Ltech SPI-16 User manual

SPI-16 Controller:M16 Remote:
SPI-16
L E D F a n t a s t i c c ontroller
3. The Remote Instruction:
SPI-16 LED Fantastic controller SPI-16 LED Fantastic controller
1 2
Package Size: L132×W198×H22(mm)
★ Connect power supply to pixel LEDs separately, in case of overvoltage, overcurrent to the receiver.
Receiver only supply a signal to the LEDs.
TLS3001
P9813 9813
3001
8
16
100
160
360
**008
**016
**100
**160
**360
RF WIRELESS
Wall-mounted
2. Product Dimension:
Speed
Brightness
Direction
0-15
Mode Keys
On/Off
Scene Keys
Loop Playback
Pause/Continue
Setting Key
7 Colors Jump
7 Colors Horse Race
6 Colors Trail
6 Colors Float
7 Colors Flash
7 Colors Circle Horse Race
6 Colors Circle Trail
6 Colors Double Trail
7 Colors Fade
7 Colors Flow
Gradients Trail
Color White Float
7 Colors Smooth
7 Colors Gradients Flow
White Meteor
Bi-color Float
Other Setting Instructions of Remote
[Attn ]: The running light of SPI-16 controller flashes 2s means set completed.
Long press to save
the current scene
IC Type Setting e.g. Pixel Setting e.g.
Range: 8-360 pixels
RGB Order Setting
The Learning ID Method:
The receiver and remote are Pre-synced at factory. If deleted
accidentally, the sync method is as follows (multiple remotes
could be synced to one receiver):
Learning ID:
Press “ID learning button” on the SPI-16 receiver
light flicker several times, canceled.
in 5s, the running
Short press “ID learning button” on the SPI-16 receiver, the running
light is on. Then press any keys on the remote M16, the running
light flicker several times, activated.
Canceling ID:
1.
2.
Manipulate table for choosing ICs, RGB order or pixel No..
Loop playback: Short press key, then continuous press any 0-15 numeric keys, last press key to finish.
Controller will play cycle the corresponding mode of the numeric key.
Method for selecting IC / RGB Sequence:
Can control the following pixel LEDs: TM1804/TM1809/TM1812/UCS1903/UCS1909/UCS1912/UCS2903/
UCS2909/UCS2912/WS2811/WS2812 in factory default.
1. Product Parameter:
5
SPI-16 is a Mini LED pixel controller, equipped with RF remote M16, almost able to control all IC-driven LED
lights. Compact and powerful, various built-in changing effects and customized scene modes can bring you
fantastic color!
By RF remote control M16, you can select from a variety of dynamic lighting effects, set controlled pixels
quantity, adjust the changing speed and brightness, change the lighting moving direction, adjust RGB
sequence, select the IC type, store and play customized scene etc.
ower Input 5~24Vdc
Output : SPI
Working Temperature:
Dimensions: L135×W30×H20(mm)
Weight(N.W.): 47g
Compatible driving IC: Many kinds, can be customized also
P : Working Voltage: 3V (battery
Working Frequency: 433.92MHz
Remote Distance: 30m
Working Temperature:
Dimensions: L104×W58×H9(mm)
Weight(N.W.): 42g
CR2032)
135g
Total Weight(G.W.):
When setting IC type, pixel number and RGB order, select multiple keys at uniformed speed. Not too fast.
-30 ~55
-30 ~55

3
5. Wiring Diagram:
4
SPI-16 LED Fantastic controller SPI-16 LED Fantastic controller
6. Attention:
7. Warranty Agreement:
6.1 The product shall be installed and serviced by the qualified person.
6.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure
it is mounted in a water proof enclosure.
6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
6.4 Please check if the output voltage of the LED power supply used comply with the working voltage of
the product.
6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector.
6.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to
the LED lights.
6.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself.
7.1 We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement
if cover manufacturing faults only.
For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
7.2 Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and
overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
7.3
7.4 Any amendment or adjustment to this warranty must be approved in writing by LTECH only.
★ This manual only applies to this model. reserve the right to make changes without LTECH prior notice.
Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
We shall not be liable for any incidental or consequential damages for breach of any stipulation
in this warranty.
Update Time: 2016.08.19
www.ltechonline.com
b. Light fixtures and controller using different operating voltages.
a. Conventional connection method.
5.4 LED pixel strip wiring diagram:
ID Learning Button
Power Input Socket
Running Light
4. Terminal Description:
LED Lamps
Connection Socket