Life Fitness Bench Support Kit 64727 User manual

905101 (805/874) BENCHSUPPORTKIT INSTRUCTIONS
RIGHT PAD SUPPORT
BACK PAD
_2,FT PAD SUPPORT
PIN
01/04/95 6,1.990

905101 (805/874) BENCHSUPPORTKIT INSTRUCTIONS
NOTE IF YOUARE ASSEMBLINGYOURBENCHFOR THE FIRST TIME PLEASE DISREGARDTHIS
STEP. Disassemble The BACKPADfrom the SLIDEMOUNTand the HINGETABS. Discard the two HINGE
TABS. (THE HARDWAREWILL BE USED AGAIN, DO NOT DISCARD)
Slide the LEFTANDRIGHTPADSUPPORTSonto the PIN as shown on drawing.
Loosely assemble the BACKPADto the bolt hole near the hinge of the LEFTand RIGHTPADSUPPORTS
using two(2) 3/8 x I-1/4 IN. BOLTS,two (2) 3/8 IN. LOCKWASHERS,and two (2) 3/8 IN. WASHERS.
Loosely assemble the SLIDEMOUNTto the bolt holes near the end of the LEFTand RIGHTPADSUPPORTS
using two(2) 3/8 x I-I/4 IN. BOLTS,two (2) 3/8 IN. LOCKWASHERS,and two (2) 3/8 IN. WASHERS.
SECURELYtighten all bolts. NOTE:If any other holes on your BACKPADand PADSUPPORTSmatch you
mayinstall additional bolts if youwish.
01/04/95 64990