kincrome K7710 User manual

TOOL CHEST 10 DRAWER
Part No. K7710
1
Castors (2)
Castors (2)
Castors
Ensure drawers are fully
closed prior to closing lid
and locking the chest
2 People Lift
11 x Liners
Automatic Drawer Retention
Keys x 2
TOOLS & ASSISTANCE NEEDED

2
ITEM PART NO. DESCRIPTION QUANTITY
1 K7777 Lock & Key 1
2 K7779 Key Only (Specify Key Number) 1
3 K7758-3 Gas Strut 2
4 K7758-4 Top Mould Edge (1) 1
5 K7758-5 Side Carry Handle (1) 2
6 K7748-15 Ball Bearing Slide Set (2) 2
7 K7758-7 Alum Drawer Grip (Small) (Black) 1
8 K7758-8 Alum Drawer Grip (Large) (Black) 1
87
REPLACEMENT PARTS
11
12
TOOL CHEST 10 DRAWER
Part No. K7710
9
14
1 & 2
3
4
5
15
13
6
10
ITEM PART NO. DESCRIPTION QUANTITY
9 K7758-9 Small Drawer 1
10 K7758-10 Large Drawer (Shallow) 1
11 K7758-11 Large Drawer (Deep) 1
12 K7758-12 Eva Mat Pack (8) 8
13 K7758-14 Handle Cover 1
14 K7758-15 Rubber Feet (4) 4
15 K7759-11 Small Drawer (Shallow) 1
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Australia & Global UK & EU
www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]
Warranty given by Kincrome Tools & Equipment Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria, Australia (Tel [phone]) If this product has materials or workmanship defects (other than defects caused by abnormal or
non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights
you have under the Australian, United Kingdom & Ireland Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian, United Kingdom & Ireland Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from the one shown on the packaging.

TOOL TROLLEY 12 DRAWER
Part No. K7712
1
Castors (2)
Castors (2)
Castors
Gas Struts (2)
17mm Spanner Hex Key
12 x Liners
Castors
8 x Hex Bolts for
Trolley Handle
16 x 17mm Bolts
for Castors
2 People
TOOLS & ASSISTANCE NEEDED
Trolley Handles x 1
Power Handles x 1 Keys x 2
TOOL TROLLEY 7 DRAWER
Part No. K7747GT
1
Castors (2)
Castors (2)
Castors
Gas Struts (2)
17mm Spanner 5mm Hex Key
7 x Liners
Non-Locking Castors (2)
Locking Castors (2)
Handle (1)Power Handle (1)
Castors
8 x Hex Bolts for
Push Handle
17mm Bolts
(16) for Castors
TOOLS/ASSISTANCE NEEDED
DRAFTING
STANDARD
AS100
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
TITLE:
DWG NAME:
A3
chris power 1
SHEET: 1 OF 1
DRWN BY: Dylan Luxa
1_HandleAssy_POWERBOARD
1:6 SCALE:
DO NOT SCALE DRAWING
DATE: 5/09/2014
COPYRIGHT © 2014. ALL WORK PROPERTY OF KINCROME.
DRAFTING
STANDARD
AS100
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
TITLE:
DWG NAME:
A3
chris power 1
SHEET: 1 OF 1
DRWN BY: Dylan Luxa
1_HandleAssy_POWERBOARD
1:6 SCALE:
DO NOT SCALE DRAWING
DATE: 5/09/2014
COPYRIGHT © 2014. ALL WORK PROPERTY OF KINCROME.
2 x Spring Loaded Castors (Locking)
2 x Spring Loaded Castors (Non Locking)

2
TOOL TROLLEY 12 DRAWER
Part No. K7712
Step 1: Assembly Preparation
Remove all contents from box. Reference the parts list to
make sure you have all the parts.
Place a cover on the floor to prevent any damage to surface of the Trolley.
Castors are prefitted on large trolleys.
Step 2: Attaching Castors
Using two people, tip the trolley so it is laying drawer side up.
Align holes in locking and non-locking Castors with matching
holes in the bottom tray as shown in figure 2. Attach using
16 x 17mm Hex bolts, lock washers and flat washers from
Castor bolt kit and tighten.
Ensure that both locking Castors are on same end of the Trolley.
We recommend mounting locking Castors at the front of the Trolley.
Step 3: Attaching the Side Handles
Align the mounting holes of the handle brackets with the holes
on the side of the Trolley. Attach using the Hex Bolts
Ensure drawers are fully
closed prior to closing lid
and locking the chest
Automatic Drawer Retention
TOOL TROLLEY 7 DRAWER
Part No. K7747GT
1
Castors (2)
Castors (2)
Castors
Gas Struts (2)
17mm Spanner 5mm Hex Key
7 x Liners
Non-Locking Castors (2)
Locking Castors (2)
Handle (1)Power Handle (1)
Castors
8 x Hex Bolts for
Push Handle
17mm Bolts
(16) for Castors
TOOLS/ASSISTANCE NEEDED
DRAFTING
STANDARD
AS100
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
TITLE:
DWG NAME:
A3
chris power 1
SHEET: 1 OF 1
DRWN BY: Dylan Luxa
1_HandleAssy_POWERBOARD
1:6 SCALE:
DO NOT SCALE DRAWING
DATE: 5/09/2014
COPYRIGHT © 2014. ALL WORK PROPERTY OF KINCROME.
DRAFTING
STANDARD
AS100
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN MILLIMETERS
TITLE:
DWG NAME:
A3
chris power 1
SHEET: 1 OF 1
DRWN BY: Dylan Luxa
1_HandleAssy_POWERBOARD
1:6 SCALE:
DO NOT SCALE DRAWING
DATE: 5/09/2014
COPYRIGHT © 2014. ALL WORK PROPERTY OF KINCROME.

3
ITEM PART NO. DESCRIPTION QUANTITY
1 K7759-1 MDF Wood Top 1
2 K7778 Lock & Key 1
3 K7779 Key Only (Specify Key Number) 1
4 K7759-4 Plastic Trolley Top 1
5 K7759-5 Trolley Handle (1) 1
6 K7758-7 Alum Drawer Grips (Pack x 3) (Black) 3
7 K7759-7 Drawer Extra Long 1
8 K7759-8 Drawer Large (Shallow) 1
9
K7759-10 Drawer Large (Deep)
1
7
20
REPLACEMENT PARTS
8
14
ITEM PART NO. DESCRIPTION QUANTITY
10 K7759-11 Drawer Small (Shallow) 1
11 K7759-13 Drawer Small (Deep) 1
12 K7747-16 Ball Bearing Slide Set (2) 2
13 K7860-18 Swivel Castor Pack (2) 2
14 K7860-19 Swivel Castor Pack (2) Brake 2
15 K7759-17 Castor Nut & Bolt 1
16 K7759-18 Folding Side Shelf 1
17 K7759-19 Eva Mat Pack (8) 8
18 K7741 Power Handle 1
4
1
5
2 & 3
TOOL TROLLEY 12 DRAWER
Part No. K7712
9
13
15
16
11
12
10
6
17
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Australia & Global UK & EU
www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]
Warranty given by Kincrome Tools & Equipment Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria, Australia (Tel [phone]) If this product has materials or workmanship defects (other than defects caused by abnormal or
non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights
you have under the Australian, United Kingdom & Ireland Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian, United Kingdom & Ireland Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from the one shown on the packaging.