Kontron ADA-SDVO-PEG16 User manual

If it’s embedded, it’s Kontron.
ADA-SDVO-PEG16
Document Revision 110

www.kontron.com
» Table of Contents «
1User Information............................................................................ 1
1.1 About This Document ...............................................................................................................1
1.2 Copyright Notice .....................................................................................................................1
1.3 Trademarks ............................................................................................................................1
1.4 Standards..............................................................................................................................1
1.5 Warranty ...............................................................................................................................2
1.6 Technical Support ...................................................................................................................2
2Introduction ................................................................................. 3
2.1 ADA-SDVO-PEG16 ....................................................................................................................3
2.2 Naming clarification ................................................................................................................3
3Specification ................................................................................. 4
3.1 Functional Specification ...........................................................................................................4
3.2 Available variants....................................................................................................................4
3.3 Accessories............................................................................................................................5
3.4 Mechanical Specification ..........................................................................................................6
3.5 Electrical Specification .............................................................................................................6
3.5.1 Supply Voltage ......................................................................................................................6
3.6 Environmental Specification ......................................................................................................6
4Connector layout............................................................................ 7
4.1 Top layer ...............................................................................................................................7
4.2 Connector overview .................................................................................................................7
5Connector description and schematics ................................................ 8
5.1 FFC30 SDVO Input....................................................................................................................8
5.2 PEG16 slot .............................................................................................................................9
5.3 External power input.............................................................................................................. 10

www.kontron.com
6Revision History ............................................................................11

ADA-SDVO-PEG16 / User Information
1
1User Information
1.1 About This Document
This document provides information about products from Kontron Embedded Modules GmbH and/or its subsidiaries.
No warranty of suitability, purpose, or fitness is implied. While every attempt has been made to ensure that the
information in this document is accurate, the information contained within is supplied “as-is” and is subject to
change without notice.
For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or other rights
of third parties are concerned.
1.2 Copyright Notice
Copyright © 2003-2010 Kontron Embedded Modules GmbH
All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise), without the express written permission of Kontron Embedded Modules
GmbH.
DIMM-PC®, PISA®, ETX®, ETXexpress®, microETXexpress™, X-board®, DIMM-IO® and DIMM-BUS® are trademarks or
registered trademarks of Kontron Embedded Modules GmbH. Kontron is trademark or registered trademark of Kontron
AG.
1.3 Trademarks
The following lists the trademarks of components used in this board.
»IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corp.
»Microsoft is a registered trademark of Microsoft Corp.
»Intel is a registered trademark of Intel Corp.
»All other products and trademarks mentioned in this manual are trademarks of their respective owners.
1.4 Standards
Kontron Embedded Modules GmbH is certified to ISO 9000 standards.

ADA-SDVO-PEG16 / User Information
2
1.5 Warranty
This Kontron Embedded Modules GmbH product is warranted against defects in material and workmanship for the
warranty period from the date of shipment. During the warranty period, Kontron Embedded Modules GmbH will at its
discretion decide to repair or replace defective products.
Within the warranty period, the repair of products is free of charge as long as warranty conditions are observed.
The warranty does not apply to defects resulting from improper or inadequate maintenance or handling by the buyer,
unauthorized modification or misuse, operation outside of the product’s environmental specifications or improper
installation or maintenance.
Kontron Embedded Modules GmbH will not be responsible for any defects or damages to other products not supplied
by Kontron Embedded Modules GmbH that are caused by a faulty Kontron Embedded Modules GmbH product.
1.6 Technical Support
Technicians and engineers from Kontron Embedded Modules GmbH and/or its subsidiaries are available for technical
support. We are committed to making our product easy to use and will help you use our products in your systems.
Please consult our Web site at http://www.kontron.com/support for the latest product documentation, utilities,
drivers and support contacts. Consult our customer section http://emdcustomersection.kontron.com for the latest
BIOS downloads, Product Change Notifications and additional tools and software. In any case you can always contact
your board supplier for technical support.

ADA-SDVO-PEG16 / Introduction
3
2Introduction
2.1 ADA-SDVO-PEG16
The adapter card ADA-SDVO-PEG16 is an add-on card for modules with onboard 30pin FFC30 SDVO out. The adapter
provides Serial DVO on a PCI Express Graphics Port PEG16 to use with separate standard ADD2 cards. Currently the
adapter is supported by:
»nanoETXexpress-SP with onboard SDVO option (Part. No. 34001-xxxx-xx-x)
»ADA-COMeType1-FFC30 (34120-0000-00-1)
2.2 Naming clarification
COMexpress™ defines a Computer-On-Module, or COM, with all components necessary for a bootable host computer,
packaged as a super component. Interfaces will provide a smooth transition path from legacy parallel interfaces to
LVDS (Low Voltage Differential Signaling) interfaces. These include the PCI bus and parallel ATA and PCI Express and
Serial ATA.
»ETXexpress® modules are Kontron's COMexpress™ modules in basic form factor (125mm x 95mm)
»microETXexpress® modules are Kontron's COMexpress™ modules in compact form factor (95mm x 95mm)
»nanoETXexpress® modules are Kontron's COMexpress™ modules in the future ultra form factor (55mm x
84mm)

ADA-SDVO-PEG16 / Specification
4
3Specification
3.1 Functional Specification
»FFC30 - 30pin flat foil input for SDVO
»PCI Express Graphics PEG16 slot with one channel SDVOB to use with ADD2 cards
»External 12V power input
»30pin A-B flat foil cable
3.2 Available variants
Part. No
Description
34120-0000-00-0
ADA-SDVO-PEG16

ADA-SDVO-PEG16 / Specification
5
3.3 Accessories
Following optional accessories are available and compatible to the SDVO-PEG16 adapter card:
Part. No
Product
Function
820954
ADD2-CRT-Internal
SDVO to CRT internal on PEG port
ADD2-CRT-Internal on kontron.com
820953
ADD2-LVDS-Internal
SDVO to LVDS internal on PEG port
ADD2-LVDS-Internal on kontron.com
820952
ADD2-DVI-Dual-Internal-External
SDVO to Dual DVI with DVI and internal connector for PEG
port
ADD2-DVI-Dual-Internal-External on kontron.com
Note: The internal DVI connector is not supported by ADA-
SDVO-PEG16
820958
ADD2-DVI-DUAL-Internal-150
SDVO to Dual DVI with two internal connector for PEG port
ADD2-DVI-Dual-Internal on kontron.com
Note: The second internal DVI connector is not supported
by ADA-SDVO-PEG16

ADA-SDVO-PEG16 / Specification
6
3.4 Mechanical Specification
The size of the SDVO-PEG16 card is 95mm x 38mm. The maximum height on top is 11.6mm and defined by the PEG16
slot
3.5 Electrical Specification
3.5.1 Supply Voltage
»12V Input: 12V ±5% DC
»3.3V Input: 3.3V ±5% DC (optional)
Power Supply Rise time
»The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.
»There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point
following the ATX specification
3.6 Environmental Specification
Temperature
»Ambient temperature: 0 to +60 °C
»Non-operating: -30 to +85 °C
Humidity
»Operating: 10% to 90% (non condensing)
»Non operating: 5% to 95% (non condensing)

ADA-SDVO-PEG16 / Connector layout
7
4Connector layout
4.1 Top layer
4.2 Connector overview
Connector/LED/Switch
Description
J1
FFC30 - 30pin SDVO input
J2
PCI Express Graphics port PEG16 with SDVOB pin-out
J3
12V Input
J4
Optional 3.3V Input

ADA-SDVO-PEG16 / Connector description and schematics
8
5Connector description and schematics
5.1 FFC30 SDVO Input

ADA-SDVO-PEG16 / Connector description and schematics
9
5.2 PEG16 slot

ADA-SDVO-PEG16 / Connector description and schematics
10
5.3 External power input
From SDVO only 3.3V is supplied to the PEG port. An external power input is available on standard connector J3 to
connect external power if 12V is required for the components on ADD2 cards.

ADA-SDVO-PEG16 / Revision History
11
6Revision History
Revision
Date
Edited by
Changes
110
14-Jul-10
PRO
Initial release
Corporate Offices
Europe, Middle East & Africa
Oskar-von-Miller-Str. 1
85386 Eching/Munich
Germany
Tel.: [phone]
Fax: [phone]
[email protected]
North America
14118 Stowe Drive
Poway, CA 92064-7147
USA
Tel.: [phone]
Fax: [phone]
[email protected]
Asia Pacific
17 Building,Block #1,ABP.
188 Southern West 4th Ring
Beijing 100070, P.R.China
Tel.: + 86 10 63751188
Fax: + 86 10 83682438
[email protected]