjustment:
• Step 1: With an open hand, push up
against the bottom of the shelf to
disengage it from the locating tabs.
• Step 2: Move the shelf to the desired
position
• Step 3: Push down on the shelf to lock it
into the locating tabs
2
3
4

National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Australia & Global UK & EU
www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]
Kincrome UK Ltd PO Box 468 Southampton SO30 9EP
Spare Parts
3
5
3
7
8
4
6
1 & 2
ITEM PART NO. DESCRIPTION QUANTITY
1 K7999-16 Lock & Key 1
2 K7999-11 Key Only (Specify Number) 1
3 K7999-12 Trolley Handle 1
4 K7999-8 Ball Bearing Slide (Pair) 2
ITEM PART NO. DESCRIPTION QUANTITY
5 K7999-28 Eva Mat Pack 3 Pce 1
6 K7999-17 Locker Shelf 2
7 K7999-18 Door Magnet 2
8 K7999-19 Door Handle 1
Side Locker K7952
2 Drawer
390mm (15”)
Parts List
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release lever while pushing
down the left grey release lever.
• Pull the drawer outward until it is released from
the drawer slide.
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the drawer into
the slots on the slides, being careful that they are
properly positioned.
• Once properly inserted, completely close the
drawer to set the slides in their proper positions.
Push up the
right grey release lever
Pull down the
left grey release lever
1
2
1a 1b
Maintenance