Legrand Tx3 6000 a User manual

1/49

87045 LIMOGES Cedex

Telephone: +33 5 55 06 87 87 –FAX: +33 5 55 06 88 88

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

CONTENTS PAGE

1. Description - Use.................................. 1

2. Range .................................................. 1

3. Overall dimensions............................... 1

4. Preparation - Connection...................... 1

5. General Characteristics ........................ 3

6. Compliance and approvals ..................35

7. Curves................................................. 36

8. Auxiliaries and accessories ................. 49

1. DESCRIPTION - USE:

. Thermal-magnetic circuit breaker (MCB) for control, disconnection

and protection of electrical circuits against overcurrents

Symbol:

Technology:

. Current limiting circuit-breaker

. 1 module per pole. Each pole is 17,7 mm wide

2. RANGE

Polarity:

. 1P / 1P+N right side / 2P / 3P / 4P

Rated currents, In:

. B curve: 1 / 2 / 3 / 4 / 6 / 8 / 10 / 13 /16 / 20 / 25 / 32 / 40 / 50 / 63A

. C and D curves: 0.5 / 1 / 2 / 3 / 4 / 6 / 8 / 10 / 13 /16 / 20 / 25 / 32 /

40 / 50 / 63A

Magnetic tripping curves:

. B Curve (between 3 and 5 In)

. C Curve (between 5 and 10 In)

. D Curve (between 10 In and 17 In)

Thermal threshold according to IEC/EN 60898-1:

. Non operating current (Inf): 1.13 In.

. Operating current (If): 1.45 In.

Rated Voltage and Frequency:

. 240 V ~ / 415 V~ - 50 / 60 Hz with standard tolerances.

. 80 V per pole DC current.

Maximum operating voltage:

. 440 V ~ with possible derating of the breaking capacity

Breaking capacity:

. 6000 A in accordance with standard IEC/EN 60898-1

3. OVERALL DIMENSIONS:

X

1P

17.7 mm

1P+N / 2P

35.4 mm

3P

53.1 mm

4P

70.8 mm

4. PREPARATION - CONNECTION

Mounting

. On symmetric IEC/EN 60715 or DIN 35 rail.

Operating positions:

.Vertical Horizontal Upside down On the side

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

2/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

4. PREPARATION - CONNECTION

(continued)

Connection:

. Inputs and outputs via screw terminals

. Cage terminals, with release and captive screws

. The location of the terminals allows supplying by pin busbar both

sides and fork busbar lower side.

Module maintenance :

. MCBs are equipped with a din rail clamp which facilitates the

removal of the circuit-breaker from the din rail in case of

maintenance or replacement without the need to disconnect the

entire supply line.

A circuit breaker may be replaced in the middle of a supplied fork

busbar row without disconnecting the other products.

This method is available for the 1 pole, 2-poles, 3-poles, 4-poles

devices.

4. PREPARATION - CONNECTION

(continued)

Power supply:

. Either from the top or the bottom

Terminal depth:

. 14 mm

Stripping length recommended:

. 11 mm

Screw head:

. Mixed, slotted and Pozidriv 2.

Tightening torque:

. Recommended: 2.5 Nm.

. Mini: 2 Nm. Maxi: 3 Nm.

Required tools:

. For the terminals: Pozidriv n°2 or flat screwdriver 5.5 mm (6 mm

maximum).

. For fixing: flat screwdriver 5.5 mm (6 mm maximum).

Connectable section:

Copper cables

Without ferrule

With ferrule

Rigid cable

1 x 1.5 mm² to 35 mm²

2 x 1.5 mm² to 16 mm²

-

Flexible cable

1 x 1.5 mm² to 25 mm²

2 x 1.5 mm² to 10 mm²

1 x 1.5 mm² to 25 mm²

Manual actuation of the MCB:

. Ergonomic 2-position handle

. "I-ON": Device closed

. "O-OFF": Device open

Contact status display:

. By marking of the handle

- "O-OFF" in white on a green background = contacts open

- "I-ON" in white on a red background = contacts closed

Sealing:

. Possible in ʺOpenʺ position (OFF) or ʺCloseʺ position (ON).

Locking:

. By 5 mm padlock (cat. N° 4 063 13) or 6 mm padlock (cat. N° 0 227

97) with padlock support (cat. N° 4 063 03).

Labelling:

. Identification of the circuit by insertion of a label in the label holder.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

Unscrew the

terminals

completely

Put the clamp in

the unlocking

position with a

screwdriver

Pull the device

upward

Pull the device

downward in order

to release it

completely from

the prongs of the

busbar. Then pull

the device forward.

3/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS:

Neutral earthing system:

. IT, ITT, TN

Marking on the front side:

. By permanent ink pad printing:

-Trade name: TX3

-Breaking curve

-Rated current (in A)

-Icn in A rated breaking capacity in accordance with

IEC/EN 60898-1 (in a box)

-Limiting class “3” ( in a square) [no for D curve]

-Legrand reference code, and Logo .

-Brand: Legrand.

Short-circuit breaking capacity:

. Alternate current 50/60Hz, single-phase or three-phase network, in

accordance with standard: IEC/EN 60898-1

Un

1P

1P+N / 2P

3P / 4P

110 V~

Icn

10000 A

16000 A

-

230 V~

6000 A

10000 A

400 V~

-

6000 A

440 V~

-

4500 A

110 V~

Ics

75% of Icn

230 V~

400 V~

440 V~

Short-circuit breaking capacity of only one pole:

. Three-phase network 220 / 380 V~ to 240 / 415 V~

-in TN neutral system, Icn1 = 10 kA (under 220 to 240 V~)

-in IT neutral system, Iit = 3 kA (under 380 to 415 V~)

. Three-phase network 110 / 220 V~ to 120 / 240 V~

-in TN neutral system, Icn1 = 25 kA (under 110 to 127 V~)

-in IT neutral system, Iit = 6 kA (under 220 to 240 V~)

Minimum operating voltage:

. 12 V a.c. / d.c. per pole.

Pulse rated voltage:

. Uimp = 4 kV

Insulation rated voltage:

. Ui = 500 V

5. GENERAL CHARACTERISTICS

(continued)

Pollution degree :

. 2 in accordance with standard IEC/EN 60898-1.

Electric strength:

. 2500 V

Operation at 400 Hz:

. The magnetic thresholds increase by 45%.

Load to close and to open a pole trough the handle:

. 0.1 Nm per pole to close.

. 0.075 Nm per pole to open.

Mechanical endurance:

. 20000 operations without load.

. 10000 operations with load (under In*cos = 0.9).

. 2000 operations under In, DC current.

Enclosure material:

. Polyester.

. Characteristics of this material: self extinguishing, heat and fire

resistant according to EN 60898-1, glow-wire test at 960°C for external

parts made of insulating material necessary to retain in position current-

carrying parts and parts of protective circuit (650°C for all other external

parts made of insulating material).

Average weight per pole:

. 0.150 kg.

Volume when packed:

Volume (dm³)

Single pole (packed per 10)

1.628

Double pole & 1P+N

(packed per 5)

1.628

Triple pole / Four pole

0.720

Ambient temperatures:

. Operation: from –25 ℃ to + 70 ℃

. Storage: from –40 ℃ to + 70 ℃

Degree or class of protection:

. Protection index of terminals against solid and liquid bodies: IP 20

(wired terminals), (in accordance with standards IEC 529, EN 60529

and NF C 20-010).

. Protection index of the box against solid and liquid bodies: IP 40 (in

accordance with standards IEC 529, EN 60529 and NF C 20-010).

. Protection index against mechanical shocks: IK 02 (in accordance with

standards EN 50102 and NF C 20-015).

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

4/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued)

Sinusoidal vibration resistance in accordance with

IEC 60068.2.6:

. Axis: x, y, z.

. Frequency range: 5÷100 Hz ; duration 90 minutes

. Displacement (5÷13,2 Hz) : 1mm

. Acceleration (13,2÷100 Hz) : 0,7 (g=9,81 m/s2)

Power dissipated per pole (W) :

. Circuit breaker B curve

In

1 A

2 A

3 A

4 A

6 A

8 A

10 A

1P÷4P

2

1.1

1.4

1.8

In

13 A

16 A

20 A

25 A

32 A

40 A

50 A

1P÷4P

1.9

2

2.2

2.7

3.2

4

4.5

In

63A

1P÷4P

5.5

. Circuit breaker C & D curves

In

0.5 A

1 A

2 A

3 A

4 A

6 A

8 A

1P÷4P

1.7

2

1.1

1.4

In

10 A

13 A

16 A

20 A

25 A

32 A

40 A

1P÷4P

1.8

1.9

2

2.2

2.7

3.2

4

In

50 A

63A

1P÷4P

4.5

5.5

. Impedance per pole (Ω) = P dissipated

In2

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

5/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Derating of circuit-breakers according to ambient temperature :

. The nominal characteristics of a circuit breaker are modified according to the ambient temperature inside the cabinet or the enclosure where the

circuit breaker is located.

. Reference temperature: 30 °C in accordance with IEC/EN 60898-1

Ambient Temperature / In

In (A)

- 25°C

- 10°C

0°C

10°C

20°C

30°C

40°C

50°C

60°C

70°C

0,5

0.62

0.6

0.57

0.55

0.52

0.5

0.47

0.42

0.40

0.38

1

1.5

1.4

1.3

1.2

1.1

1

0.9

0.8

0.7

0.6

2

2.8

2.6

2.5

2.3

2.2

2

1.9

1.8

1.7

3

3.8

3.6

3.5

3.3

3.2

3.0

2.9

2.8

2.7

2.6

4

4.5

4.2

4.0

3.9

3.7

3.5

3.4

3.3

3.2

3.1

6

7.5

7.0

6.6

6.4

6.2

6.0

5.8

5.6

5.4

5.3

8

9.6

9.2

8.9

8.6

8.3

8

7.8

7.5

7.3

7

10

12.5

11.5

11.1

10.7

10.3

10.0

9.7

9.3

9.0

8.7

13

16.3

15

14.3

13.9

13.4

13

12.6

12.1

11.7

11.3

16

20.0

18.7

18.0

17.3

16.6

16.0

15.4

14.7

14.1

13.5

20

25.0

23.2

22.4

21.6

20.8

20.0

19.2

18.4

17.6

16.8

25

31.5

29.5

28.3

27.2

26.0

25.0

24.0

22.7

21.7

20.7

32

41.0

37.8

36.5

34.9

33.3

32.0

30.7

29.1

27.8

26.5

40

51.0

48.0

46.0

44.0

42.0

40.0

38.0

36.0

34.0

32.0

50

64.0

60.0

57.5

55.0

52.5

50.0

47.5

45.0

42.5

40.0

63

80.6

75.6

72.5

69.9

66.1

63.0

59.8

56.1

52.9

49.7

Derating of MCB for use with fluorescent lights:

Ferromagnetic and electronic ballasts have a high inrush current for a short time. These currents can cause the tripping of circuit breakers.

At the time of the installation, it should take into account the maximum number of ballasts per circuit breaker that the manufacturers of lamps and

ballasts indicate in their catalogues.

Influence of the altitude:

≤2000 m

3000 m

4000 m

5000 m

Dielectric holding

3000 V

2500 V

2000 V

1500 V

Max operational Voltage

400 V

Derating at 30°C

none

Derating of MCBs function of the number of devices side by side:

When several MCBs are juxtaposed and operate simultaneously, the thermal evacuation of the poles is limited. This results in an increase in

operating temperature of the circuit breakers which can cause unwanted tripping. It is recommended to apply the following coefficients to the rated

currents.

Number of circuit breakers

side by side

Coefficient

2 - 3

0.9

4 –5

0.8

6 - 9

0.7

10

0.6

These values are given by the recommendation of IEC 61439-1, NF C 63421 and EN 61439-1 standards.

To avoid using these coefficients, it is necessary to allow a good ventilation and to separate the devices with 0.5 module spacing elements (cat. N°

4 063 07).

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

6/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between circuit-breakers and fuses, three-phase network (+ neutal) 400 / 415 V~ according to IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected

between phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

Fuse upstream

gG Type

m.c.b. downstream

≤20A

25A

32A

40A

50A

63A

80A

100A

125A

160A

TX36000A

B, C & D Curves

<6A

100kA

40kA

6A

100kA

40kA

10A

100kA

40kA

13A

-

100kA

40kA

16A

-

100kA

40kA

20A

-

100kA

40kA

25A

-

100kA

40kA

32A

-

100kA

40kA

40A

-

100kA

40kA

50A

-

100kA

40kA

63A

-

100kA

40kA

Fuse upstream

aM Type

m.c.b. downstream

≤20A

25A

32A

40A

50A

63A

80A

100A

125A

160A

TX36000A

B, C & D Curves

< 6A

100kA

40kA

6A

100kA

40kA

10A

100kA

40kA

13A

-

100kA

40kA

16A

-

100kA

40kA

20A

-

100kA

40kA

25A

-

100kA

40kA

32A

-

100kA

40kA

40A

-

100kA

40kA

50A

-

100kA

40kA

63A

-

100kA

40kA

According to the curves and ratings of circuit breakers, attention to the threshold and size of upstream fuse which must necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

7/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers, three-phase network (+ neutal) 400 / 415 V~ according to IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected

between phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.b. upstream

DX36000A/10kA

B and C Curves

D Curve

m.c.b. downstream

≤25A

32A

40A

50A

63A

≤25A

32A

40A

50A

63A

TX36000A

B, C & D Curves

<6A

10kA

6A

10kA

10A

10kA

13A

10kA

16A

10kA

20A

10kA

25A

-

10kA

-

10kA

32A

-

10kA

-

10kA

40A

-

10kA

-

10kA

50A

-

10kA

-

10kA

63A

-

m.c.b. upstream

TX310000A

B Curve

C Curve

m.c.b. downstream

≤25A

32A

40A

50A

63A

≤25A

32A

40A

50A

63A

TX36000A

B, C & D Curves

<6A

10kA

6A

10kA

10A

10kA

13A

10kA

16A

10kA

20A

10kA

25A

-

10kA

-

10kA

32A

-

10kA

-

10kA

40A

-

10kA

-

10kA

50A

-

10kA

-

10kA

63A

-

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

8/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers, three-phase network (+ neutal) 400 / 415 V~ according to IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected between

phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.b. upstream

DX310000/16kA

B and C Curves

B, C and D Curve

m.c.b. downstream

≤25A

32A

40A

50A

63A

80A

100A

125A

TX36000A

B, C & D Curves

<6A

16kA

6A

16kA

10A

16kA

13A

16kA

16A

16kA

20A

16kA

25A

-

16kA

32A

-

16kA

40A

-

16kA

50A

-

16kA

63A

-

16kA

m.c.b. upstream

DX325kA

B, C and D Curves

m.c.b. downstream

≤25A

32A

40A

50A

63A

80A

100A

125A

TX36000A

B, C & D Curves

<6A

16kA

6A

16kA

10A

16kA

13A

16kA

16A

16kA

20A

16kA

25A

-

16kA

32A

-

16kA

40A

-

16kA

50A

-

16kA

63A

-

16kA

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

9/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers, three-phase network (+ neutal) 400 / 415 V~ according to IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected

between phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.b. upstream

DX336kA

DX350kA

C Curve

B, C and D Curves

m.c.b. downstream

≤25A

32A

40A

50A

63A

80A

≤25A

32A

40A

50A

63A

TX36000A

B, C & D Curves

<6A

25kA

36kA

6A

25kA

36kA

10A

25kA

36kA

13A

25kA

36kA

16A

25kA

36kA

20A

25kA

36kA

25A

-

25kA

-

36kA

32A

-

25kA

-

36kA

40A

-

25kA

-

36kA

50A

-

25kA

-

36kA

63A

-

25kA

-

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

10/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and MCCBs, three-phase network (+ neutal) 400 / 415 V~ according to

IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected between

phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.c.b. upstream

DPX 125

16kA

m.c.b. downstream

16A

25A

40A

63A

100A

125A

TX36000A

B, C & D Curves

<6A

16kA

6A

16kA

10A

16kA

13A

16kA

16A

-

16kA

20A

-

16kA

25A

-

16kA

32A

-

16kA

40A

-

16kA

50A

-

16kA

63A

-

16kA

m.c.c.b. upstream

DPX 125

25 –36kA

m.c.b. downstream

16A

25A

40A

63A

100A

125A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

-

25kA

20A

-

25kA

25A

-

25kA

32A

-

25kA

40A

-

25kA

50A

-

25kA

63A

-

25kA

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

11/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and MCCBs, three-phase network (+ neutal) 400 / 415 V~ according to

IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected between

phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.c.b. upstream

DPX3160 / DPX3160 + RCD

16kA

m.c.b. downstream

16A

25A

40A

63A

80A

100A

125A

160A

TX36000A

B, C & D Curves

<6A

16kA

6A

16kA

10A

16kA

13A

16kA

16A

-

16kA

20A

-

16kA

25A

-

16kA

32A

-

16kA

40A

-

16kA

50A

-

16kA

63A

-

16kA

m.c.c.b. upstream

DPX3160 / DPX3160 + RCD

25 –36 –50kA

m.c.b. downstream

16A

25A

40A

63A

80A

100A

125A

160A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

-

25kA

20A

-

25kA

25A

-

25kA

32A

-

25kA

40A

-

25kA

50A

-

25kA

63A

-

25kA

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

12/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and MCCBs, three-phase network (+ neutal) 400 / 415 V~ according to

IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected between

phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.c.b. upstream

DPX 250ER

DPX3 250 / DPX3 250 +RCD

(Thermal-magnetic & electronic)

25 - 36 - 50kA

25 - 36 –50 - 70kA

m.c.b. downstream

100A

160A

250A

100A

160A

200A

250A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

25kA

25k

25kA

20A

25kA

25A

25kA

32A

25kA

40A

25kA

50A

25kA

63A

20kA

25kA

m.c.c.b. upstream

DPX / H / L 250

(Thermal-magnetic & electronic)

DPX / H / L 630

(Thermal-magnetic & electronic)

36 –70 –100kA

m.c.b. downstream

25A

40A

63A

100A

160A

250A

320A

400A

500A

630A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

25kA

25k

25kA

20A

25kA

25A

-

25kA

32A

-

25kA

40A

-

25kA

20kA

50A

-

25kA

16kA

63A

-

25kA

16kA

According to the curves and ratings of circuit breakers, attention to the magnetic (or electronic) threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

13/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and MCCBs, three-phase network (+ neutal) 400 / 415 V~ according to

IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected between

phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.c.b.. upstream

DPX / H / L 1250

(Thermal -magnetic)

DPX / H 1600

(electronic)

50 –70 –100kA

36 –70kA

m.c.b. downstream

500 to 1250A

630 to 1600A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

25kA

20A

25kA

25A

20kA

32A

15kA

40A

15kA

50A

12.5kA

63A

12.5kA

According to the curves and ratings of circuit breakers, attention to the magnetic (or electronic) threshold and to the size of upstream circuit

breakers which must necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

14/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and fuses, three-phase network (+ neutal) 230 / 240 V~ according to IEC/EN

60947-2:

Fuse upstream

gG Type

m.c.b. downstream

≤20A

25A

32A

40A

50A

63A

80A

100A

125A

160A

TX36000A

B, C & D Curves

<6A

100kA

40kA

6A

100kA

40kA

10A

100kA

40kA

13A

100kA

40kA

16A

-

100kA

40kA

20A

-

100kA

40kA

25A

-

100kA

40kA

32A

-

100kA

40kA

40A

-

100kA

40kA

50A

-

100kA

40kA

63A

-

100kA

40kA

Fuse upstream

aM Type

m.c.b. downstream

≤20A

25A

32A

40A

50A

63A

80A

100A

125A

160A

<6A

100kA

40kA

TX36000A

B, C & D Curves

6A

100kA

40kA

10A

100kA

40kA

13A

100kA

40kA

16A

-

100kA

40kA

20A

-

100kA

40kA

25A

-

100kA

40kA

32A

-

100kA

40kA

40A

-

100kA

40kA

50A

-

100kA

40kA

63A

-

100kA

40kA

According to the curves and ratings of circuit breakers, attention to the threshold and to the size of upstream fuses which must necessarily be

higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

15/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers, three-phase network (+ neutal) 230 / 240 V~ according to IEC/EN 60947-2:

m.c.b. upstream

DX36000A/10kA

B and C Curves

D Curve

m.c.b. downstream

≤25A

32A

40A

50A

63A

≤25A

32A

40A

50A

63A

TX36000A

B, C & D Curves

<6A

15kA

6A

15kA

10A

15kA

13A

15kA

16A

15kA

20A

15kA

25A

-

15kA

-

15kA

32A

-

15kA

-

15kA

40A

-

15kA

-

15kA

50A

-

15kA

-

15kA

63A

-

m.c.b. upstream

TX310000A

B Curve

C Curve

m.c.b. downstream

≤25A

32A

40A

50A

63A

≤25A

32A

40A

50A

63A

TX36000A

B, C & D Curves

<6A

15kA

6A

15kA

10A

15kA

13A

15kA

16A

15kA

20A

15kA

25A

-

15kA

-

15kA

32A

-

15kA

-

15kA

40A

-

15kA

-

15kA

50A

-

15kA

-

15kA

63A

-

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

16/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers, three-phase network (+ neutal) 230 / 240 V~ according to IEC/EN 60947-2:

m.c.b. upstream

DX310000/16kA

B and C Curves

B, C and D Curves

m.c.b. downstream

≤25A

32A

40A

50A

63A

80A

100A

125A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

25kA

20A

25kA

25A

-

25kA

32A

-

25kA

40A

-

25kA

50A

-

25kA

63A

-

25kA

m.c.b. upstream

DX325kA

B, C and D Curves

m.c.b. downstream

≤25A

32A

40A

50A

63A

80A

100A

125A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

25kA

20A

25kA

25A

-

25kA

32A

-

25kA

40A

-

25kA

50A

-

25kA

63A

-

25kA

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

17/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers, three-phase network (+ neutal) 230 / 240 V~ according to IEC/EN 60947-2:

m.c.b. upstream

DX336kA

DX350kA

C Curve

B, C and D Curves

m.c.b. downstream

≤25A

32A

40A

50A

63A

80A

≤25A

32A

40A

50A

63A

TX36000A

B, C & D Curves

<6A

36kA

50kA

6A

36kA

50kA

10A

36kA

50kA

13A

36kA

50kA

16A

36kA

50kA

20A

36kA

50kA

25A

-

36kA

-

50kA

32A

-

36kA

-

50kA

40A

-

36kA

-

50kA

50A

-

36kA

-

50kA

63A

-

36kA

-

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

18/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and MCCBs, three-phase network (+ neutal) 400 / 415 V~ according to

IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected between

phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.c.b. upstream

DPX 125

16kA

m.c.b. downstream

16A

25A

40A

63A

100A

125A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

-

25kA

20A

-

25kA

25A

-

25kA

32A

-

25kA

40A

-

25kA

50A

-

25kA

63A

-

25kA

m.c.c.b. upstream

DPX 125

25 –36kA

m.c.b. downstream

16A

25A

40A

63A

100A

125A

TX36000A

B, C & D Curves

<6A

40kA

6A

40kA

10A

40kA

13A

40kA

16A

-

40kA

20A

-

40kA

25A

-

40kA

32A

-

40kA

40A

-

40kA

50A

-

40kA

63A

-

40kA

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

19/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and MCCBs, three-phase network (+ neutal) 400 / 415 V~ according to

IEC/EN 60947-2:

For TT or TN neutral system in 230/400 V network, to know the breaking capacity of the combination of a double pole breaker (connected between

phase and neutral under 230 V) downstream of a triple-pole circuit-breaker, take the values shown in Tables 230/400 V.

m.c.c.b. upstream

DPX3160 / DPX3160 + RCD

16kA

m.c.b. downstream

16A

25A

40A

63A

80A

100A

125A

160A

TX36000A

B, C & D Curves

<6A

25kA

6A

25kA

10A

25kA

13A

25kA

16A

-

25kA

20A

-

25kA

25A

-

25kA

32A

-

25kA

40A

-

25kA

50A

-

25kA

63A

-

25kA

m.c.c.b. upstream

DPX3160 / DPX3160 + RCD

25 –36 –50kA

m.c.b. downstream

16A

25A

40A

63A

80A

100A

125A

160A

TX36000A

B, C & D Curves

<6A

40kA

6A

40kA

10A

40kA

13A

40kA

16A

-

40kA

20A

-

40kA

25A

-

40kA

32A

-

40kA

40A

-

40kA

50A

-

40kA

63A

-

40kA

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

20/49

Circuit breaker TX36000 A

up to 63 A (1 module per pole)

Cat. N° (s) : 4 033 49 to 4 035 68, 4 037 12 to 4 037 78

5. GENERAL CHARACTERISTICS

(continued):

Coordination between modular circuit-breakers and M.C.C.Bs (Moulded Case Circuit Breakers), three-phase network (+ neutal)

230 / 240 V~ according to IEC/EN 60947-2:

m.c.c.b. upstream

DPX 250ER

DPX3 250 / DPX3 250 +RCD

(Thermal-magnetic & electronic)

25 - 36 - 50kA

25 - 36 –50 - 70kA

m.c.b. downstream

100A

160A

250A

100A

160A

200A

250A

TX36000A

B, C & D Curves

<6A

40kA

6A

40kA

10A

40kA

13A

40kA

16A

40kA

20A

40kA

25A

40kA

32A

40kA

40A

40kA

50A

40kA

63A

40kA

m.c.c.b. upstream

DPX / H / L 250

(Thermal-magnetic & electronic)

DPX / H / L 630

(Thermal-magnetic & electronic)

36 –70 –100kA

m.c.b. downstream

25A

40A

63A

100A

160A

250A

320A

400A

500A

630A

TX36000A

B, C & D Curves

<6A

40kA

6A

40kA

10A

40kA

13A

40kA

16A

40kA

20A

40kA

25A

-

40kA

32A

-

40kA

40A

-

40kA

50A

-

40kA

25kA

63A

-

40kA

25kA

According to the curves and ratings of circuit breakers, attention to the magnetic threshold and to the size of upstream circuit breakers which must

necessarily be higher.

Technical data sheet: F01547EN/01

Updated: 15/10/2014

Created: 30/05/2014

LEGRAND TX3 6000 A User manual

Popular Circuit Breaker manuals by other brands