Kohler C3-230 User manual

C³™-230
Elongated bidet toilet seat with remote control
K-4108
Features
•In-line heater provides continuously heated water for
consistent comfort
•Front and rear wash modes provide warm water for cleansing
•Adjustable water temperature and water pressure
•Choose oscillating or pulsating spray
•Touch-screen remote control with two programmable user
presets
•Self-cleaning function uses UV light to automatically clean the
wand surfaces
•Heated seat with adjustable temperature settings
•LED lighting illuminates the bowl to serve as a nightlight
•Warm-air drying system with adjustable temperature settings
•Carbon filter for odor control
•Quiet-Close™elongated lid and seat prevents slamming
•Grip-Tight bumpers hold seat firmly in place
•Quick-Release™functionality allows seat to be removed
easily from toilet for convenient cleaning
•Ergonomically designed for comfortable seating
•Fits most elongated toilets
•Continuously heated water for consistent comfort
•Automatic deodorization function for odor control
•Energy-save function
•Single stainless steel wand with adjustable water pressure,
temperature, and pulsate settings
Material
•Plastic construction
Installation
•Requires dedicated electrical GFCI circuit (120V, 15A, 60Hz)
Codes/Standards
ASME A112.4.2/CSA B45.16
UL 1431
CSA C22.2 No. 64
CSA C22.2 No. 68
KOHLER®Intelligent Toilet and C3™
Cleansing Seat Three-Year Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
96 Biscuit
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-29-2023 00:36 - US/CA

C³™-230
Elongated bidet toilet seat with remote control
K-4108
17-1/8" (435 mm)
13-1/4"
(337 mm)
Min
11-13/16"
(300 mm)
8-5/16"
(211 mm)
15-3/8" (391 mm)
20-7/16"
(519 mm)
1-1/2"
(38 mm)
Electrical Service Detail
32" (813 mm) R.
6" (152 mm) Min
2"
(51 mm)
1-3/8"
(35 mm)
Min
5-1/2"
(140 mm) 6-1/16"
(154 mm)
18-1/4"
(464 mm) -
1
19-1/4"
(489 mm)
Required Electrical Service
One dedicated circuit required, protected with Class A Ground-
Fault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Bidet toilet seat: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Seat shape type: Elongated
Seat front type: Closed-front
Seat-mounting
holes:
5-1/2" (139 mm)
Electrical component
rating:
Bidet toilet seat: 120 V, 15 A, 60 Hz
Power cord length: 46" (1168 mm)
Notes
Install this product according to the installation
guide.
Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi -
80 psi (139 kPa - 551 kPa).
Do not install this seat in a location where: (1)
water might be splashed on the product or
(2) excessive moisture, high humidity levels,
or condensation is present. This will avoid
damage to the electronic components.
CAUTION: Risk of property damage. A single
extension cord may be used provided the cord
“Type” begins with “SJ”, 12 gauge, grounded
(12/3), no longer than 25 feet, and plugged into
a GFCI outlet. Promptly replace any extension
cord that exhibits any sign of damage.
To avoid possible product malfunction, do not
plug in the seat until instructed to do so.
Locate the recepticle at least 6" (152 mm)
above the floor, and within a 32" (813 mm)
radius measured 2" (51 mm) from the bowl
ledge.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-29-2023 00:36 - US/CA