Kohler Englefield 1141301 User manual

GENERAL INFORMATION
• Please read these instructions carefully to familiarise
yourself with the required tools, materials, and
installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
• All information is based on the latest product
information available at the time of publication.
Kohler Co. reserves the right to make changes in
product characteristics, packaging, or availability at
any time without notice.
• These instructions contain important care, cleaning,
and warranty information - please leave these
instructions for the consumer.
KITSET FRAME ORDERING INFORMATION
Frame For Bath SKUs
1520x760x420
BEFORE YOU BEGIN
KITSET TIMBER FRAME
INSTALLATION INSTRUCTIONS
1670x760x420
1670x760x515
Frame Part Number
INSTALLATION
1141301
1141302
1141304
1300x1300x515
1500x1500x515
1141306
1141303
1141305
1) Unpack frame and check for any transit damage prior to assembly and installation.
2) Setup the frame on a flat level surface as shown overleaf.
3) Check that all pieces are oriented as shown overleaf for either a rectangular or corner bath frame.
4) Screw frame together using appropriate woods screws.The pilot holes will provide location.
Ensure that the edges of the frame are held flush and square when inserting screws.
For a better quality joint, it is recommended that an approriate adhesive is applied to
the frame edges prior to screwing together.
5) Check that the frame has been assembled square and straight.
6) Check that the frame fits the bath by turning the bath upside down and placing the frame on the bath.
1067A-0 Duo II, 1072A-0 Valencia, 1076A-0 Sorrento II
1064A-0 Duo II, 1071A-0 Valencia, 1073A-0 Sorrento II
1063A-0 Studio II (1 person)
1062A-0 Studio II (symmetrical), 99796A-0 Studio II (1 person)
1059A-0 Ario, 1996A-0 Sorrento II
1058A-0 Ario, 1075A-0 Sorrento II
1800x760x515
90°
90°
1850x950x520 11197A-0 Sierra (2 person) 1161731
PN: 1142407-A02-C Date: 14/09/15
1
!

CONTACT AND WARRANTY INFORMATION
For warranty information, please visit our website.
Australia
www.englefield.com
New Zealand
www.englefield.co.nz
CALL US FOR HELP
NEW ZEALAND
KOHLER NZ LTD
Free Ph: 0800 100 382
Free Fax: [phone]
www.englefield.co.nz
AUSTRALIA
KOHLER CO.
Free Ph: 1800 ENGLEFIELD
(1800 364 533)
www.englefield.com
2
Corner bath frame
Rectangular bath frame
FRAME ORIENTATIONS
7) An even gap should be set around the front edges of the bath. Alternatively, adjust the gap to suit
your particular installation requirements.
8) If the bath shell interferes with the frame, the frame can be notched out or sanded locally to achieve
a good fit to the bath shell.
9) The bath shell should next be bonded to the frame using an appropriate builder’s adhesive. It is the
builder’s responsibility to ensure the suitability of this joint. Be sure to keep the frame square to the
bath while the adhesive sets.
Apply adhesive between frame and bath
set even gap
set even gap
PN: 1142407-A02-C Date: 14/09/15