Kozyard KZBBQGLB User manual

Assembly Manual
8’x5’ BBQ gazebo
Kozyard LLC Products
www.kozyard.com
©
Copyright 2016 - 2023 Kozyard LLC. | All Rights Reserved.
Version:20231006

1
• Prior to assembly, ensure that you lay out and identify all the parts listed in
the parts list.
• Tighten all nuts and bolts securely. Hand-tighten all bolts before use. Avoid
using power tools or applying excessive force during assembly and bolt tight-
ening.
• Install at a minimum distance of 6 feet from any obstructions, such as fences,
garages, houses, overhanging branches, laundry lines, or electrical wires.
• It is recommended to be at least 2 people for a safe assembly of the
product.
• If you encounter any difficulties during assembly or if any part is missing or
damaged, please don't hesitate to contact our customer service team via
email at [e-mail] or by calling our toll-free number at
866-355-0018.
Assembly Instructions
Care and warranty
• This product is designed for grill shelter purposes only under relatively normal
weather conditions. Extremely high winds, heavy rain, or hail can cause severe
damage to the canopy and canopy frame. It is the consumer's responsibility to
protect this product against weather-related damages. The venting at the top of
the canopy is suitable for handling moderate weather events.
• Clean the frame components and fabric with a mild soap solution, then rinse
thoroughly. Avoid using bleach, acid, or any other solvents on either the fabric or
frame components.
• For a comprehensive warranty policy, please visit www.kozyard.com. Be aware
that warranty terms can change without prior notification.
• For the best performance and safety of your chair, inspect and tighten all bolts
and fasteners regularly
• In the face of extremely strong winds or heavy precipitation, it's crucial to either
remove or loosen the canopy to release wind pressure. Carefully monitor the
situation during the weather event and take appropriate action. Secure the
gazebo to something immovable to prevent it from becoming airborne.

2
4pcs
SAFETY GOOGLE
GLOVES
STEPLADDER
SAFETY HAT
Part list
Required Tools (Not included)

X4
3
Step 1:
Step 2:
Main frame assembly
Canopy frame assem-

Attach side shelves to the main frame
6
4
Step 3:
Step 4:
Secure canopy frame to the
main frame

mini canopy
main canopy
4
5
Step 5:
Attach main and mini canopies and secure to ground
Caution: Use a sturdy stepladder to attach
the main canopy first, followed by the mini
canopy.
Use the provided ground stakes for lawns. If
you are securing to decks or hard surfaces,
please use the appropriate hardware (SOLD
SEPARATELY).

866-355-0018
Kozyard LLC
© Copyright 2016 - 2023 Kozyard LLC. | All Rights Reserved.