Life Gear 20163 User manual

Basic Magnetic Upright Bike
OWNER SMANUAL
Model#20161/20163/20166/20168/20169
The specificationsofthisproduct mayvary
fromthisphoto, subject tochange without notice.

1
Table of Contents
2 Precautions / Operating
Instruction
4 PartsList
5 Overview Drawing / Hardware
Packing List
6 AssemblyInstructions
8 Maintenance and Treatment
9 Warm UpExercises

2
1. Precautions
1)Thismagneticupright bikeisahomestationaryfitness equipment, and alsoan aerobic
training equipment that can helpyou todevelop yourcardio-vascularfunction.
2)The equipment shouldbe placed on the flat ground when using.
3)You can usethe equipment afteryou checked all bolts, pinsand otherpartsarewell
assembled and locked.
4)The minimuminsertdepthmarklinecouldnotbeleftoutsideoftheseatpostsupportwhen
adjusting the height of the seat post.
5)Pleasewearproperclothesand shoeswhen using thismagneticuprightbike;do notwear
clothesthat might catchanypart of the equipment; remembertotighten the pedaling straps.
6)Keep the children awayfromthe equipment whileusing the equipment. The minimumfree
spacerequired forsafeoperation isnot less than twometers.
7)Consult yourphysician and makeasuitableschedulebeforeexercise.
8)If feelingchestpain,nausea,dizziness,orshortofbreath,stopexercisingimmediatelyand
consult yourphysician beforenext exercise.
9)Maximumuser scapacityis100kgs.
10)The braking systemof the equipment isspeed-independent.
Warning:Itwill beharmful ifyoudisobeytheabove-mentionedprecautions.
2. Operating Instruction
1. Operateaccording toyourowncondition.
2.Adjustment of the tension control:Turnthe tension controlclockwise, the resistancewill be
strengthened.
3.Adjustment of the seat cushion: Removethe round knob and adjust the height of seat cushion
on yoursuitableposition and tighten the round knob afteradjustment.
4. Sitting pose: sit on the seat cushion when exercising, pleasetighten the pedaling strapsand
holdthe handlebarwithhands, adjust yourpostureaccording toyourexercisespeed and
intensity.
Operating ofthecomputer
FUNCTIONSAND OPERATIONS:(Formodelsof20163, 20166, 20168 and20169)
AUTO ON/OFF: The monitorwill be automaticallyshut off if thereisno signal
receivesinfor5minutes.The monitorwill be auto-powered when starting
exerciseorpressing the button.
SCANPress the button untilSCANappearsatSCANposition,monitorwill
scan the following functions: time, speed, distance, pulse, and
caloriesinevery4seconds.

3
TMR Count exercisetimefromstart toend.
SPDDisplaythe current speed.
DST Count the distancefromexercisestart toend.
CALCount the totalcaloriesfromexercisestart toend.
PULSE: Holdpulsesensorswithhandsand the screen willdisplayyourcurrentheartbeatratein
beatsperminute(BPM)after4-5seconds.“ ”meansthe pulsesignalinput.
(Thereisno PULSE function formodelsof 20163 and 20166)
ZERO CLEARINGButton being pressed over4seconds, all valuesreturntozero.
REPLACING THEBATTERY:
Open the batterycoverand placetwo"AA"or"UM-3" batterieswhen the screen cannotshow
clearly.
Note: The computerdisplaycan recover15 secondslaterafterthe batteriesreplacement.
Memorydatawill all disappearafterreplaced batteries.
FUNCTIONSAND OPERATIONS:(Formodel of20161)
AUTOON/OFF: When you starttoexerciseorpress the buttonon the
computer,the monitorwillturnon.If you leavethe equipmentfor5
minutes, the powerwill turnoff automatically.
SCAN: Press thebuttonuntil SCANappearsatSCANposition,
monitorwill scanthe following functions:time,speed,distance,and
caloriesevery4seconds.
TMR: Count exercisetimefromstart toend.
SPD: Displaycurrent speed.
DST: Count the distancefromexercisestart toend.
CAL: Count the totalcaloriesfromexercisestart toend.
ZERO CLEARING: Button being pressed over4seconds, all datareturnstozero.
REPLACINGTHEBATTERY: Open the batterycoverand placetwo"AA"or"UM-3"batteries
when the screen cannot showclearly.
Note: The computerdisplaycan recover15 secondslaterafterthe batteryreplacement.
Memorydatawill all disappearafterreplacing the batteries.

4
3. PartsList
No. Description Qty No. Description Qty
1Mainframe 1 32 Wireclamp 1
2Handlebarsupport 1 33 Buffercushion 1
3Handlebar1 34 Wireclampbracket 1
4Computer 1 35 Pressing bracket spring 1
5Flywheelaxis1 36 Pressing bracket 1
6Seat cushion 1 37 Magneticguiderspring 1
7Seat post 1 38 Magneticguider 1
8Bushing 1 39 Left cover 1
9Round knob 1 40 Coverlocalizer 2
10 Pedal(left &right 2 41 M8×55 Bolt4
11Front stabilizer 1 42 M8×20Bolt6
12 Ф8Flat washer 6 43 Crosshead self screwST5×16 1
13 Ф10 Flat washer 4 44 Crosshead self screwST4×20 6
14 Computerwire 1 45 M8×40 Bolt 1
15 Tension controlwire 1 46 Crosshead self screwST4X16 1
16 Front basefoot 2 47 Crosshead screwM5X16 1
17 Rearstabilizer 1 48 M8Cap nut 4
18 Rearbasefoot 2 49 M8Nylon nut 5
19 Belt wheel 1 50 M10X1X5Nut 3
20 Crank 1 51 M10X1X3Nut 3
21 Bearing set 1set 52 M12 Nut 1
22 4VBelt 1 53 M6Nut 2
23 Right cover 1 54 Arcwasher 10
24 Tension control 1 55 Press belt wheel 1
25 Ф6Flat washer 1 56 Crosshead self screwST3X8 2
26 Spring washer 2 57 Round end cap 2
27 Foamgrip 2 58 Hand pulsewire 2
28 Flywheel 1 59 Pulsesensor 2
29 Spacer 1 60 Screwdriver 1
30 Magneticbracket 1 61 Wrench 1
31 Pin 1
Note: The partsof#58 Hand pulsewireand#59 Pulsesensorarenotincluded formodelsof
20161, 20163, and 20166.