Kohler 12128W User manual

1
1084671-W2-A
IMPORTANT
INSTALLER: THIS MANUAL IS THE PROPERTY OF THE
CUSTOMER AND MUST BE RETAINED WITH THE PRODUCT
FOR MAINTENANCE AND OPERATIONAL PURPOSES.
Installation and User Guide
Stillness Fitted Bathroom
Furniture
MODEL NUMBERS
Important! Please quote the above model number(s) when ordering spares
12128W, 12131W, 12129W, 12125W, 12126W, 12127W, 12120W,
12121W

2
1084671-W2-A
CONTENTS
Description...............................................................................................2
Safety:Warnings ...................................................................................... 2
Installation ...............................................................................................3
General................................................................................................. 3
Install the Rectangular Mirror (800 mm)...............................................3
Install the Rectangular Mirror (1200 mm).............................................5
Install the 800 mm Base Unit ...............................................................8
Install the 400 mm, 600mm and 800 mm Side Units............................8
Continue with the Installation ...............................................................9
Install the Single Washbasin .............................................................. 11
Install the Base Unit for the Ceramic Vanity Top ................................ 11
Door Adjustment.................................................................................14
Fit the Door Handles ..........................................................................14
User Maintenance..................................................................................15
Cleaning ............................................................................................. 15
Customer Care.......................................................................................16
DESCRIPTION
This installation and user guide covers the installation of the Stillness range of tted
bathroom furniture.
There are two base units available for installing the washbasins. One is available for
a single washbasin and another is available for the ceramic vanity top.
The ceramic vanity top must be mounted on the wall before installing the base unit
(refer to the manufacturer’s instructions for the washbasin for xing dimensions).
SAFETY:WARNINGS
Kohler products are precision-engineered and should give continued superior and
safe performance, provided:
They are installed and maintained in accordance with the recommendations
given in this manual.
Carefully inspect the new furniture for any signs of damage.

3
1084671-W2-A
INSTALLATION
General
1. Make sure that the location of the mirrors are in the correct zone away from
the bathing area.
Install the Rectangular Mirror (800 mm)
1. Carefully remove the mirror from the housing.
2
400 mm
600 mm

4
1084671-W2-A
1. Decide on the location of the mirror.
2. Mark the positions of the xing holes for the wall hanging brackets and the
incoming electrical supply to the dimensions given.
3. Using a suitable drill, drill the hole for the xing screws. Fit suitable wall
plugs.
Note! There are no xing screws or wall plugs suppplied with this product.
Special consideration should be given to the xing arrangements when installing
on to a dry lined, stud partition or laminated panel wall structures. Installers
may wish to obtain alternative proprietary cavity xing, or choose other options,
however, these methods of xing are beyond the scope of this guide.
4. Position the mirror housing on the wall and secure in position with the xing
screws, making sure that it is level.
5. Connect the electrical supply to the electrical connectors.
2
120 mm
X mm
45 mm 45 mm
1450 mm 400 mm
220 - 240V

5
1084671-W2-A
6. Carefully lift the mirror back onto the housing making sure that it locates correctly
on the support screws.
Install the Rectangular Mirror (1200 mm)
1. Carefully remove the mirror from the housing.
2
2
400 mm
X mm

6
1084671-W2-A
2. Decide on the location of the mirror.
3. Mark the positions of the xing holes for the wall hanging brackets and the
incoming electrical supply to the dimensions given.
4. Using a suitable drill, drill the hole for the xing screws. Fit suitable wall
plugs.
Note! There are no xing screws or wall plugs suppplied with this product.
Special consideration should be given to the xing arrangements when installing
on to a dry lined, stud partition or laminated panel wall structures. Installers
may wish to obtain alternative proprietary cavity xing, or choose other options,
however, these methods of xing are beyond the scope of this guide.
5. Position the mirror housing on the wall and secure in position with the xing
screws, making sure that it is level.
6. Connect the electrical supply to the electrical connectors.
2
120 mm
X mm
45 mm 45 mm
1450 mm
400 mm
220 - 240V
3

7
1084671-W2-A
7. Carefully lift the mirror back onto the housing making sure that it locates correctly
on the support screws.
2

8
1084671-W2-A
Install the 800 mm Base Unit
1. Decide on the location of the base units.
2. Mark the positions of the xing holes for the wall hanging brackets to the
dimensions given.
3. Using a suitable drill, drill the hole for the xing screws. Fit suitable wall
plugs.
Install the 400 mm, 600mm and 800 mm Side Units
1. Decide on the location of the side units.
2. Mark the positions of the xing holes for the wall hanging brackets to the
dimensions given.
3. Using a suitable drill, drill the hole for the xing screws. Fit suitable wall
plugs.
120 mm
400 mm
X
20 mm
20 mm
720 mm
400 mm
320 mm
120 mm
400 mm
X
20 mm
20 mm
720 mm
400 mm
320 mm

9
1084671-W2-A
Continue with the Installation
Note! There are no xing screws or wall plugs supplied with this product. Special
consideration should be given to the xing arrangements when installing on to
a dry lined, stud partition or laminated panel wall structures. Installers may wish
to obtain alternative proprietary cavity xing, or choose other options, however,
these methods of xing are beyond the scope of this guide.
5. Fit the wall hanging brackets with the xing screws
6. Remove the drawers.
2
3
Base Unit Installation

10
1084671-W2-A
7. Fully unscrew the bottom adjusting screws. This will give you enough clearance
when hanging the base unit.
8. Fit the unit in position on the wall, lifting it over the wall hanging brackets.
9. Use a spirit level to make sure that the unit is level.
10. Level the base unit by adjusting the attachment screws. The top screw will
adjust the unit vertically, and the bottom screw will adjust it horizontally.
11. Ret the drawers.
2
3
Side Unit Installation