Koso RX2N GP User manual




InstructionDisclaimer

Dennis Kirk provides instructions to help our customers better understand how to install the
products we sell. The instructions are exact copies of what the manufacturer includes with the
product being sold.
That means the quality and accuracy of the instructions is solely dependent on what the
manufacturer produces. We do our best to make the text legible and the pictures viewable.
However, the end result depends largely on the quality of instructions the manufacturer
provides.
Therefore, you will find that some instructions are not of the highest quality. Sometimes text is
hard to read and pictures are not easy to see. At times you will find the overall look of the
instructions to be less than professional. However, we feel it is better to provide what we have
rather than provide nothing at all.
To the best of our knowledge the instructions and application information contained in the
instructions is accurate. However, Dennis Kirk assumes no liability related to any errors that
may be contained in the copy of the manufacturer’s instructions we provide. Buyers are solely
responsible to insure that product use is consistent with their application.
If you have any questions please contact us at [email protected] or
800-969-7501 so we can further assist you regarding additional product information or any other
business related questions.
Thank you for doing business with Dennis Kirk.

~~~ f7J ~ IJIIItITRODVCTIOJllltl
Thank you for purchasing KOSO RX2N GP style meter , before operating the
unit , please read the instruction thoroughly and reta in it for the future
reference.
~ Notice
1. The Icd meter is apply for DC 12V.
2.For installation, please follow the steps described in manual .Any
damage caused by wrong installation shall be imputed to the users.
3. Don't break or modif y the wire terminal . To avo id the short circuit , please
don't pull the wire when installing.
4.00 not disassemble or change any parts exclud i ng the manual
description .
S. The interior examination or maintenance should be executed by our
professionals.
MARK MEANING:
~ You could ge t the installation details from the information behind the mark.
~ Some processes must be follow ed to avoid the affection caused by wrong installation.
1t.'~~:li'lh'Cffi Some processes must be followed to avoid damages to yoursell or the PUblici
KC7jUra:::INJ Some processes must be followed to avoid the damage to the vehicle.
~ Press the button
~ Press the button
~ onetfme ~ 3 seconds
Content
1-1 Accessory
1-2 Option accessory . '0'. )i~
2-1 Wiring installation instructions . ~_ '.,:- --
2-2 Installation instructions ~,~:, ~.
~1 ~lmmmmm~-mmm;~mmmmmm~mm ~ / ~t ~ ~as
gr;JI alU 7J!j la
gf,JI' rmu
~ 7l!J~
~ 7l!J3
mil ~ 15
~ 7l!J~
~ .~
~ • • Ii1fS
~
9f:JI .
9fjI
- -• • • .
fij2a
fij2 I
Tl!J23
~ ~2S
3-3 The button function instruction
3-4 The screen switch instruction
~ We recommend that you finish th e relative setti ng before operating to
assure the operation of meter.

3 -1 Auto-checking screen
Off
Check 1
;~- ........
Check 2
, /~ , "c I ~
I - ..... I
, I
• ...."~,,J •
Check 3
Check 4
CheckS
Check 6
Check 7
CheckB
On
3-2 Over view
~ If will enter the setti ng screen automatically when the first time you start it.
~~ ~ @D3

--
--
248 ° F~ 10 leyels.
Indicators lights
. Repeater light (Green) ¢¢
.H igh beam light (Blue) aD
.N eutrallight (Green) N
.E OBD light (Amber)
.En gine oil pressure light (Red) .."..
",." n~ I ~==============~ -n
r
Clock 24H
Tachometer (10,000 RPM)
.D isplay range: 0-10,000 RPM.
.D isplay unit: 250 RPM.
Tachometer (20,000 RPM)
. Display
rang e: 0- 20, 000 RPM.
.D isplay unit: 500 RPM.
The RPM shift light (10,000 RPM)
.Setting rang e: 5,000-10,000 RPM.
.Setting unit: 100 RPM.
The RPM shift light (20,000 RPM)
.Setting range: 5,000 -
.S etting unit: 100 RPM.
MAX record
.T he meter will record the top
RPM and temperature
automatically.
3-2 Over view
Fuel meter
. Display range : 10 levels.
. Setting
range: 100 D, 510 Q, no display
Fuel
warning
. Setting range: 10-50 %
.Se tting unit: 10 %
> Regarding the setting, please check 4-9 .
Level thermometer (Water temperature)
.D isplay range: 20-120
oC (68-
• Display unit: Each level represents 10 C (50 F)
Speeding warning light
.Setting range.' 30-180 km/h
(20-110 MPH).
• Setting unit. 5 km/h (MPH).
>
Regarding the setting,
please check 4-4 .
'j ~~
,-.:.::- \
~========~
The max RPM recall indicator light
.The indicator light will move
according to the current RPM.
.The max RPM indicator light will
show
you the max RPM you reach
and light on for 3 seconds.
Tachometer (10,000 RPM)
.D isplay unit: 250 RPM.
Tachometer (20,000 RPM)
. Display unit:
500 RPM.
;-... ......... ~ .
· ~ - C 1
. .
. _
Digital thermometer
(Water & oil temperatu~e)
. Displayrange: 0-250 C
(32-482°F)
.D isplay unit: O.1°C (F)
Trip meter A.B
.Display range: 0-999.9 km
(mile), reset automaticall y after
999.9 km.
.Display unit: 0.1 km (mile).
20 , 000 RPM.
> Regarding the setting,
please check 4-5 .
~ -
Speedometer
.D isplay range: 0-360
km/h. 0- 223 MPH.
. Display unit: km/h &
MPH for alternative .
>
Regarding the setting,
please check 4-1.

3-3 The button function instruction
Select button
____ _ _ _ --:- __ ---::-_;:--:_--;--;-:--;-
1.ln main screen, press the Select but ton to choose the display of clock ,
water temperature or oil temperature .
2.ln
power test screen, press the Select button to choose the function you
want to use.
3.ln setting screen, press the Select to choose the fun ctio n you want to set.
Se l ect button X 3 seconds
1. /n main screen, ho ld down the Select button for
3 seconds to enter the
power test screen.
2.ln p
ow er test screen, hold down the Sel ect
button for 3 seconds to back to the main screen.
3.1n setting screen, hold down the Select button
for 3 seconds to back to the main screen.
Adjust button _ ___________ --:-_--:---:------:-
1. ln main screen, press the Adjust button to choose the display of odometer,
trip A trip B
or the MAX record.
2.ln
power test screen, press the Adjust button to reset the record , stop the
testing,
or restart the test. .
3.1n setting screen, press the Adjust button to make the number setting. If
you keep pressing down the Adjust button the setting
number will
increase
fast.
Adjust button X 3 seconds .
In main screen, hold down the Ad just button for 3 seconds to reset the tnp
A trip B, or the MAX record .
Hold down the adjust button _ _ _ ___ _ __ _ _
In setti ng screen, to add the setting value fast.
Select &adjust X 3 seconds
In main screen, ho le down the Select & Adjust
buttons
at the same time for 3 seconds to enter
the setting screen.
Fo r safety reason -you could adjustthe setting or operate
~ ""'ICJl .. -'-.uo<"-I '" the function onlywhen the bike is stop.
~~ ~ @n7
3 -4 The screen switch instruction
#",.............. r').~
:• ,--
I
I,
'. ,
' ...... I
Bs /e c t &
Ad Jue t
X3B
#................. I'i:
·• ,
·
, ,
,
,
·
".
~~-
In the setting screen, hold down the Select
button for 3 seconds to back to the main screel
In main screen, hold down the Select & Adjust
button
at the same time for 3 seconds to enter
the setting screen.
In main screen, hold down the Select buttons
for 3 seconds to enter the power test screen.
In power test screen, ho ld down the Select
buttons for 3 seconds to
back to the ma in scree
In anyscreen, you could hold down the Select
buttons for 3 seconds to
bac k to the main screen.

3 -5 The main screen function switch instruction Select
In main screen, press the Select button to choose
the function combination you want to display on
the screen.
The alternative combination is as the circle we list:
c/ock+fuel gauge > water temperature +fuel
gauge> oil temperature + water temperature
level gauge> c/ock+fuel gauge
~ Ifyou don't install the fuel wiring, the
fuel
gauge will not display
3 -6 The main screen function switch instruction Adjust
In main screen, press the Adjust button to choo:
the function
combination y ou want to display o~
the screen.
The alternative combination is as the circ le we Ii
odometer> trip A > trip 8 > MAX record.

3 -7 The setting screen instruction
In seffing screen pr ess the Select button to choose the luncllon
you want 10 sel. Th e lunc ti on in seNing screen IsIn orde r as speed
unit , cycle and piston, temperature unit, speeding warning light,
the
RPM shlflllght, over heat warning light, tire circumference
and sensor pOint, time, fuel gauge and Insufficient warning,
target speed timer test settfng . target distance timer settfng
and you could lin is h the s etting as the order. After finishing the
press down Ihe Select button to leave the setting screen.
+17
+16
+1
+2
+15
+3
+14
+4
+13
+12
+5
+11
+6
+10
+9
+8
+7
~ I you enter the setting screen for 0 seconds and don't press the
button , it will bock to the main screen automatically.
3-8 The power test screen instruction
In power test screen, press the Select button to
choose the test you want to do. The test function
is in order as target speed timer, target distance
timer, top speed timer.
In power test scr een , press the Select button to
switch from the target speed timer to target
distance timer.
EX. Now it is in the target speed timer screen,
and the setting Is 0-110 km/h.
In power test screen, press the Select button
to switch from the target distance timer to thE
top speed timer screen.
E X. Now the screen sw itch from the target
speed timer screen to the target distance
timer screen, and the setting is 0-100 M
(2 /32 mile).
In power test screen, press the Select button to
switch from the top speed timer to the target
speed timer.
EX. Now the screen switch from the target
distance timer screen to the top speed timer
screen, and the setting is 0-100 M (2/32 mile).

1
4 Function, setting instruction
eSpeedometer
Display
range: .0- 360 kmlh (0- 223 MPH)
Display unit: kmlh & MPH for alternative
O Display internal
<0.5 second
·O Odometer
.Display range: 0- 99999.(; km (mile),'
(eset automatically after 99999 :9 km (mile).
O Tr ip m eter AlB Displayrange.'
0- 999.9 km (mile),
reset
automat ically after 999.9 km (mile)
6
Speeding warning light Setting range :'30-180 kmlh (20-110 MPH)
Setting unit: S kmlh (MPH)
O Top speed r ecord Display range : 0-360 kmlh (0 -22 3 MPH)
O Tire circumference
Setting range: 300 -2,!?00 mm
Setting unit: 1 mm ', SensitivepOint: 1 -6 0
eTa ch ome ter Display range. 0-
10,000 I 20,000 RPM
Display unit. 250 I 500 RPM
O Display Internal <O.S
second
OS hift light
Setting range.' 5,000-10,000 I 20,000 RPM
Setting unit: 100 RPM
.OMAX RPM record
Display range :0- 10,000I 20,000 RPM
OStroke I piston se tt ing 2 Stroke: 1, 2, 3, 4 pistons
4 Stroke: 1, 2, 3, 4, 5, 6, 8, 10, 12 pistons
eThermometer Displayunit: °c & OF fo(alternative
eDigital thermometer Display range: 0-250°C (32- 482° F)
(Water & oil temperature) Display unit.' 0.1°C fF)
eLevel thermometer Display range : 20-120°C (68~248 ° F), 10 leVels
(Water temperature) . Display unit: Each level represents 10 °C (50° F)
O Display Internal <0 .5 second
.OOver heat warning light Setting range : 60 -250° C; (14'0- 482° F)
(Water & oil temperature) Setting unit: 1°C fF) .
O Top temperature record Display range : 0-2S0 °C (32-482 ° F)
eFuel meter Displayrange: 10 levels
Displayunit: Each level represents
10 %
Setting range: 100!2, 510!2, no display
Olnsufficient fuel warning Setting
range: 10-50 %
Setting
unit.· 10 %
eClock 24H
eTarget speed timer Setting range: 30-360 km lh (20 -22 0 MPH)
Setting unit: 5 km lh (MPH)
eTarget distance timer Setting range: SO-1 , 000 M (1132-20132 mile)
Setting unit: 50 M (1132 mile)
eTop speed timer The record includi ng ,
1.Spe
ed : 0-360 km lh (O -223 MPH)
2.oista nce : 0-999 M (0 - 3,280 feet)
3.RPM: 0- 10,000 I 20,000 RPM
4.Timer: 0- 9'59 "99 second.
eEffective voltage D C 1 .=: V ___ ___ _____ _ ~ ~ 2 .:. ~
eEffect ive temperature range -10- +60
0 C
eMeter standard JIS 0 0203 S2
eMeter size 135.7X
100.7 X 52 mm
Around 240 g
eMeter weight
----------.
elnd ic ator light color Neutral-green, Hi gh beam-blue ,
Repeater-green, EOBD-amber, Oil-red,
Speeding-red , RPM sh if t light y ellow I red .
~ Design and specdlcatton are Subject to change wdhout notice!
~if:gJ@

4 -1 Speed unit setting v:,l
In setting screen, press the Select button one
time to enter the speed unitsetting.
Press the Adjust button to choose the speed unit.
EX. Now the setting is km / h.
6. Now the speed unit IS flashing! I
~ You could choose km /h or MPH in the
speed unit setting screen.
6. The odometer & trip meter will change
together with the speed unit.
Press the Select button to continue the function
setting.
~ When you leave this screen, the setting
is finIshed.
If you jusl wont to make this function settino. you could
4(' hOld(jown the Select button for 3 secondS to bock to
the mOin screen.
fl)
4-2 Cycle / piston setting
In setting screen, press the Select button 2 timE
to enter the stroke/ piston setting screen.
~~ - ~ ~ ~ ~
eM
ake sure the correct strokes and pistons before setting.
eMake sure the Input IS correct, or the RPM output will be incorrect.
eWe define the engine with the ignition system ignites every 360 degree c
2-stroke and the engine with the ignition system ignites every 720 degreE
as 4-stroke.
eSome 4-stroke bikes with one single piston are igniting every 360 degree
once, so the settIng should be the same as the bike with 2-stroke and
one piston engine.
Press the Adjust button to select the stroke.
EX. Now the stroke number is flashing.
6. Now the stroke setting number is flashIng!
~ You could set the stroke as 2 Cycle or 4
Cycle.
(ji) Ifyoujust wont to chec k your setting. you could hOld down
~ t he Select button for 3 seconds to bock to the main screer
Press the Select button to enter the piston settir
screen.
EX. Now the setting is changed from 2 Cycle to
Cycle.
Press the Adjust button to select the piston
number.
6. Now the piston number is flashing.
~ 2 Cycle: 1,2,3A pistons
4 Cycle:
1,2,3-4,5,6,8,10,12 pistons

4-2 Cycle / piston setting ®,l
# ... -..... ~ •
Press the Select button to enter the signal input
setting.
EX. The piston setting is changed from 1 P
/'o "-
. '
'J
-[Piston) to 4 P(Pistons),
',. - I. " .....
'" ..... ' '
Press the Adjust button to choose the input
signal you want to set,
it. Now the input signal setting is flashing!
~ The input signal setting range is
between hight (The positive signal) &
low (The negative signal)
~ If the tachometer can't detect the
signal [No RPM
is displayed on the
screen), you
could choose another
setting, and check it again.
Press the Select button to enter other setting
screen.
EX. The input signal is changed from hight to low.
~ When you leave this screen; the setting
is finished.
If youjust want to make this function settinq, you could
<I[ , hold down the Select button for 3 secondS to back to
~
the main screen.
4-3 The temperature unit setting
In setting screen, press the Select button 5 tim
to enter the temperature unit setting screen.
Press the Adjust button to choose °c or OF
EX. Now the temperature unit is 0c.
it. Now the temperature unit is flashingI
Press the Select button to continue the functio
setting,
EX. Now the temperature unit is changed from
°c to OF
~ ;-;W-;;h:-:e:-:n:-y-o::-u--'-/e-a-v-e---'-;th--:is-s-c-r-e-e-n-, --:th:-e-s-eCCtt"-in-g
is finished,
Ifyoujusf want fa make fhis function settinq, you could
'I[ , hold down the Select button for 3 secondS to back to
~
the mom screen.

4 -4 Speeding warning light setting ;.:
In setting screen, press the Select button 6 times
to enter the speeding warning lightsetting screen,
,~~
The speeding light will
light
on when the speed reaches
your speeding warning setting,
Press the Adjust button to choose the setting
number,
EX Now the speeding warning light
setting
is 30 km/h,
4-5 The RPM shift light setting ~
In setting screen, press the Select button 7 times
to enter the RPM shift light setting screen,
..,\ 1 /,.,.
, ~~
"'~:'~ ' ~~'!!' ~ " ,
If you set the RPIv1 shift light ot
I ' ",
12,000 RPM, the yellow light
, "-
C'
I
will light on ot 11,500 RPIv1
ond the red light will light on
. " ': .
when it reoches 12,000 RPM
Press the Adjust button to choose the setting
number,
EX Now the RPM shift light setting is 9,000 RPM.
& Now the shift light and the setting number is
flashing!
~ The over RPM warning setting range:
3,000-15,000 RPM.
Setting unit,' 100 RPM.
Press the Select button to continue the function
setting,
E
X. Now the RPM shift light setting is changed
from 9,000 RPM to 12 , 000 RPM.
~ When you leave this screen, the setting
is finished,
Ifyou jusl wonllo moke Ihis lu nct ion s ett i ng , you cou ld
01[' hold down the Select button f or 3 seco n dS 10 bock 10
~
the main screen.
& Now the speeding warning light and the
setting
is flashing!
~ The speeding warning light setting
range,
30-180km/h (20-110 MPH).
Setting unit, 5 km/h (MPH)
& Th e settinQ unit will change together with the
speed untf setting(4-1), 1
Press the Select button to continue the function J
setting,
EX Now the setting is changed from 30 km/h to
60 km/h
~ C:W-::h-e-n-yo-u---'-/e-a-v-e-C;th-:is-sc-r-e-e-n-, --;-th:-e-s-eC":tt-:-in-g-'
is finished,
If youjusl wonllo moke Ihis lunction selfino, you could
01[' hOld down Ihe Select button lor 3 secondS 10 bock to
~
I he moin screen,

In setting screen, press the Select button 8 times
to e nte r the over heat warning light(W ater
temperature) setting screen.
,~~ ------=-----...
Press the Adjust button to choose the setting
number.
EX. Now the over heat warning light (Oil
temperature) setting is 90.0°C.
& Now the oil temperature logo and the settin
number are flashing!
T he temperature logo
on LCD will flash when the
temperature re ached your
#.;-- .. -...... ~ •
'.
..."
r- 1
~
setting. . .
Press the Adjust button to choose the setting
number.
EX. Now the over heat warning (Water
temperature) setting is 90.0°C.
& Now the water temperature logo and the
setting
number are flashing'
~ The over heat warning light setting
range.
60- 250°C (140-482°F).
Setting unit.' 1°C fF).
& The setting unitwill change together with the
temperature unit setting(4-3 ).
Press the Select button to enter the over heat
warning light (Oil temperature) setting.
EX. ~ow the setting is changed from 90.0°C to
95.0 C.
~ The over heat warning light setting
range: 60- 250°C (140-482°F).
Setting unit 1°C f F).
Pre ss the Select button to cont inue the function
setting.
EX. Now the setting Is changed from 90.0°C to
95.0
oC.
~ W:-:-::-h en y -u le-av-e e-e-n-, -th-e-se-tt-' 'n g - - - -o -'- - t:"Ch"""Cis-s-c-r - -- ~
is finished.
ll)
If youjusl wanlla make this function setti ng . you could
<1[' hold down Ihe S e/ec l buff on for 3 secondS to bock fa
the main scr een.

4 -7 Tire circumference and sensor point setting
In setting screen, press the Select button 10 times
to enter the Tire circumference and sensor point
setting screen,
~CAan::Q
• Please measure the tire circumference [The
tire you will install
the sensor on} and make
sure the number of magnet sensor point [You
could install the magnet into the disc screw
or the sprocket screw.)
.The speed displayed on the meter will be
affected by the setting, please make sure the
setting
number is correct before you make
the setting.
Press the Adjust button to choose the setting
number,
EX. Now the tire circumference setting is 1,000
mm, and the sensor pOint is 1,
it. Now the circumference setting number is
flashing!
~ The tire circumference setting range:
300-2,500 mm. Setting unit,' 1 mm.
(ji) If youjust want fa check your setting, you could hold down
~ the Setect bullon tor 3 seconds fa back to the main screen.
# .......... .
l ' ~
: \ E- J
'
, ' - -
... '''1110 ,, ~ .
~ ""' ....
, ........... .
,
l G, 1
\ ~ I
\,.. ,,'" .... ,"':
... "" ...
e
Press the Select button to enter the sensor point
setting,
EX. The circumference setting is changed from
1,000 mm to 1,300 mm.
Press the Adjust button to choose the se tting
number.
Now the sensor point setting number is
flashing!
~ The sensor point setting range: 1-60
paints,
Press the Select button to continue the function
setting,
EX, the sensor point setting is changed from 1 P
to 6 P
~ When you leave this screen, the setting
is finished.
ll)
It you just wont to make this function selting. you could
hold {jown the Sefect button for 3 secondS to bOCk fa
the main screen

4-8 The clock setting B
.;,.". .......... .
In setting screen, press the Select button 12
times to enter the clock setting screen.
/ ~ 1
\ I
~'... "' ~- .
.... ...... t
Press the Adjust button to choose the setting
number.
EX. Now the time is 0 .' 00 .
& Now the hour number IS /Jashmg!
~ This is a 24 H clock .
Press the Select button to enter the minute
setting.
EX. Now the hour is changed from 0 to 13.
Press the Adjust button to choose the setting
number.
& Now the mmute number IS f1ashingl
Press the Select button to continue the function
setting.
EX . the minute is changed from 0 to 1.
~ When you leave this screen, the setting
is finished.
/I youjust wont to make I his function sefflnq. you could
:'1[' hold down the Select button for 3 secon dS to bock to
(l) the
main screen.
4-9 The fuel gauge resistance and insufficient fuel warning setting
In setting screen, press the Select button 14
times
to enter the fuel gauge resistance and
insufficient fuel warning sefting screen.
Press the Adjust button to choose the setting
number.
EX. Now the fuel gauge resistance setting is 1 DC
n and the insufficient setting is 30 %.
& Now the resistance setting number is flashing,
~ The fuel gauge resistance setting rangE
: 100 n. 510 n.
If you don't install the fuel wiring, the
fuel
gauge will not display
rI'J If youjust want to check your setti ng . you cou ld hold down
~~ the Select button for 3 seconds to back to Ihe ma in screer
- f ~$«
Usually the fuel gauge resistance is 100 n on YAMAHA
system, and 510 n on HONDA system.
The ins ufficient fuel warning setting: When the fuel is
le ss than your setting, the fuel level gauge will flash to
warn
yo u.
Press the Select button to enter the insufficient
warning setting.
EX. Now the fuel reSistance setting is changed
from 100 n to 510 n.

4 -1 0 The target speed timer 1 target distance timer setting 7'~s
4-9 The fuel gauge resistance and insufficient fuel warning setting @
Press the Adjust button to choose the setting
number.
Lt. Now the insufficient setting number is flashlng!1
~ The insufficientfuel warning setting
range: 10-50 %. Setting unit: 10 Yo .
Press the Select button to continue the function
setting.
E X. the setting is changed from 30 % to 20 %.
~ When you leave this screen, the setting
is finished.
If YOu just wont to make t/ils tunction settinq. you could
<It' hold down the Select button tor 3 secondS to bo ck to
fl) the main screen.
" ......... .
:" (~ 1
: l ..... \I I ...
. --
~, ." 'I \ '"
......... ' ....
In setting screen press the Select button 16
times to enter the target speed timer setting
screen.
Press the Adjust button to choose the setting
number .
E X. The target speed timer setting is 0-50 kmlh
and the target distance timer setting is 11 32 milE
(50 M).
Lt. Now the _ and target speed number is
flashing!
~ The target speed timer setting range:
30-360 km lh (20- 220 MPH).
Setting unit: 5 km lh (MPH).
Lt. The setting unit will change together with the
speed unit setting (4-1).
Press the Select button to enter the target
distance timer warn ing setting.
EX. Now the target speed timer is changed frorr
0-50 kmlh to 0-110 kmlh.
Press the Adjust button to choose the setting
number.
Lt. Now the Il!ll!! and target distance number is
flashing!
~ The target distance timer setting range
50-1,000 M (1132-20/3 2 mile).
Setting unit:
50 M (1/32 mile).

I
4-10 The target speed timer 1 target distance timer setting 1'cW~
TEST
Press the Select button to continue the function
setting.
EX. Now the target distance timer setting is
changed from 1132 mile (50 M) to 2132 mile
(100 M).
~ ;-;-~-;;:h:-:e:-:n~y-=-o~u:-:/~e-=-av:-:e~th;:-i;:-s -'-sc;:-r-=-e-e-n-, 7.th-e-se"""tt"" in - g ----,
is finished.
If youjust wont to make this function sel1ina. YOU cou ld
'I[ . hOld down the Select button for 3 secondS to bock to
(l) the main screen.
5-1 1'~: Target speed timer test
""~~'ili"LIt!Cffi
Please use this function at racetrack to avoid
traffic accidents.
In power test screen, press the Select button on!
time to enter the target speed timer test screen.
~ Please start the test when the bike stops.
,#~-- ........ .
,
: I '
•
1 'I'
\~ ~ ~'''~
" .......
[~
it.Ifyou have the power test record, it will
display the
record first. You must clear the
record before starting a new test.
Press the Adjust button to clear the record and
enter the target speed timer test screen.
E
X. Now you could see-the record you have
before. It displays the target speed timer setting
as 0- 110 km / h, the test result: 19"20 seconds.
The top speed is 110 kmlh during the test" The
MAX RPM is 10,000 RPM during the test.
(ji] If YOU just wont to Check tile record. you cou ld hOld down
U the Select button for 3 seconds to bock to the main screen.
When the bike moves, the timer will start
automatically.
it. Now the _ Is flashing!
~ About the power test setting, please
check 4-10 .

5-1 ~: Target speed timer test
'~~t5km/h ~km/h &Peed UQlP10 km/h
The timer is automatic , so when ~ ~ ~
your bike start to move the 0 0 1\ 0 1\ 0 1\
timer will start to count the time
and stop automatically after you IiID lIm IiID
stops the . SETSETS8 888ffB8 8838B8
.& Duong the test- the _will keep flashing!
When
you reach the target speed you set {O-
110 km/hJ the timer wi/r stop counting (19"20
second).
r'Il If you Just want to use the function one time, hOld down
LV 1!;5c~~'5'fl~:4b?/? ;g:e~~econds to save the records ond
If you want to test it again , press the Adjust
button
to clear the record and enter the target
speed timer test screen again.
W' failure
-~~t5km/h ~km/h &peedUP(5e~f
If you don't reach the target
speed or stop accelerating 0 0 ~ 0 ~ 0
during the test, you could press
the Adjust button to stop the IiID IiID IiID
timer. Then you could press the 888ET88 8/J8 B B8 8ET8Ef88
Adjust button one time to clear
the record and enter the target speed timer test screen.
5-2 ?~: Target distance timer test
.. , ~ rt!Y.UII~ceJJ
Please use this function at racetrack to avoid
traffic accidents.
In power test screen, press the Select button 2
times to enter the target distance timer test
screen.
~ "'P"'/e:-:a""s-=-e -= th:-:e'-:t'-::e -::C
s
t
o
-'--'--s. s"'ta:C:r'"t"" st"'w"'hre-=-n=-r;thCe~b"ik-:e-C
7
::C
p
.& If you have the power test record, it will
display the record first. You must clear the
record before starting a new test,
Press the Adjust button to clear the record and
enter the target distance timer test screen.
EX. Now you could see the record you have
before, It displays the target speed timer setting
as 2/32
mile {100 MJ the test result: 10"27
seconds, The top speed is 63 km/h during the
test., The MAX RPM is 8,000 RPM during the test.
r'Il If you just want to check the record, you could holddown
LV the Select button for 3 seconds to bock to the main screen
When the bike moves , the timer will start
automatically
.& Now the _ IS flashing!
~ About the power testsetting, please
check 4-10.

5-2 1'~ : Target distance timer test
- '~~~088Bl3El®OEl88Ba~Peed upm0f1"BB El
The timer is automatic, so when ~ ~ ~
your bike start to move the
timer will start to count the time 0 0 0 0
and stop automatically after you
stops
the . 0 M' '100 m
& OUTIng the test, the rawil' keep nashmg!
When you
reach the target distance you set
(100 M .2/32 mile), the timer will stop counting
(10"27 second).
llJ
It you juSI wont to use the function one lime , hold down
~ • tHe Setect button tor 3 seconds to save the records ond
. bOC k to th e main screen.
If you want to test it again, press the Adjust
button to clear the record and enter the target
speed timer test screen again .
, ~~ ~ ~ ~
If you don't Ifni,h the tatget (5'8®~'~®~d U,®B8
distance test or stop
accelerating during the test, 0 0 0 0
you could press the Adjust TI t
button to stop the timer . 0 M' fai/~~
Then you could press the Adjust button one t ime to clear the record and
enter the target distance timer test screen.
I 5-3
1'~: The to p speed test
&.1W !y.I.'"t'reJJ
Please use this function at racetrack to avoid
traffic accidents.
In power test screen, press the Select button 3
times to
enter the top speed test screen.
~ Please start the test when the bike stops.
& If you have the power test record, it will
display the
record first. You must clear the
record before starting a new test.
Press the Adjust button to clear the record and
enter the top speed test screen.
EX. Now you could see the record you have
before. It displays the top speed is 180 km /h, thc
distance to reach the top speed is 510 M The
MAX RPM is 10,000 RPM during the test, the timc
you need to reach the top speed is 10"20
seconds.
r'jfJ It youjust wont to check the record . you could hOld down
I~ the Setect button tor 3 seconds to bock to the main screer
When the bike moves, the timer will start
automatically.
& Now the _ is flashing!
~ The top speed test range.'
Speed:
0-360 km/h Distance: 0-999
M (3280 feet) RPM. 0-10,000/20,000
RPM. Timer: 0-9'59" 99 seconds.
& The settinr;;;, unit will change together with thE
speed unit setting (4-1).

5-3 v>~ : The top speed test
, ~~---------".
The timer is automatic, so 0 km/h 3 km/h Speed up 180 km/h 179 km/h
when your bike start to ~ ®® ~hen the speed
th t·
'11 t t ~ ~ ~ decreases,
move elmer WI s or the timer
to count the time and 0 0 0 0 will stop.
stop automatically after
you stops the bike. 0 M' '510 m
mIJ mIJ mIJ
BBBBEiB 088.9'B8 B[f3D8a
& During the test, the _will keep flashing!
When you
reach the top speed (180 km/h), the
meter will stop counting the distance (510 M),
fIJ"' .. • .. -~ •
.
l ' 'r- 1
and time (10"20 seconds).
\ ' ,
.
I( youjust want to use the (unction one time, hold down
• ~""!II~": -;'
~ ~-
•
'1[' the Select buffon (or 3 seconds to save the records and
~ back to the main screen.
If you want to test it again, press the Adjust
button to clear the record and enter the target
speed timer test screen again.
6 Trou ble sh~~JiJ] g
The following situation do not indicate malfunction of the meter.
Please
check the following before taking it in for repair .
.
Check item
The meter doesn't work when eThe power doesn'tsupply to the meter.
~Please make sure the wiring is
connected. The wiring and fuse are not
broken.
~ The battery is broken or the battery is toe
old to supply enough power DC 12V to
make the meter work.
ePlease check the voltage of your
battery, and make sure the voltage is
over DC12V.
ePlease make sure the speed sensor is
connected correctly
ePlease check the tire-size setting.
~please refer to the manual 4-1.
ePlease check the RPM sensor wiring is
connected correctly.
ePlease check the spark plug is R type
or not. If not, please replace the spark
plug with the R type spark plug.
ePlease check your setting.
~Please refer to the manual 4-2.
ePlease check your fuel tank.
~/s there any fuel inside?
ePlease check the wiring.
~Do you connect the wiring correctly?
ePlease check the setting.
~Please refer to the manual 4-9.
ePlease check the sensor.
~Does the wiring break or falling off?
eDo you connect the wiring correctly
~Please check the positive wire (Red)
connects to the battery, and main
switch positive wiring (Brown) connects
to the main switch.
the
power is on.
The meter shows wrong
information.
Speed does not appear or
appear incorrectly
Tachometer does not
appear or appear
incorrectly.
Fuel gauge does not
appear or appear
incorrectly
Temp does not appear or
appear incorrectly.
The clock is incorrect.
*If still can't solve the problems according to the steps above, please
contact with distributors or us.

,,,,,,,.sT~L L~T'O"""
1-1 Accessory
DMeterX1
r:l Temp sensor wire X 2
ID D
Dil
r:I M8 / S type speed
U sensor bracket X 1
m3 mm spanner X 1
mM6 X 35L screw X 2
~ M6 gasket X 2
IE) Main wmng X 1
nPT1/8 water temp
1:.1 sensor X 2
m M10 / S type speed
~ sensor bracket X 1
m Meter bracket X 1
mM8 X 30L screw X 2
~ M8 gasketX 2
B RPM wire (Type A)X 1
6 ActIVe speed sensor
m M5 X 5L hexagonal
W boltX2
m M4 screw X3
m M6screWX2
~ ManualX2
~ Please contactthe l oc aldIstrIbutor nthe Items you open are notthe same, wIth the abOve- Hsted one.
1-2 Option accessory
D
Digital speed signal
sensor
n L type speed sensor
~bracket
~ Temp sensor
L
M10XP1.0
M12 XP1.5
M14XP1.25
M14XP1 .5
M16XP1.5 / M1BXP1.5
E'I Digital speed s!gnal
U sensor
r;) 011 temp sensor adopter
M12XP1.5 X 15L
M14XP1.2 5X 15L
M14XP1.5X 15L
M16XP1.5X15L
M18XP 1. 5X15 L
M
20X P1 . 0X 15L
M 20 XP1 . 5X 15L
m Temp sensor wire set
~ (2M)
ID D
Dil
n Dlgllal speed signal
1:,1 sensor
~ UN~R
IIIC"I Water temp
U sensor adopter
~
M14
M16.M1B
M22.M26mm
DRPM wire(Type 8) X 1
~ Mid-way connect X 11
m2.5 mm spanner X 1
m M4 gasket X 3
@
~ M8 screw X 2
... Dlgdal speed signal
IWIsensor
~ SR
~ X-FIGHT
BOOSTER
n Cylinder head
1:1 temp sensor
~ Some of the optIon accessorIes maynot se". For the deta il s, please contact the local dIstributor.