Life Fitness Strength 8501 VKR OPTION User manual

1
8501 VKR OPTION
CLASS - S
PART # 7095301
REV. C Revision: 09/11/01
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 8501107

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
NOTE: In a continual effort to improve our products, specifications are subject to change
2001 LifeFitness, a division of Brunswick Corporation. All rights reserved.
www.LifeFitness.com
2
Parts list..........................4
Assembly Instructions.....4-7
General Maintenance.......8
©

IMPORTANT NOTES
Please note:
Tools Required forAssembly
* Thank you for purchasing the LifeFitness 8501 VKR OPTION. Please read these
instructions thoroughly and keep them for future reference.
3
NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
* 3/4” wrench, 9/16” wrench
* Ratchet with 3/4”, 9/16” socket
* 7/32”Allen wrench
* Tape measure

4
FIGURE 1
• Insert two 2” SQ. END CAPS (5) into the ends of the VKR FRAME (1) as shown in FIGURE 1.
STEP1:
PARTS LIST
PART #
6625608
6625708
6625802
6177001
6405201
3103101
3102501
KEY
1
2
3
4
5
6
7
QTY
1
1
1
1
4
4
10
PART #
3102502
3102802
3102801
3102904
3102917
6794204
6793904
DESCRIPTION
1/2” WASHER
3/8” LOCK NUT
1/2” LOCK NUT
3/8 X 3” BOLT
1/2 X 4” BOLT
BACK PAD
ARM PAD
QTY
6
2
6
8
6
1
2
DESCRIPTION
VKR FRAME
VKR FRAME SUPPORT
VKR FOOT STEP
NON-SKID STRIP
2” SQ. END CAP
1-1/4 X 5” GRIP
3/8” WASHER
KEY
8
9
10
11
12
13
14
• Insert two 2” SQ. END CAPS (5) into the ends of the VKR FOOT STEP (3) and apply one NON-SKID STRIP (4) as shown in
FIGURE 1.
• Slide four 1-1/4 X 5” GRIPS (6) onto the handles of the VKR FRAME (1). See FIGURE 1.
3
5
6
1
5 4

5
FIGURE2
• SECURELY assemble two ARM PADS (14) to the VKR FRAME (1) using four 3/8 X 3” BOLTS (11) and four 3/8” WASHERS (7)
as shown in FIGURE 2.
STEP2:
FIGURE 3
• SECURELY assemble the BACK PAD (13) to the VKR FRAME SUPPORT (2) using two 3/8 X 3” BOLTS (11) and two 3/8”
WASHERS (7) as shown in FIGURE 3.
STEP 3:
3/8 X 3” 11
11 3/8 X 3”
13
7
2
1 7
14

6
FIGURE 4
• LOOSELYassemble the VKR FRAME SUPPORT (2) to the VKR FRAME (1) using two 3/8 X 3” BOLTS (11), four 3/8” WASHERS
(7), and two 3/8” LOCK NUTS (9) as shown in FIGURE 4.
STEP 4:
FIGURE 5
• SECURELYassemble the VKR FRAME
(1) and VKR FRAME SUPPORT (2) to
the 8500 REAR UPRIGHT using four 1/
2 X 4” BOLTS (12), four 1/2”
WASHERS (8), and four 1/2” LOCK
NUTS (10). See FIGURE 5.
11 3/8 X 3”
7
1
2
7
9
STEP 5:
REAR UPRIGHT
12 1/2 X 4”
8 10
• SECURELY tighten the VKR FRAME
(1) and VKR FRAME SUPPORT (2)
connection.
TIGHTEN!

Thank you for purchasing the LifeFitness 8501 VKR OPTION. If unsure of proper use of equipment, call
your local LifeFitness distributor or call the LifeFitness customer service department at [phone].
7
FIGURE 6
• SECURELY assemble the VKR FOOT STEP (3) to the 8500 REAR UPRIGHT using two 1/2 X 4” BOLTS (12), two 1/2
WASHERS (8), and two 1/2” LOCK NUTS (10). See FIGURE 6.
STEP 6:
1/2 X 4” 12
10
8
REAR UPRIGHT
3

MAINTENANCE
MODEL #________________________
SERIAL #_________________________
DATE OF PURCHASE: _____________
DEALERS NAME: _________________
DEALERS PHONE #_______________
8
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your LifeFitness customer service representative
at [phone].
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury
Thank you for purchasing the LifeFitness 8501 VKR OPTION.
Please note:
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICEYOU WILLBEASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUTYOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.