Logitech Elite 85T Assembly Instructions

LOGITECH ZONE TRUE WIRELESS
Complete Setup Guide |
完整設定指南| 설치 가이드 |
Panduan Pemasangan Lengkap

CONTENTS
English . . . . . . . . . . . . . . . . .3
繁體中文. . . . . . . . . . . . . . . 13
한국어 . . . . . . . . . . . . . . . . 23
Indonesia . . . . . . . . . . . . . . .33

KNOW YOUR PRODUCT
Bluetooth® pairing
button
Qi-wireless charging
Case light indicator
USB-C port for charging
cable
Wind defense
fabric
Control button
Noise-canceling mics
Replaceable eargels
Light indicator
USB-C adapter
USB-A receiver
3English

USB-A USB-C USB-A | USB-C
S
M M
S LL
USB-A
USB-C
WHAT’S IN THE BOX
1. Left & right ear buds
2. Replaceable eargels (total of 3 pairs):
— Small left & right eargels without ear ns
— Medium left & right eargels with ear ns
(premountedon the earbuds)
— Large left & right eargels with ear ns
3. Cloth travel bag
4. Wireless charging case
5. User documentation
6. USB-A receiver
7. USB-C to A adapter
8. USB-C to A charging cable (0.79 ft)
CHARGING
Charging via USB cable
1. Place the earbuds in the charging case andclose
the lid.
2. Plug the USB-C cable end into the USB-C port
onthe front of the charging case.
3. Plug the USB-A end into the USB-A charging port
on your computer or plug the USB-A end into
theUSB-C adapter and plug theUSB-C adapter
into the USB-C port on yourcomputer.
4. Case light Indicator will be a pulsing, whitelight
forcharging.
5. Case light Indicator will be solid white when
fullycharged.
— 2.5 hrs for full earbuds charge
— 2.5 hrs for full case charge
— 5 mins quick charge provides up to 1 hr talk time
orlistening time*
* Battery life was measured from fully charged to automatic shut o,
utilizing 50% volume for both talk time and listening time with in-ear
detection o.
Charging via Qi wireless charger
1. Place the charging case on top of any Qi-certied
wireless charging pad (min.5watts).*
2. Case indicator light will be a pulsing, whitelight
when charging.
3. Case Indicator light will be solid white shortly
whenfully charged.
* Qi wireless charging base is not included.
4English

ZONE
TRUE
WIRELESS
3 sec.
USB-A
USB-C
HOW TO SETUP YOUR DEVICE
1. Remove the earbuds from the charging case.
2. Insert the earbuds into your ears.
PAIR TO SMARTPHONE VIA BLUETOOTH®
1. Press the Bluetooth®pairing button in thecharging
case for 3 seconds. Case light indicator in the middle
will blink in white rapidly.
2. Open Bluetooth®settings on your device.
3. Select Zone True Wireless in discoverable devices.
PAIR TO COMPUTER VIA USB RECEIVER
1. USB-A
Insert the USB-A receiver into the computer
USB-A port.
USB-C
Insert the USB-A receiver into the USB-C adapter.
Theninsert the adapter into thecomputer USB-C port.
2. Earbuds are pre-paired to the receiver included
inthebox. Once successfully paired, the light indicator
on the receiver will remain solid.
5English

S
S
M
S
M
L
FIND YOUR PERFECT FIT
For optimized performance of ANC and comfort ,
selectamong the three eargel sizes (S, M, L) to nd
theones that best t your ears. Earbuds ship with
medium eargels.
1. Place the earbuds rmly within your ears.
Adjustangleand depth of the earbuds for the best
seal and comfort.
2. Size down if you feel too much pressure on yourear,
orsize up if the earbuds are too loose.
— Note: It is common to use dierent sized eargels
fordierent sides of your ears.
3. Fit Trial
— The earbuds should remain secured and tight
evenafter shaking your head in all directions.
— Play the same music as a fair comparison
ofnoiseisolation.
Left Right
OR
OR
6English

S
L
M
REPLACE THE EARGEL
1. Hold the body of the earbud with one hand.
2. With the other hand, gently pull the whole eargel
away from the body of the earbud.
3. Grab alternative sized eargels.
4. Gently stretch the eargel onto the earbud,
untilthereis no gap between eargel and body
oftheearbud.
7English

CALL AND MUSIC CONTROLS
Note:
- Teams activities are only functional when Teams is running on an unlocked computer.
- Media control and voice assistant functionality depend on device models and platforms.
- Call activities are always the rst priority. When two Bluetooth®devices are connected, the last active device
will override the other.
Tip: Button customizations and Music EQ controls available in Logi Tune.
For UC: Incoming call situations Active call situations Non-call situations
Action Left earbud Right earbud Left earbud Right earbud Left earbud Right earbud
Short press
Answer call Mute on / o End call Play / Pause 
2 seconds press Reject call   Next song Invoke voice
assistant
Double taps / press
ANC / Transparency Toggle ANC / Transparency Toggle ANC / Transparency Toggle
For Microsoft
Teams: Incoming call situations Active call situations Non-call situations
Action Left earbud Right earbud Left earbud Right earbud Left earbud Right earbud
Short press
Answer call Mute on / o End call Play / Pause Invoke Teams
2 seconds press Reject call   Next song Invoke voice
assistant
Double taps / press
ANC / Transparency Toggle ANC / Transparency Toggle ANC / Transparency Toggle
8English

ACTIVE NOISE CANCELLATION (ANC)
ANC blocks out the noise around you to help you
concentrate on the task at hand.
1. Double tap/press the left/right earbud under
non-call situations to switch between ANC
andTransparency mode.
2. There will be a voice prompt when turning ANC
orTransparency mode on.
3. You can also switch between ANC and Transparency
mode via Logi Tune.
— Note: Turn ANC o via Logi Tune if needed.
2x
L/R
ANC
For UC:
Light Status
White Flashing Incoming call
Solid Active call
Red Solid Mute on
For Microsoft Teams:
Light Status
White Flashing Incoming call
Solid Active call
Red Solid Mute on
Purple Solid
Active Teams call
with other device
/ Nocallactivity /
Callonhold
RECEIVER LIGHT INDICATOR
Incoming call
Active call
Mute on
Incoming call
Active call
Mute on
Active Teams call
with other device/
No call activity/
Call on hold
9English

CASE LIGHT INDICATOR
State
Light Indicator
Status
Left Middle Right Color
Plug into power
source
Solid White
Left earbud is fully
charged
Case is fully charged
Right earbud is fully
charged
Pulsing White
Left earbud is
charging
Case is charging
Right earbud is
charging
Insert earbuds in the
case
Pulsing White for
3 seconds Earbuds inserted
Low battery Solid Red Case battery <20%
Long press pairing
button for 3 seconds Blinking White Pairing mode
Long press pairing
button for 20 seconds Blinking White Factory reset
10 English