Leica Zeno 20 3.75G Android User manual

Leica Zeno 20 Windows
Embedded Handheld
User Manual
Version 1.2
English

Introduction
Congratulations on the purchase of the Leica Zeno 20 Windows Embedded
Handheld.
This manual contains important safety directions as well as instructions for set-
ting up the product and operating it. Refer to "1 Safety Directions" for further
information.
Read carefully through the User Manual before you switch on the product.
The model and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or
Leica Geosystems authorised service centre.
•Windows is a registered trademark of Microsoft Corporation in the United
States and other countries
•CompactFlash and CF are trademarks of SanDisk Corporation
•
Bluetooth
®is a registered trademark of Bluetooth SIG, Inc.
•SD Logo is a trademark of SD-3C, LLC.
All other trademarks are the property of their respective owners.
This manual applies to the Windows Embedded Handheld version of the
LeicaZeno 20 device.
Name Description/Format
Leica
Zeno 20
Quick Guide
Provides an overview of the product together with
technical data and safety directions. Intended as a
quick reference guide.
ü ü
LeicaZeno 20
User Manual
All instructions required in order to operate the
product to a basic level are contained in the User
Manual. Provides an overview of the product
together with technical data and safety direc-
tions.
-ü
Name Description/Format
ZenoGIS Get-
ting Started
Guide
Describes the general working of the product in
standard use. Intended as a quick reference field
guide.
-ü
Zeno Connect
Getting Star-
ted Guide
Describes the general working of the product in
standard use. Intended as a quick reference field
guide.
-ü
Zeno Mobile
Quick Guide
Describes the general working of the product in
standard use. Intended as a quick reference field
guide.
-ü
Purchase
Product identification
Trademarks
Validity of this man-
ual
Available documenta-
tion
2

Name Description/Format
ZenoGIS
Help*
Overall comprehensive help to the product and
application functions. Included are detailed
descriptions of special software/hardware settings
and software/hardware functions.
- -
* only available as Online Help
Refer to the following resources for all Zeno 20 documentation/soft-
ware:
•the Leica USB documentation card
•https://myworld.leica-geosystems.com
myWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers
a wide range of services, information and training material.
With direct access to myWorld, you are able to access all relevant services
whenever it is convenient for you.
Service Description
myProducts Add all products that you and your company own
and explore your world of Leica Geosystems: View
detailed information on your products and update
your products with the latest software and keep up-
to-date with the latest documentation.
myService View the current service status and full service his-
tory of your products in Leica Geosystems service
centres. Access detailed information on the services
performed and download your latest calibration cer-
tificates and service reports.
mySupport Create new support requests for your products that
will be answered by your local Leica Geosystems
Support Team. View the complete history of your
support requests and view detailed information on
each request in case you want to refer to previous
support requests.
myTraining Enhance your product knowledge with Leica Geosys-
tems Campus - Information, Knowledge, Training.
Study the latest online training material on your
products and register for seminars or courses in your
country.
myTrustedServices Add your subscriptions and manage users for
Leica Geosystems Trusted Services, the secure soft-
ware services, that assist you to optimise your work-
flow and increase your efficiency.
3

Table of Contents
1 Safety Directions 6
1.1 General Introduction 6
1.2 Definition of Use 6
1.3 Limits of Use 7
1.4 Responsibilities 8
1.5 Hazards of Use 8
1.6 Electromagnetic Compatibility EMC 11
1.7 FCC Statement, Applicable in U.S. 13
1.8 ICES-003 Statement, Applicable in Canada 14
2 Description of the System 16
2.1 Overview 16
2.2 System Concept 17
2.2.1 Software Concept 17
2.2.2 Power Concept 17
2.2.3 Data Storage Concept 18
2.3 System Components 18
2.4 Components 19
3 User Interface 21
3.1 Keyboard 21
3.2 Operating Principles 22
3.3 LED Indicators on Zeno 20 23
4 Operation 24
4.1 Equipment Setup 24
4.1.1 Fixing the Display Foil to the Zeno 20 24
4.1.2 Inserting and Removing a SIM Card and SD Card 24
4.1.3 Attaching the AS10/AS05 Antenna to the Zeno 20 26
4.2 Batteries 26
4.2.1 Operating Principles 27
4.2.2 Changing the Battery 27
4.2.3 Charging the Battery 28
4.3 Power Functions 29
4.4 Connecting the Zeno 20 to PC via Windows Mobile Device Center 30
4.5 Optimising the Zeno 20 for GNSS Tracking 31
4.6 Setting up the Zeno 20 with a Disto S910 31
5 Software 33
5.1 Today Screen 33
5.2 Hot Keys 35
5.3 Reinstalling the Operating System 35
5.4 Resetting the Zeno 20 Device 36
5.5 Radio Control 37
5.6 Establishing a Modem Connection 37
5.7 Establishing a WLAN Connection 37
5.8 GNSS Antenna Power Management 38
5.9 Customising the Start-Up Screen 38
6 Care and Transport 40
6.1 Transport 40
6.2 Storage 40
6.3 Cleaning and Drying 40
7 Technical Data 42
7.1 Zeno 20 42
4 Table of Contents

7.2 Conformity to National Regulations 44
7.3 Dangerous Goods Regulations 45
8 Software Licence Agreement 46
Table of Contents 5

1 Safety Directions
1.1 General Introduction
The following directions enable the person responsible for the product, and the
person who actually uses the equipment, to anticipate and avoid operational
hazards.
The person responsible for the product must ensure that all users understand
these directions and adhere to them.
Warning messages are an essential part of the safety concept of the instru-
ment. They appear wherever hazards or hazardous situations can occur.
Warning messages...
•make the user alert about direct and indirect hazards concerning the use
of the product.
•contain general rules of behaviour.
For the users‘ safety, all safety instructions and safety messages shall be
strictly observed and followed! Therefore, the manual must always be available
to all persons performing any tasks described here.
DANGER, WARNING, CAUTION and NOTICE are standardised signal words for
identifying levels of hazards and risks related to personal injury and property
damage. For your safety, it is important to read and fully understand the fol-
lowing table with the different signal words and their definitions! Supplemen-
tary safety information symbols may be placed within a warning message as
well as supplementary text.
Type Description
DANGER Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING Indicates a potentially hazardous situation or
an unintended use which, if not avoided,
could result in death or serious injury.
CAUTION Indicates a potentially hazardous situation or
an unintended use which, if not avoided,
may result in minor or moderate injury.
NOTICE
Indicates a potentially hazardous situation or
an unintended use which, if not avoided,
may result in appreciable material, financial
and environmental damage.
☞Important paragraphs which must be adhered
to in practice as they enable the product to
be used in a technically correct and efficient
manner.
1.2 Definition of Use
•Remote control of product.
•Data communication with external appliances.
Description
About warning
messages
Intended use
6 Safety Directions

•Use of the product without instruction.
•Use outside of the intended use and limits.
•Disabling safety systems.
•Removal of hazard notices.
•Opening the product using tools, for example screwdriver, unless this is
permitted for certain functions.
•Modification or conversion of the product.
•Use after misappropriation.
•Use of products with recognizable damages or defects.
•Use with accessories from other manufacturers without the prior explicit
approval of Leica Geosystems.
•Inadequate safeguards at the working site.
•Controlling of machines, moving objects or similar monitoring application
without additional control and safety installations.
•The Zeno 20 is essentially an enhanced PDA (personal digital assistant)
used in geospatial applications. This device is to be used for data logging
and data communication for industrial applications only and not for
domestic consumer applications.
•This device does not have held-to-ear voice operations.
•This device does not have body-worn accessories.
•This device is designed to be used only in the hand or in fixed installations
by mounting it on a pole or a vehicle. When the device is not mounted on
a pole or a vehicle, you may use it in handheld mode only and should keep
it away from your body (as described in "4.5 Optimising the Zeno 20 for
GNSS Tracking"). Do not place the device on your lap or any part of the
body.
1.3 Limits of Use
Suitable for use in an atmosphere appropriate for permanent human habita-
tion: not suitable for use in aggressive or explosive environments.
WARNING
Working in hazardous areas, or close to electrical installations or simi-
lar situations.
Life Risk.
Precautions:
▶Local safety authorities and safety experts must be contacted by the per-
son responsible for the product before working in such conditions.
The following advice is only valid for battery charger, power adapter and car
adapter.
Suitable for use in dry environments only and not under adverse conditions.
Reasonably
foreseeable misuse
Additional Advice
Environment
☞
Environment
Safety Directions 7

1.4 Responsibilities
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as
Leica Geosystems, is responsible for supplying the product, including the user
manual and original accessories, in a safe condition.
The person responsible for the product has the following duties:
•To understand the safety instructions on the product and the instructions
in the user manual.
•To ensure that it is used in accordance with the instructions.
•To be familiar with local regulations relating to safety and accident preven-
tion.
•To inform Leica Geosystems immediately if the product and the application
becomes unsafe.
•To ensure that the national laws, regulations and conditions for the opera-
tion of the product are respected.
1.5 Hazards of Use
DANGER
Risk of electrocution
Because of the risk of electrocution, it is dangerous to use poles, levelling
staffs and extensions in the vicinity of electrical installations such as power
cables or electrical railways.
Precautions:
▶Keep at a safe distance from electrical installations. If it is essential to
work in this environment, first contact the safety authorities responsible
for the electrical installations and follow their instructions.
WARNING
Distraction/loss of attention
During dynamic applications, for example stakeout procedures, there is a dan-
ger of accidents occurring if the user does not pay attention to the environ-
mental conditions around, for example obstacles, excavations or traffic.
Precautions:
▶The person responsible for the product must make all users fully aware of
the existing dangers.
Manufacturer of the
product
Person responsible
for the product
8 Safety Directions

WARNING
Inadequate securing of the working site.
This can lead to dangerous situations, for example in traffic, on building sites
and at industrial installations.
Precautions:
▶Always ensure that the working site is adequately secured.
▶Adhere to the regulations governing safety, accident prevention and road
traffic.
CAUTION
Not properly secured accessories.
If the accessories used with the product are not properly secured and the
product is subjected to mechanical shock, for example blows or falling, the
product may be damaged or people can sustain injury.
Precautions:
▶When setting up the product, make sure that the accessories are correctly
adapted, fitted, secured, and locked in position.
▶Avoid subjecting the product to mechanical stress.
WARNING
Lightning strike
If the product is used with accessories, for example masts, staffs, poles, you
may increase the risk of being struck by lightning.
Precautions:
▶Do not use the product in a thunderstorm.
CAUTION
Keeping the device too close to the human body during operation may pose a
health risk.
This device has been tested for typical operations near the human body, for
example handheld mode, with the device kept at 10 mm from the user’s body.
Precautions:
▶Use the device at least 10 mm apart from the human body.
Safety Directions 9

CAUTION
Inappropriate mechanical influences to batteries
During the transport, shipping or disposal of batteries it is possible for inappro-
priate mechanical influences to constitute a fire hazard.
Precautions:
▶Before shipping the product or disposing of it, discharge the batteries by
running the product until they are flat.
▶When transporting or shipping batteries, the person in charge of the prod-
uct must ensure that the applicable national and international rules and
regulations are observed.
▶Before transportation or shipping contact your local passenger or freight
transport company.
WARNING
Exposure of batteries to high mechanical stress, high ambient tempera-
tures or immersion into fluids
This can cause leakage, fire or explosion of the batteries.
Precautions:
▶Protect the batteries from mechanical influences and high ambient temper-
atures. Do not drop or immerse batteries into fluids.
WARNING
Short circuit of battery terminals
If battery terminals are short circuited e.g. by coming in contact with jewellery,
keys, metallised paper or other metals, the battery can overheat and cause
injury or fire, for example by storing or transporting in pockets.
Precautions:
▶Make sure that the battery terminals do not come into contact with metal-
lic objects.
WARNING
Improperly repaired equipment
Risk of injuries to users and equipment destruction due to lack of repair knowl-
edge.
Precautions:
▶Only Leica Geosystems authorised service centres are entitled to repair
these products.
The following advice is only valid for battery charger, power adapter and car
adapter.
☞
10 Safety Directions

WARNING
Unauthorised opening of the product
Either of the following actions may cause you to receive an electric shock:
•Touching live components
•Using the product after incorrect attempts were made to carry out repairs
Precautions:
▶Do not open the product!
▶Only Leica Geosystems authorised service centres are entitled to repair
these products.
The following advice is only valid for batteries, power adapter or docking sta-
tion.
WARNING
Improper disposal
If the product is improperly disposed of, the following can happen:
•If polymer parts are burnt, poisonous gases are produced which may
impair health.
•If batteries are damaged or are heated strongly, they can explode and
cause poisoning, burning, corrosion or environmental contamination.
•By disposing of the product irresponsibly you may enable unauthorised
persons to use it in contravention of the regulations, exposing themselves
and third parties to the risk of severe injury and rendering the environment
liable to contamination.
Precautions:
▶The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with
the national regulations in force in your country.
Always prevent access to the product by unauthorised
personnel.
Product-specific treatment and waste management information can be
received from your Leica Geosystems distributor.
1.6 Electromagnetic Compatibility EMC
The term Electromagnetic Compatibility is taken to mean the capability of the
product to function smoothly in an environment where electromagnetic radia-
tion and electrostatic discharges are present, and without causing electromag-
netic disturbances to other equipment.
WARNING
Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards which are in
force in this respect, Leica Geosystems cannot completely exclude the possibil-
ity that other equipment may be disturbed.
☞
Description
Safety Directions 11

The product is a class A product when operated with the internal batteries. In a
domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
CAUTION
Use of the product with accessories from other manufacturers. For
example field computers, personal computers or other electronic equip-
ment, non-standard cables or external batteries
This may cause disturbances in other equipment.
Precautions:
▶Use only the equipment and accessories recommended by Leica Geosys-
tems.
▶When combined with the product, they meet the strict requirements stipu-
lated by the guidelines and standards.
▶When using computers, two-way radios or other electronic equipment, pay
attention to the information about electromagnetic compatibility provided
by the manufacturer.
CAUTION
Intense electromagnetic radiation. For example, near radio transmit-
ters, transponders, two-way radios or diesel generators
Although the product meets the strict regulations and standards which are in
force in this respect, Leica Geosystems cannot completely exclude the possibil-
ity that function of the product may be disturbed in such an electromagnetic
environment.
Precautions:
▶Check the plausibility of results obtained under these conditions.
CAUTION
Electromagnetic radiation due to improper connection of cables
If the product is operated with connecting cables attached at only one of their
two ends, for example external supply cables, interface cables, the permitted
level of electromagnetic radiation may be exceeded and the correct functioning
of other products may be impaired.
Precautions:
▶While the product is in use, connecting cables, for example product to
external battery, product to computer, must be connected at both ends.
12 Safety Directions

WARNING
Use of product with radio or digital cellular phone devices
Electromagnetic fields can cause disturbances in other equipment, in installa-
tions, in medical devices, for example pacemakers or hearing aids and in air-
craft. It can also affect humans and animals.
Precautions:
▶Although the product meets the strict regulations and standards which are
in force in this respect, Leica Geosystems cannot completely exclude the
possibility that other equipment can be disturbed or that humans or ani-
mals can be affected.
▶Do not operate the product with radio or digital cellular phone devices in
the vicinity of filling stations or chemical installations, or in other areas
where an explosion hazard exists.
▶Do not operate the product with radio or digital cellular phone devices
near to medical equipment.
▶Do not operate the product with radio or digital cellular phone devices in
aircraft.
1.7 FCC Statement, Applicable in U.S.
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by Leica Geosystems for
compliance could void the user's authority to operate the equipment.
Safety Directions 13

FCC-ID:RFD-Z ENO20G
IC-ID:3177A-ZENO20G
D.No.: X XXXXXXXXX
LeicaGeosys temsAG
CH-9435Heerbrugg
Manufactured:20XX
S.No.:12 3456
Type: Zeno 20UMTS
Equip.No.: 123 4567
Art.No.:8XXXXX
Power: 5V / 1.8A
inChina
Made in China
FCC-ID: RFD-ZENO20G
IC: 3177A-ZENO2 0G
D.No.:XXXXXXXXXX
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 20XX
S.No.: 123456
Type: Zeno 20 UMTS
Equip. No.: 1234567
Art.No.:8XXXXX
Power: 5V / 1.8A
FCC-ID: RFD-ZENO20C
IC: 3177A-ZENO20C
D.No.:XXXXXXXXXX
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 20XX
S.No.:123456
Type: Zeno 20 CDMA
Equip.No.:1234567
Art.No.: 8XXXXX
Power: 5V / 1.8A
009333_003
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference
that may cause undesired operation.
1.8 ICES-003 Statement, Applicable in Canada
WARNING
This Class (B) digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe (B) est conforme à la norme NMB-003
du Canada.
Canada Compliance Statement
This device complies with Industry Canada’s license-exempt RSSs. Operation
is subject to the following two conditions:
1.This device may not cause interference; and
2.This device must accept any interference, including interference that
may cause undesired operation of the device.
Canada Déclaration de Conformité
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux con-
ditions suivantes:
1.l’appareil ne doit pas produire de brouillage;
2.l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The wireless device is a radio transmitter and receiver. It is designed and manu-
factured not to exceed the emission limit for exposure to radio frequency (RF)
energy set by the OET Bulletin 65 Supplement C / Ministry of Health (Canada),
Safety Code 6. These limits are part of comprehensive guidelines and estab-
lished permitted levels of RF energy for the general population. These guide-
lines are based on the safety standards previously set by international standard
bodies. These standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
This device and its antenna must not be co-located or operating in conjunction
Labelling Zeno 20
☞
Exposure to radio fre-
quency (RF) signals
14 Safety Directions

with any other antenna or transmitter.
This device has been shown to be capable of compliance for localised specific
absorption rate (SAR) for uncontrolled environment / general public exposure
limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance with
the measurement procedures specified in IEEE Std. 1528-2003.
This radio transmitter has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain and
required antenna impedance for each antenna type indicated. Antenna types
not included in this list, having a gain greater than the maximum gain indicated
for that type, are strictly prohibited for use with this device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p) is not more than that necessary for suc-
cessful communication.This device complies with Industry Canada license-
exempt RSS standard(s).
Operation is subject to the following two conditions:(1) This device may not
cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent émetteur radio a été approuvé par Industrie Canada pour fonction-
ner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal et l'impédance requise pour chaque type d'antenne. Les types d'ant-
enne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de l'émetteur.Conformé-
ment à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les ris-
ques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayon-
née équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établisse-
ment d'une communication satisfaisante.Le présent appareil est conforme aux
CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'ex-
ploitation est autorisée aux deux conditions suivantes :(1) Ll'appareil ne doit
pas produire de brouillage.
(2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC Canadian Compli-
ance
Safety Directions 15

2 Description of the System
2.1 Overview
The Zeno 20 is a compact, high performance, low weight device with an inte-
grated high accuracy GNSS, designed for outdoor & fieldwork usage. The
Zeno 20 can withstand severe environmental conditions including vibration,
shock, moisture and temperature variations. The Zeno 20 is suitable for use in
harsh environments such as construction sites, warehouses, military, manufac-
turing and field service.
009343_001
Model Zeno 20
3.75G
Android
Zeno 20
3.75G WEH
Zeno 20
CDMA
Android
Zeno 20
CDMA WEH
Touch screen üüüü
Colour dis-
play
üüüü
Internal
modem
W/WWAN-
GSM
W/WWAN-
GSM
W/WWAN-
CDMA
W/WWAN-
CDMA
Internal bat-
teries1)
üüüü
MicroSD Card üüüü
Bluetooth üüüü
Wireless LAN
802.11b/g/n
üüüü
Wi-Fi üüüü
Operating
System
Android 4.2.2 Windows
Embedded
Handheld 6.5
Professional
Android 4.2.2 Windows
Embedded
Handheld 6.5
Professional
L1/L2 GNSS
board
üüüü
FCC etc. (reports)
Model Name Zeno 20 Zeno 20 Zeno 20 Zeno 20
FCC ID RFD-
ZENO20G
RFD-
ZENO20G
RFD-
ZENO20C
RFD-
ZENO20C
CE and IC
Model Name ZENO20G ZENO20G ZENO20C ZENO20C
Zeno 20 General
Description
Zeno 20 Available
Models
1) One removable battery and one backup battery
16 Description of the System

Model Zeno 20
3.75G
Android
Zeno 20
3.75G WEH
Zeno 20
CDMA
Android
Zeno 20
CDMA WEH
IC Number 3177A-
ZENO20G
3177A-
ZENO20G
3177A-
ZENO20C
3177A-
ZENO20C
2.2 System Concept
2.2.1 Software Concept
Software type Description
Windows Embedded Hand-
held 6.5 Professional (WEH)
This software includes:
•The English version of WEH.
•The basic WEH functionality.
•If ordered, Zeno Field or Zeno Connect
for Zeno 20.
Android 4.2.2 This software includes:
•The language-specific version of Android.
•The basic Android functionality.
•If ordered, Zeno Mobile or Zeno Connect
for Zeno 20.
☞This User Manual only describes the Windows Embedded Handheld
version of the Zeno 20. For more information about the other version
refer to the respective User Manual.
☞The Zeno 20 is delivered with the operating system and software that
you ordered. The software is already licensed.
☞The installation includes the latest released Zeno updates, the latest
released GNSS board firmware and the purchased Auth Code. Refer to
the according software documentation for more information.
2.2.2 Power Concept
Use the batteries, chargers and accessories recommended by Leica Geosystems
to ensure the correct functionality of the instrument.
Model Power supply
Zeno 20 Internally by AZ2062) battery, OR
Externally by AZ2093) AC/DC adapter, OR
Externally by AZ208 car adapter.
If an external power supply is connected and the internal batter-
ies are inserted, then the external power is used. If the power
consumption of the Zeno 20 is less than the charging capacity,
the internal batteries are charged.
Software Options for
Zeno 20
General
Power Options
2) manufacturer: ETI CA Battery Inc.
3) manufacturer: Ktec
Description of the System 17

2.2.3 Data Storage Concept
Data is stored on a memory device. The memory device can be a USB stick, an
SD card or the internal memory.
USB stick: The device has a USB port fitted as standard.
Internal memory: The device has an internal memory fitted as stand-
ard. Available capacity: 4 GB.
MicroSDHC card: The device has an MicroSDHC card slot.
Maximum card size: 32 GB
☞The delivered Leica Geosystems USB flash drive contains system soft-
ware and is not certified for permanent data transfer i.e. as data stor-
age for measurement data. Use only certified industrial grade USB
flash drives such as the LeicaMS1 (order number 765199).
2.3 System Components
The Zeno 20 package includes the following components:
009342_001
a Zeno 20
b AZ206
c AZ201
d AZ203
e AZ211
f AZ209
g
h
a)Zeno 20 Android
OR
Zeno 20 Windows Embedded Handheld
b)Rechargeable Battery
c)Capacitive Stylus
d)Hand Strap
e)Data Transfer Cable
f)AC Adapter
g)Quick Guide
h)USB documentation card with software and documents
Description
Memory Device
Zeno 20 Package
18 Description of the System

•16 GB MicroSD card (823058)
•Car Charger (823056)
•Desktop Charger (823055)
•Additional Battery (823054)
•Zeno 20 Pole Plate (823052)
•Zeno 20 Pole Plate and Disto S910 Pole Plate (823053)
•Additional Stylus (823049)
•Disto FTA360 Adapter for Zeno 20 (827546)
•Screen Protection Foil for Zeno 20 (823050)
•AS10 Antenna Cable (667200)
•AS10 (827546)
2.4 Components
009316_001
a
d
c
b
e
f
a Internal GNSS Antenna and
Board
b External GNSS Antenna Con-
nector
c Screen
d Keypad
e LED Indicators
f Microphone
009317_001
a
d
c
be
f
a Holder for Handstrap
b Camera and Flash
c Speaker
d Compartment with Slots for
Battery, SIM Card and
SD Card
e Release Lever for Battery
Compartment
f Handstrap Fixation
009318_001
ab
a USB A Host Port
bMicro USB Host Port, works
also as Power Socket
Optional Accessories
Front Side of the
Zeno 20
Back Side of the
Zeno 20
Bottom Panel of the
Zeno 20
Description of the System 19

009319_001
a
d
c
b
a Battery Connectors
bSIM Card Slot
c MicroSDHC Card Slot
d Latch for Battery Pack
Battery Compartment
20 Description of the System