Life Fitness G2 User manual

1
LEG PRESS ADAPTER KIT
FOR G2 GYM SYSTEM
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to ensure proper
assembly of this product.
Version: G2-GLPA-101
Revision: 07/17/08

2
TABLE OF CONTENTS
Safety Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Tools Required for Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Insert-Registration Card
IMPORTANT SAFELY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK,FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions on the use of this machine. Use only for
intended exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a
broken or jammed machine. Notify your authorized Life Fitness dealer and have repairs made by
an authorized service technician before use.
5. Be certain that the weight pin is inserted completely. Use only the pin provided by the
manufacturer. If unsure, call your authorized Life Fitness dealer.
6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found
in this condition. DO NOT attempt to fix. Notify your authorized Life Fitness dealer.
7. Inspect cables and their connections before using machine. Pay particular attention to the cable
ends. DO NOT attempt to fix any problems. Notify your authorized Life Fitness dealer and have
repairs made by an authorized service technician before use.
8. Make sure all spring-loaded pull pins are fully engaged in the adjustment position and fully tighten
the thumbscrew before use.
9. Children must not be allowed near this machine. Supervise teenagers.
Note: In our continuing effort to improve our products, specifications are subject to change.
©2006 Life Fitness, a division of Brunswick Corporation. All rights reserved.
www.lifefitness.com
2

3
IMPORTANT NOTES
Thank you for purchasing the Life Fitness G2 Leg Press Adapter Kit. Please read these
instructions thoroughly and keep them for future reference.
This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
TOOLS REQUIRED FOR ASSEMBLY
•9/16” wrench
•Rachet 9/16” socket
•Adjustable wrench
•Tape measure.
BOLT LENGTH RULER
Note: Bolt length is measured from the underside of the head of the bolt.
3
BOLT LENGTH

4
4
PARTS LIST
Note: The LEG PRESS ATTACHMENT (GLP) must be assembled before connecting it to the
LifeFitness G2 GYM SYSTEMS
STEP 1:
•Remove the bolts attaching the FRAME BRACE and CABLE to the BASE as shown in FIGURE 1
•Remove and discard the LEG CABLE by removing the bolts shown in FIGURE 1.
QTY
1
1
7
1
9
14
3
DESCRIPTION
3/8 X 2-3/4” BOLT
3/8 X 4” BOLT
3/8 X 4-3/4” BOLT
STEPSPACER 19/32” LG
STEPSPACER 1-19/32” LG
STEPSPACER 1-11/16” LG
CABLE L CLIP
QTY
4
2
5
4
4
2
1
DESCRIPTION
FRONT LEG
LEGPRESS CABLE
3-1/2” PULLEY
2” COVER CAP
3/8” WASHER
3/8” LOCKNUT
3/8 X 1-3/4” BOLT
KEY
8
9
10
11
12
13
14
KEY
1
2
3
4
5
6
7
DISCARD!
CABLE
FIGURE 1

5
5
STEP 2:
•If not already installed, slide one 2” COVER CAP(4) over the FRONTLEG (1) as shown in
FIGURE 8
•SECURELY assemble the FRONTLEG (1) to the G2 Gym System using two 3/8 X 4” BOLTS (9),
four 3/8” WASHERS (5), two LOW HEIGHT3/8” LOCK NUTS (6) as shown in FIGURE 2.
9 3/8 X 4”
6
5
1
4
FIGURE 2
0123 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2

6
6
2
STEP 3:
• Assemble the new LEG PRESS CABLE (2) using the previously removed bolts as shown in FIGURE 3.
Note: Make sure the LEG PRESS CABLE is running in the grooves of all pulleys and above the retaining bolts.
FIGURE 3

7
7
STEP 4:
•SECURELY assemble one 3-1/2” PULLEY (3) to the FRONT LEG (1) using one 3/8 X 1-3/4” BOLT (7) and one
3/8” LOCK NUT (6). See FIGURE 4.
1
6
3
2
7 3/8 X 1-3/4”
FIGURE 4
012345
6
1/2 1/2 1/2 1/2 1/2 1/2

8
8
STEP 5:
•SECURELY attach the GLP LEG PRESS to the FRONT LEG (1) using two 3/8” X 2-3/4”
BOLTS(8), two 3/8” WASHERS (5), and two 3/8” LOCK NUTS (6). See FIGURE 5.
STEP 6:
•Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY
assemble the 3-1/2” PULLEY (3) to the BRACKET (from 100 LEG PRESS kit) using one
3/8 X 1-3/4” BOLT (7), one 3/8” WASHER (5), one CABLE CLIP (14) and one 3/8” LOCK NUT (6)
as shown in FIGURE 6. Make sure the CABLE is in the grooves of all the pulleys.
1
6
5
8 3/8 X 2-3/4”
FIGURE 5
SEAT FRAME
6
5
2
3
7 3/8 X 1-3/4”
14
BRACKET
FIGURE 6

9
9
6
SEAT FRAME
BRACKET
5
10
3/8 LOCK NUT
3/8 X 4-3/4” FIGURE 7
STEP 7:
•SECURELY attach the BRACKET (from GLP LEG PRESS) to the SEAT FRAME using two
3/8” X 4-3/4” BOLTS (10), two 3/8” WASHERS (5), and two 3/8” LOCK NUTS (6). See FIGURE 7.
STEP 8:
•Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY
assemble the 3-1/2” PULLEY (3) to the bracket on the SEAT FRAME using one 3/8 X 1-3/4”
0123 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
3/8 X 1-3/4” 7
3
2
6
SEAT FRAME
FIGURE 8

10
10
STEP 9:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY
assemble the 3-1/2” PULLEY (3) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two
STEP SPACERS 1-19/32” (12) and one 3/8” LOCK NUT (6) as shown in FIGURE 9. Make sure
the CABLE is in the grooves of all the pulleys.
STEP 10:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the
3-1/2” PULLEY (3) to the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two STEP SPACERS 19/32” (11) and
one 3/8” LOCK NUT (6) as shown in FIGURE 10. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 4-3/4” 10
3
2
6
12
3/8 LOCK NUT
SEAT FRAME
MAIN ARM
3/8 X 2-3/4” 8
3
2
6
11
FIGURE 9
FIGURE 10

11
11
STEP 11:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY
assemble the 3-1/2” PULLEY (3) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two
STEP SPACERS 1-19/32” (12), and one 3/8” LOCK NUT (6) as shown in FIGURE 11. Make sure
the CABLE is in the grooves of all the pulleys.
STEP 11:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY
assemble the 3-1/2” PULLEY (3) to the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two STEP
SPACERS 19/32” (11) and one 3/8” LOCK NUT (6) as shown in FIGURE 12. Make sure the
CABLE is in the grooves of all the pulleys.
012345
6
1/2 1/2 1/2 1/2 1/2 1/2
3/8 X 4-3/4” 10
3
2
6
12
3/8” LOCK NUT
SEAT FRAME
3/8 X 2-3/4” 8
3
2
6
11
MAIN ARM
FIGURE 11
FIGURE 12

12
12
STEP 13:
•SECURELY assemble the swivel end of the LEG PRESS CABLE (2) to the SEAT FRAME using
one 3/8 X 4-3/4” BOLT (10), two STEP SPACERS 1-11/16” (13) and one 3/8” LOCK NUT (6).
Note: SECURELY tighten, then back nut off 1/4 turn
3/8 X 4-3/4” 10
2
6
13
SEAT FRAME
3/8 LOCK NUT
FIGURE 13
CABLE ROUTING DIAGRAM

13
13
ADJUST!
ADJUST!
FIGURE 14
STEP 11:
•Before setting the correct amount of tension in the cables, push the HEAD PLATE down, insert
the WEIGHT SELECTOR PIN, and perform several repetitions at the leg press station. This will
relax the cable system and prevent the HEAD PLATE from lifting up.
THANK YOU FOR PURCHASING THE LIFE FITNESS
LEG PRESS ADAPTER KIT FOR G2!

14

15