Koso MINI 3 User manual

3
30 mm
11.5 mm
60 mm
Display range DC 6.0~19.9 V
Display range 0~ 30.0A
Volt meter
Display unit 0.1 V
Display unit 0.1A
AMP meter
When the voltage is below DC 11.5V or over 15.5V, the LCD display will flash to warn.Voltage warning
Setting range DC 8.0~13.0 V
Setting unit 0.1 V
Low Voltage warning
Functions
+ - 22g
Meter weight
-10~+60oC
Effective voltage DC12V
Effective temperature range
Meter standard
Meter size
JIS D 0203 S2
60 X 30 X 11.5 mm
Design and specifications are subject to change without notice!
installation instruction
Red positive wire should be
connected to the main power
switch (12v DC)

wh003ba123-A
Figure: AMP was set from -05.0A to -25.0A
Press and hold the button for 3 second to enter the AMP setting display
Ex:To set AMP at -25.0A in display.
Press the button one time to choose the setting number.
4-1
In the AMP display, press the button once to go back to the voltage display.
In the AMP display, press and hold the button for 3 second to enter the AMP setting display.
(please refer to 4-3 to set)
Voltage screen.
4-2
setting
4-3
WARNING! While riding the vehicle,do not attend to read or change the settings of
the instrument to avoid injuries to yourself or others.
EX: Low voltage warning set to 12v DC.
Press the button one time to choose the number to set.
Low voltage warning setting range : 8.0~13.0 V
EX: Low Voltage warning setting change from 12.5v DC to 12v DC.
Press down the button for 3 seconds to go back to the voltage screen.
Voltage screen.
Setting screen
Press down the button for 3 seconds to move to the digit you want to set.
In the voltage display, press the button once to go in the AMP display.
In the voltage display, press and hold the button for 3 seconds to enter the low voltage warning setting display.
(please refer to 4-2 to set)
AMP Setting
AMP Setting Range: -30.0 ~ 0
Figure:AMP was set from 15.0A to 25.0A
Press and hold the button for 3 second to go back to the AMP Display.
Ex:To set AMP at 25.0A.
Press the button one time to choose the setting number.
5
Trouble shooting
If you encounter operational failure,please check the following steps.If the problem still occur,please contact your local Koso dealer.
Trouble Check item
The meter doesn't work
when the power is ON. Make sure the wiring is connected correctly, make sure the wires and and fuse are not broken.
Press down the button for 3 seconds to move to the digit you want to set.
AMPt setting range: 0 -99.9
Low voltage warning setting