LEGRAND 0 648 88 User manual

Cat. No: 0 648 88
Technical data sheet: F02490EN/00 Updated: 22/07/2018 Created: 12/02/2018
1/2
Connected lighting micromodule
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel: [phone] - Fax: [phone]
www.legrand.com
5. OPERATION
6. TECHNICAL CHARACTERISTICS
6.1 Mechanical characteristics
Protection against impacts: IK 04
Protection against solid bodies/liquids: IP 20
6.2 Material characteristics
Polycarbonate
Self-extinguishing:
+ 850°C/30 s for insulating parts holding live parts in place.
+ 650°C/30 s for the other insulating components.
6.3 Electrical characteristics
ZigBee radio technology frequency 2.4 GHz to 2.4835 GHz
Power level: < 100 mW
Wireless mesh network, self-adaptive and secure (AES 128), conforming
to standard IEEE 802.15.4 (LR-WPAN)
5terminals: 1 auxiliary input
1 phase cut
1 phase
2 neutral
Consumption: - operation: 0.5 W
- standby: 0.2 W
Voltage: 100/240 V~
Frequency: 50/60 Hz
1. USE
Connected lighting micromodule switch.
Can be used to create a one-way switch, 2-way switch or remote switch
function without pulling wires.
If replacing an existing remote switch, the wired pushbutton control runs
can be retained.
Its receiver function allows it to be combined with 1-gang or 2-gang
radio control units (wireless transmitters), IR detectors.
For installation in a ceiling light, wall lighting strip or in a panel.
Can be combined with one or more wireless lighting controls.
3. DIMENSIONS (mm)
4. CONNECTION
Terminal type: screw
Terminal capacity: 2 x 1.5 mm
2
Stripping length: 6 mm
3 mm flat screwdriver
2. RANGE
Description Cat. No.
Connected micromodule with 1 ON/OFF circuit
Lighting micromodule switch up to 300 W.
Equipped with an LED indicator (conguration) and a RESET button (hidden)
used to return to factory settings.
0 648 88
A B C D Ø E
40 40 20 52 3
Ø E
A
D
BC
L
NN
ON
OFF RESET button used to return to factory settings
LED indicator:
- useful during installation for configuration
ON/OFF button

2/2
Cat. No: 0 648 88
Connected lighting micromodule
Technical data sheet: F02490EN/00 Updated: 22/07/2018 Created: 12/02/2018
6. TECHNICAL CHARACTERISTICS (continued)
6.3 Electrical characteristics (continued)
Table of loads
(*)
Or 10 lamps max. For comfortable lighting, we recommend using bulbs of the
same type and make.
(**)The ferromagnetic transformers must be charged to more than 60% of their
power. When calculating the permissible power, the ferromagnetic transformer
efficiency must be taken into account. A load must be connected before
programming and using the product.
6.4 Climate characteristics
Usage temperature: +5°C to +45°C
Storage temperature: 0°C to +45°C
7. CARE
Clean the surface with a cloth.
Do not use acetone, tar-removing cleaning agents or trichloroethylene.
8. STANDARDS AND APPROVALS
The undersigned, LEGRAND, declares that the radio-electric equipment
type (0 648 88) complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available on the
following website: www.legrandoc.com
Caution: Always test before using special cleaning products.
R L
LED **
240 V~ Max. 300 W (*)100 W 250 W 250 VA 250 VA
100 V~ Max. 150 W (*)50 W 125 W 125 VA 125 VA