Kwikset 665 User manual

Parts in the boxRequired tools
Latch Strike ScrewsKeys
DeadboltSmartKey® tool
(SmartKey locks only)
23/8" (60 mm)
or
23/4" (70 mm)
13/8"–21/4"*
35 mm–57 mm*
21/8"
54 mm
61876 / 01
665
BC DE
G
F
Hold the latch in front of the
door hole, with the latch face
lush against the door edge.
If the D-shaped hole is centered
in the door hole, no adjustment
is required. Proceed to step 4.
If the D-shaped hole is NOT
centered, adjust latch. See “Latch
Adjustment” (step 3C).
Latch Adjustment (only if needed)
180°
23/8" (60 mm)
23/4" (70 mm)
Backset
Centerline
13/8" (35 mm)
13/4" (44 mm)
21/4" (57 mm)
Edge of the door
Fold
Drilling Template
Instructions continue on reverse
A
B
C
*Call Kwikset to order
a service kit for 21/4"
(57 mm) thick doors.
Template is only needed if a new hole must be drilled in the door.
not centered
centered
1"
25 mm
Installation Guide
Face of the door
Rotate the front of the
latch to extend it.
D-shaped hole
Additional tools (if needed)
wood block
or
o
AK
A / K
A / K
HJ
Prepare door and check dimensions
1
Extend latch bolt
2
Adjust the backset of the latch (if needed)
3

H
J
E (2x)
B
Make sure hole for strike
is drilled a minimum
of 1" (25 mm) deep.
A
A
B
B
Install
deadbolt
exterior.
Install deadbolt interior.
Rotate torque
blade to align with
D-shaped hole.
Insert interior torque
blade into exterior
torque blade.
F (2x)
Latch with
rectangular
faceplate
Latch with
drive-in collar
“UP” is on top
“UP” is on top
Retract
latch bolt.
Install
latch.
Install latch.
wood block
Extend latch bolt.
A
AK
K
D (2x)
Secure latch with screws.
or
The cylinder with holes
should be installed on the
interior side of the door.
WARNING: This Manufacturer advises that no lock can provide
complete security by itself. This lock may be defeated by forcible or
technical means, or evaded by entry elsewhere on the property. No lock
can substitute for caution, awareness of your environment, and common
sense. Builder’s hardware is available in multiple performance grades to
suit the application. In order to enhance security and reduce risk, you
should consult a qualiied locksmith or other security professional.
IMPORTANT PRECAUTIONS FOR DOUBLE CYLINDER
MODELS. ONCE INSTALLED; 1. Keep key in the interior
lock (or within reach) for emergency exit when home is
occupied. 2. Remove key when home is unoccupied.
Install latch
4
Install deadbolt
5
Install strike on door frame
6
Rely on premium home doors & windows by Kwikset if you’re looking for quality and efficiency.