Leviton Decora Smart DW4BC User manual

4-BUTTON CONTROLLER
Getting Started Guide
Cat. No. DW4BC
WEB VERSION

2
WEB VERSION

3
See the complete line of My Leviton app compatible
dimmers, switches, plug-ins, and controllers at
leviton.com/decorasmart.
Welcome to the
My LevitonTM Family
WEB VERSION

4
CALL
1-800-824-3005 (USA)
1-800-405-5320 (Canada)
ONLINE
leviton.com/decorasmart
CHAT
www.leviton.com
EMAIL
[e-mail]
Welcome
The Decora Smart Wi-Fi 4 Button
Controller provides sophisticated
in-wall control of multiple Decora
Smart Wi-Fi devices, room lighting
scenes and whole house lighting
activities. Using the My Leviton
app, easily create "Movie Time", or
activities such as "Go to Bed" and
run them using your voice, app, or
controller buttons. The custom
lighting scenes can include any
product from the Decora Smart
Wi-Fi family including dimmers,
switches and smart plugs.
We are here to help
WEB VERSION

5
RATINGS
Power 120VAC, 50/60Hz
Operating Temp 0°C - 40°C (32°F - 104°F)
Operating Humidity 0-90% non-condensing
What you need to make it work

To install and use your 4-button controller:
LINE
GROUND
NEUTRAL
1. A home Wi-Fi network with high speed
internet connection (802.11 a/b/g/n @ 2.4 or
5 GHz and WPA or WPA2).
2. An iOS (11.0 or later) or Android (6.0 or later)
mobile device.
3. An available interior wallbox with a hot,
neutral and ground wire. NOTE: No lighting
loads may be directly wired to your 4 Button
Controller. WARNING: Do not use with
aluminum wire.
4. One or more Decora Smart Wi-Fi products
(i.e., dimmer, switch or plug-in) with firmware
version 1.5 or higher. NOTE: Use the My
Leviton app to update firmware.
WEB VERSION

6
Features
Command buttons
Configure the buttons via the
My Leviton app to create room
scenes and whole house
lighting activities.
Vanishing feedback light
Each button has a feedback
light that illuminates with
every button press. After the
command is sent, the button will
no longer be lit.
WEB VERSION

7
The DW4BC is designed for new installation or to be retrofitted
by a licensed electrical contractor. A hot, neutral, and ground is
required for proper installation. The DW4BC is designed to send
scene commands to Decora Smart Wi-Fi products; a load is not
directly connected to the DW4BC.
For additional support use the support options in the My Leviton
app or contact technical services (page 4).
NOTE: Before you wire, check to make sure a strong Wi-Fi
signal is present at the location where you want to install your
controller.
WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn o power
at the circuit breaker.
1. Work on only one connection at a time.
2. Connect wires as shown.
NOTE: Neutral connection is required.
Installation
LINE
GROUND
NEUTRAL
WEB VERSION

8
Test and install
1. Restore power. Status light should flash green indicating
your controller is ready to be added to a network.
LINE
GROUND
NEUTRAL
WEB VERSION

9
Turn o power at circuit breaker before
completing the controller installation.
2. Gently push wires
into wall box.
Screw controller
to box.
3. Install wallplate base and
snap on Decora®wallplate.
Restore power.
Congratulations!
Your Decora Smart 4 button controller is ready to control
your Decora Smart Wi-Fi switches and dimmers.
WEB VERSION

10
Get the app
Visit http://my.leviton.com and select the link
for your smartphone or tablet.
WEB VERSION