Kogan KASSDCEACLA User manual

SUPER SLIM EVAPORATIVE
AIR COOLER
KASSDCEACLA

2
Safety & Warnings
3
Overview
5
Installation
8
Operation
10
Cleaning & Care
15
Specifications
16
Notes
17

3
Ensure to read all instructions in this user guide prior to first use. Retain this user guide for
• This product is intended for indoor use only.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Ensure that the power outlet used meets the required qualifications and has been
thoroughly inspected. When relocating the unit, verify the voltage requirements.
• If the power cord shows any sign of damage, cease immediately and contact
help.Kogan.com for support.
• Ensure the appliance is unplugged before/during filling and before cleaning.
• Avoid touching the power cord plug with wet hands, as it may cause electric shock.
• When removing the power cord, do not pull the cord, instead grasp the plug with your
hands.
• Do not fold or place heavy objects on the power cord.
• Inserting foreign objects, such as wooden or metal sticks, into the air inlet or outlet is
strictly prohibited as it may result in leakage, short circuits, or damage to the product.
• Do not spray pesticides or flammable substances near the unit, as this may cause
damage.
• Avoid directing the airflow directly at children for extended periods, as it may cause
illness or health issues.
• Prior to use, ensure the power cord plug is free from any foreign objects and securely
plugged in.
• In the event of unusual smells or abnormal sounds during usage, cease immediately
and contact help.Kogan.com for support.
• After adding water to the unit, avoid tilting or colliding it during placement or
movement to prevent splashing. If the product is accidentally tipped and contains
water, unplug it promptly and allow it to dry for 24 hours before turning it on again.
• Ensure that the water level in the tank does not exceed the maximum water level line.
During cooling and humidification, the water level should not drop below the minimum
water level line.
• When the water tank is full, do not lift the entire machine by its handle, as this may
cause water overflow. Only use the handle for pushing the unit. Lift the machine by the
handle only when you have confirmed that the water tank is empty or contains minimal
water.
SAFETY & WARNINGS

4
• While humidifying, it is strictly forbidden to disassemble or assemble the air filter net
and wet curtain bracket, as this may result in water droplets spraying from the air
outlet.
• When leaving or not using the machine for an extended period, be sure to turn it off and
unplug the power cord from the socket.
KEEP OUT OF REACH OF CHILDREN
• Swallowing can lead to chemical burns, perforation of soft tissue, and death.
• If you suspect your child has swallowed or inserted a button battery, immediately
call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764
766 (New Zealand) for fast, expert advice.
• Examine devices and make sure the battery compartment is correctly secured,
e.g. that the screw or other mechanical fastener is tightened. Do not use if
compartment is not secure.
• Dispose of used button batteries immediately and safely. Flat batteries can still
be dangerous.
• Tell others about the risk associated with button batteries and how to keep their
children safe.
• Severe burns can occur within 2 hours of ingestion. Seek medical attention
immediately.

5
1
Control panel
7
Remote control
2
Front cover
8
Rear filter
3
Front grille
9
Rear cover
4
Air duct
10
Power cord bracket
5
Side filter
11
Water tank
6
Power cord
OVERVIEW

6
1
Power
2
Mode
3
Decrease (fan speed/timer)
4
Fan speed
5
Timer
6
Increase (fan speed/timer)
7
Swing
8
Cooling/Humidifying
1
1
3
4
8
2
6
5
8
2
3
4
5
6
7
8
Remote Control
Control Panel

7
Display
Mode
Digital display
Fan indicator
Swing indicator
Cooling/Humidifying
Hour indicator

8
Installing/Replacing Remote Battery
This remote control is powered using x1 CR2032 3V battery. Replace the battery when
necessary.
• Place the remote control with the control buttons facing downward.
• Push the buckle on the battery cover inward and pull the battery slot out.
• Remove the old battery. Identify the battery polarity and insert a new battery onto the
slot.
• Place the battery slot back into the bottom of the remote control. Ensure the battery
slot is secure.
INSTALLATION
Buckle

9
Caster Installation
Ensure both casters are installed with the wheels facing outwards.
Front
Rear
Rear
Front
Note:
The casters have been designed to be a one-time installation. Once installed the
casters are not easily removed. Ensure they are installed in the correct orientation the
first time.

10
Connect the power cord to an electric outlet, the air cooler will ‘beep’ twice, the air cooler is
now in standby. In standby all indicators expect for power are off. Pressing any button other
than Power will be invalid.
Name
Icon
Description
Power
• When in standby, press the power button to turn the tower
fan on. The fan speed will be set to 8 by default and the fan
indicator on the display panel will illuminate.
• Press the power button again to turn the tower fan off and
return to standby.
Speed
This tower fan features 24 levels of speed.
• To adjust the speed, press fan speed button and then press
the ‘+’ and ‘–’ buttons to set the fan between 1-24. The fan
indicator on the display panel will illuminate. The level
selected will show on the digital display.
• Press the ‘+’ button to increase the fan speed.
• Press the ‘–’ button to decrease the fan speed.
• During first use, the tower fan will run at 8th speed.
Timer
• To turn the timer on, press the timer button and then press
the ‘+’ and ‘–’ buttons to set the timer to a time between 1-12
hours. The timer indicator on the display panel will illuminate.
• When the timer has been set, the display panel will alternate
showing the timer and the fan speed in 10 second intervals.
• To turn the timer off, press the timer button and then press
the ‘–’ button until the timer reaches 0 hours.
Swing
• Press the swing button to turn on the swing function. The
swing indicator on the display panel will illuminate.
• Press the swing button again to turn the swing function off.
The swing indicator on the display panel will disappear.
OPERATION
Note:
After 1 minute without user input the indicator brightness will decrease to 30%. This is
normal. Pressing the respective button will return the indicator to normal brightness.

11
Fan Modes
Modes
Press the mode button to change fan modes. The symbol for the
selected mode will show on the display panel. Pressing and
holding the mode button for 3 seconds will turn the display off.
Normal
Mode
The air cooler will run at a constant speed.
Natural
Mode
The air cooler
will run at
each speed
to create a
breeze effect.
Low
1st to 8th fan speeds.
Digital display will
read ‘8’
Medium
9th to 16th fan
speeds. Digital display
will read ‘16’
High
17th to 24th fan
speeds. Digital display
will read ‘24’
Sleep
Mode
The air cooler
will run with a
timed
downshift in
speed, ideal
for overnight
use.
Low
1st to 8th fan speeds.
Low speed, normal
fan runs.
Medium
9th to 16th fan
speeds. Fan will run at
medium speed for 30
minutes before
switching to low-
speed.
High
17th to 24th fan
speeds. Fan will run at
high speed for 30
minutes before
switching to medium.
After another 30
minutes the fan will
drop to low-speed.

12
Dry Air Mode
In this mode, the evaporative cooler primarily focuses on cooling the air by passing it
through the cooling pads while minimizing the amount of water vapor introduced into the
environment. It is useful in areas with already high humidity levels or when the user prefers a
cooling effect without increasing the moisture content in the air.
• With the air cool on, press and hold the fan speed “” button for 3 second to enable
the dry air mode. The fan indicator on the display panel will illuminate.
• Once enables, all buttons except the fan speed and power button will be invalid.
• To disable dry air mode, press and hold the fan speed button for 3 seconds.
• After running for 20 minutes, the air cooler will automatically shut down and enter
standby.
Cooling/Humidifying
The Cooling/Humidifying mode is particularly beneficial in hot and dry climates where the
air tends to be arid. By adding moisture to the air, the evaporative cooler can provide a more
comfortable and refreshing indoor environment. The cooling effect is achieved through the
evaporation process, which naturally reduces the air temperature, while the added humidity
helps to alleviate dryness and improve overall comfort.
• To enable this mode, with the air cool on, press the cooling/humidifying “” button.
The respective indicator on the display panel will illuminate.
• To disable, press the cooling/humidifying button again.
Low Water Alarm
When the water level becomes low, the water pump will stop working and the air cooler will
‘beep’ 10 times.
The water tank will need to be refilled.

13
Refilling Water
If you need to turn on the cooling and humidifying mode, ensure the water tank has been
filled with water. Note: When the air cooler is used for the first time, there may be a slight
odour and the water in the water tank will have a slight discoloration. This is a normal and
will not affect your health or the operation of the air cooler.
To add water to the water tank:
1. Rotate the two locking tabs on the rear of the air cool.
2. Remove the water tank.
3. Slowly refill the water tank with clean, cold water. Note: Do not exceed the
maximum water level mark.
Locked
Unlocked

14
Usage Ice Packs
An ice pack can be added to the water tank to
increase the cooling performance of the air
cooler.
• Place one of the provided ice packs into the
freezer until it is completely frozen.
• Open the water tank and add the frozen ice
pack to the water.
• Replace the water tank.
Note:
Do not open the ice packs.

15
• Turn off the air cooler and disconnect it from power before cleaning.
• Do not use any harsh chemicals to clean this product.
Water Tank cleaning
1. Unplug the power cord, unlock the release tab to the horizontal direction and pull
out the water tank.
2. Wipe off any scale from the water tank with a cloth dipped in a little detergent,
then rinse with thoroughly before.
Surface cleaning
1. To clean the surface of the air cooler, just wipe it with a damp cloth.
2. Do not use corrosive detergents or solvents for cleaning.
Maintenance
1. If the product is not to be used for an extended period, unplug the power plug, and
store the air cooler to prevent dust from entering the body.
2. Before storing, ensure that the ice pack, filters and all surfaces are dry and there is
no water in the water tank.
CLEANING & CARE

16
Rated voltage
220-240V~
Rated frequency
50Hz
Rated power
24W
Noise (High speed)
≤55dB
Rated output air volume
≥280m3/h
Rated evaporation
≥350mL/h
Energy efficiency ratio
10W/W
Dimensions
L263.9 x W210.6 x H644.4mm
Net weight
3.3±0.5Kg
Packing weight
4.6±0.5Kg (Included the weight of two standard
medium-sized ice pack)
Application environment
Relatively humidity less than 95% (25°C)
SPECIFICATIONS

17
NOTES

18

19

20
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com