Koso Mini 3 User manual

INsTRUCTION
1
3
30 mm
11.5 mm
60 mm
2
432
wh003ba110-B
●Thanks for purchasing our Ambiant Temperature meter. Before operating this unit, please read the instruction carefully and retain them for
future reference.
1.This lcd meter is work on DC 12 volts applications only.
2.For proper installation, please follow the steps described in instruction. Any damage caused by wrong installation shall be imputed to the users.
4.Do not disassemble or change any parts.
5.Opening the instrument will void any warranty. Maintenance or repair should be excecuted by our professionals only.
3.Don't break or modify the wire terminals. To avoid short circuit, do not pull the wires out of the terminal when installing.
Notice
MARK MEANING:
PRESS THE
BUTTON ONCE PRESS THE BUTTON 3
SECONDS
CAUTION! Some procedures must be followed to avoid the damages to the vehicle.
WARNING!
Some procedures must be followed to avoid damages to the instrument.
Some procedures must be followed to avoid injuries to the user or others.
Meter X 1 Mid-way connector X 2 Velcro X 1 set
Temp sensor wire set X 1
Temp sensor wire set 2( )Accessory
Mid-way connector (Accessory 3)
Wiring installation instruction
Red / "+"Wire connect to the DC 12v igniton switch
Meter (Accessory 1)
Please contact your local distributor if the items received are not the same as the one listed above.
Function instruction
Display range -30~120 -22~248℃(℉)：●Thermometer
Display unit:0.1℃ (℉ )
Around 22 g
●Meter weight
-20~+60 C
o
●Eective voltage DC12V
●Effective temperature range
●Meter standard
●Meter size
JIS D 0203 S2
60 X 30 X 11.5 mm
Design and specifications are subject to change without notice.
Black / Ground wire connect to the vehicle body or
the engine (must be a good ground)
Temperature-Yellow/Green
1-1 Accessory
(-4 ~+140F)

4-2
●
●
MAX Temp. record display, press the button once to switch to MIN temp. Recorded.
Figure: Current MAX temp. recorded is 28.5℃
●
●
In temp screen, press the button once to switch from temp to temp MAX.
Figure: Current temp. display is 22.3℃
●
●
MIN Temp. record display, press the button once to switch back to current temp. display.
Figure: Current MIN temp. record is -30.0℃
●Back to main screen.
Display Switch Between MAX & MIN Temp
wh003ba110-B
5
Trouble shooting
●
→
The power is not supplied properly to the
meter.
Make sure the wires are connected
correctly. The wires and fuse might be
broken.
The meter doesn't work
when the power is on.
The following situation do not necessarily indicate a malfunction of the meter. Please check the following points before taking it for repair.
TroubleTrouble Check itemCheck item
If the problem still can be solve according to the steps above, please contact your local distributor to get assistance.※
Temp does not appear ●
Check the sensor.
Is the wire or temperature sensor broken?→
4-1
Centigrade / Fahrenheit adjustment
Temperature display unit can be set on or℃ ℉
WARNING! To avoid accident, do not check the instument reading while riding.
●The default temperature unit setting is in Centigrade. Hold the button for 3 seconds to switch the temperature
to Fahrenheit.
●Now the temperature unit is changed to Fahrenheit. To switch back the temperature unit back to the Centigrade, hold
again the button for 3 seconds.
●Now the temperature is retuned to the Centigrade!
Press the button for 3secondss to erase the MAX temp. Recorded.
Hold the button for 3seconds to erase the MIN temp. Recorded.
or appear incorrectly.