Leica MojoMINI User manual

Demonstration Mode
Version 2.0
English

Leica mojoMINI – Demonstration Mode 2
1Enabling demonstration mode
General information Demonstration mode can be enabled on the mojoMINI to allow the product to operate
without external input from the GPS receiver.
Prerequisites ■SD Card & SD Card reader
■NMEA.in file (download from www.virtualwrench.com)
Field guidance demo
mode
step-by-step
1. Insert SD Card in Card Reader.
2. Copy the NMEA.in file to the root directory of the SD
Card.
3. Remove the SD Card from the Card Reader.

Leica mojoMINI – Demonstration Mode 3
4. Insert SD Card in mojoMINI.
5.
Turn mojoMINI on using the slide switch.
The SD Card must remain in the mojoMINI to
continue field guidance in demonstration
mode. Remove the SD Card and restart the
mojoMINI to return to normal field
operation.
6.
For the standard NMEA.IN file set the implement width to 25m and configure A+
heading guidance with a 0oheading.
Street navigation
demo mode
step-by-step
Demo mode for street navigation software is pre-installed. To start demo more tap:
The button bar will minimize after a short period of inactivity. To display the
button bar, tap in the bottom right–hand corner of the screen.

Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Switzerland
Phone: [phone]
www.leica-geosystems.com
Leica mojoMINI – Demonstration Mode
Original text
© 2011 Leica Geosystems AC, Heerbrugg, Switzerland