Kontron MUNGO560 User manual

MUNGO560MUNGO560
1
J4
J1
1
North Bridge
Jumpers
Introduction
JUMPER SETTINGS
(* = Default Setting)
JUMPER SETTINGS
(* = Default Setting)
LCD Power Selection (J1)
1,2 <+5V for LCD Power>
2,3 <+3V for LCD Power>
RTCCMOSClear(J4)
1-2 Normal Operation
2-3 Clear CMOS Contents
*
1
*
2. After installing the processor and memory, install the board into a chassis.
Connect the Power (J37) and HDD (J7) LEDs, the Power On (J14) and Reset (J13) switches,
and Speaker (J21) to the system interface connectors. (See the Connector Diagram on the next page.)
3.
4. Connect all other devices such as the IDE, USB and Ethernet. (See the Connector Diagram on the next page.)
5. Connect power from the power supply to the power input connector (J37).
NOTE: Standard power supply conversion cables are available. Please let us know your needs.
MUNGO560 Jumper Locations
1. Carefully remove your SBC from the packaging and set it on an ESD-protected work area.
This Quick Reference Card provides jumper and connector locations (next page)
to help you get your system running quickly. For complete connector
pinout information, please download the MUNGO560 manual from the Kontron Web site.
South Bridge
CPU
PN 932-0039-00-B

MUNGO560MUNGO560
Connectors
4
1
8
5
9
1
210
43
1
1
1
2
1
1291
92
183
184
93
94
25
26
50
1
1
2
J37
J34
J39
J36
J21
J3
J31
J16
J9
J38
J14
J29
J30
J13
J10 J15
J8
J25
J32 J33
J35
J7
1
J2
J20
8
8
1
1
10
9
2
J12
10/100 Ethernet GB Ethernet
CPU
North Bridge
South Bridge
10 9
1
SATA Activity Header
IDE + CF Activity Header
SATA Port 0
SATA Port 1
Chassis Intrusion
2 x LVDS Interface
Reset
Power Switch
Secondary IDE (Compact Flash)
Primary IDE
DDR Memory Socket
Chassis Speaker Header
COM Port 1
J2
J7
J8
J9
J10
J12
J13
J14
J15
J16
J20
J21
J25
J29
J30
J31
J32
J33
J34
J35
J36
J37
J38
J39
J40
J41
VGA
Chassis Fan I/F
COM Port 2
AC ‘97 Audio Signals Header
USB Port 3 & 4
CPU Fan I/F
USBPort1&2
Ethernet Ports 1 and 2
Power Input
10/100 ACT/LINK Header
10/100/1000 ACT/LINK Header
Mini-PCI (Back)
64-bit Mini-PCI Extension (Back)
MUNGO560 Frontside Connectors
J37 Power
1
2
3
4
5
6
+5V
+5V
+12V
+GND
+GND
+GND
Ethernet Port Notes:
Top Port: 10/100
Bottom Port: 10/100/1000
1
1
1
1
1
1
1
1
1
244
10
9
1
1
1
16
1
1
1
J41 12
60
65
1
3
2
4
Backside Connectors
J40
PN 932-0039-00-A
PN 932-0039-00-B