Malta Dynamics A6317 User manual

Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture.
Universal
Standing Seam
Roof Anchor
A6317 Instruction Manual

2
InstructionManual
MaltaDynamics.com | 800-494-1840 16 Manual Revision Code:
20200212
Manual Revision Code:
20200212
4Manual Revision Code:
20200212
Manual Revision Code:
20200212
4Manual Revision Code:
20200212
Manual Revision Code:
20200212
4Manual Revision Code:
20200212
Manual Revision Code:
20200212
4Manual Revision Code:
20200212
Manual Revision Code:
20200212
4Manual Revision Code:
20200212
Manual Revision Code:
20200212
4Manual Revision Code:
20200212
Manual Revision Code:
20200212
4Manual Revision Code:
20200212
Manual Revision Code:
20200212
Manual Revision Code:
20200212
Universal Standing Seam Roof Anchor A6317
INSTRUCTION MANUAL
These instructions apply to the following model(s):
A6317 Universal Standing Seam Roof Anchor
Manual Revision Date:
20200212
A copy of this manual must be available to users at all times. Visit www.MaltaDynamics.com
for the latest user instruction manual based upon date of manufacture.
TABLE OF CONTENTS
Under Penalty of Law ------------------------------------------------- 3
Purpose ----------------------------------------------------------------- 3
Performance ----------------------------------------------------------- 3
Instructions for Use ---------------------------------------------------- 4
Limitations for Use ----------------------------------------------------- 6
Connector Compatibility Limitations --------------------------------- 7
Clearance Factors ------------------------------------------------------ 8
Training ----------------------------------------------------------------- 10
Frequency -------------------------------------------------------------- 12
Cleaning and Maintenance -------------------------------------------- 13
Safety Info -------------------------------------------------------------- 13
Product Labels --------------------------------------------------------- 14
Inspection Log --------------------------------------------------------- 15
Warranty ---------------------------------------------------------------- 16
Instructions for Installation -------------------------------------------- 5

MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 3
Universal Standing Seam Roof Anchor
Instruction Manual
UNDER PENALTY OF LAW
This manual must be read and understood in its entirety and used as part of
your fall protection training program as required by OSHA 1926 and State and
local regulatory agencies. This instruction manual is intended to meet industry
standards required by OSHA and should be used as part of an Employee Fall Safety
training program as required by OSHA. User must read and fully understand the
limitations and proper use of the equipment, and be properly trained by employer
prior to use per OSHA 29 CFR 1910.66, 29 CFR 1926.503, and applicable local
standards.
NOTE: This User Instruction Manual is not to be removed except by the user
of this equipment. Current User Instruction Manuals must always be available
to the user. Read and understand these instructions before using equipment.
Instructions can be downloaded from www.maltadynamics.com website.
PURPOSE
Malta Dynamics Universal Standing Seam Roof Anchor, A6317 is intended for
use as part of a comprehensive personal fall arrest (PFAS) or personal fall restrain
(PFR) system. Standing Seam Roof Anchor is designed for use as a temporary
anchorage connector for a PFAS or PFR system.
The A6317 must never be used to lift, hang, or support equipment. When used
as part of a comprehensive PFAS, workers must also use a full body harness and
shock absorbing lanyard/self-retracting lifeline that limits free fall to a maximum
of six feet. When used as part of a comprehensive PFRS, workers must use a full
body harness OR a work positioning belt and lanyard.
PERFORMANCE
A6317 Universal Standing Seam Roof Anchor has a minimum tensile breaking
strength of 5,000 lbs. (22.2 kN) when statically tested.
Misuse or failure to follow warnings, instructions and limitations
on the use of this equipment may result in serious personal
injury or death. Maximum 1 attachment per connection type.
For further instructions about proper use, refer to supervisor or
contact Malta Dynamics at 1-800-494-1840.
WARNING
WARNING
WARNING

MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
Universal Standing SeamRoof Anchor
InstructionManual
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
INSTRUCTIONS FOR USE
Do not alter or intentionally misuse this equipment.
WARNING
WARNING
WARNING
Anchor must be positioned to apply load in the long axis of the anchor bracket.
After removal of the roof anchor, roof surface may require repairs. It is the
responsibility of the installer to make applicable repairs to the roof materials.
The Malta Dynamics Roof Anchor can be used on a maximum roof slope of 12/12
pitch.
The Standing Seam anchor must be attached to fully seamed panels.
Tighten down set screws to 50 ft/lbs.
Bulb of Standing Seam- .65in to .90in
Minimum Thickness for Galvalume - .0197 in.
Minimum Thickness for Aluminum- .0394 in.
When multiple roof anchors are installed, the strength (static load) above must
be met at each roof anchor’s installation point independently. (E.g. If two roof
anchors are installed onto a roof structure, each of the two anchor location must
be independently capable of supporting 5,000 lbs.(22.2 kN) or 3,600 lbs. (16.0
Model/
Part #MaterialStandard Regulation
Service
Temperature
Minimum
Breaking
Strength
(MBS)
Max
Users
Permitted
User
Capacity
Limit
Fasteners
A6317Aluminum
Alloy
OSHA 1926
subpart M,
OSHA 1910
-30°F - 130°F
(-34°C - 54°C)
5,000 lbs.
22.2 (kN)1
130 - 310 lbs.
(58-140kg)
Qty 8,
set screws
included

MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5
Universal Standing Seam Roof Anchor
Instruction Manual
A6317 INSTALLATION INSTRUCTIONS
Tools Needed for Installation:
•Torque wrench
•5mm Hex/Allen bit
•8mm Hex/Allen bit
Tools Needed for Installation:
Certain types of seams will stretch as the set screws are torqued. Set screws
must be torque-checked with a torque wrench prior to each connection to ensure
the seam has not stretched and lowered the torque setting. A torque wrench that
reads in ft/lbs, a 8mm, and a 5mm hex bit are required to properly install the
anchor. It is imperative that the set screws be torqued to the correct level, not
under-torqued and not over-torqued. Under-torquing will reduce the attachment
strength of the A6317, and over-torquing can damage the seams. Failure to
choose the correct set screws and torque setting could result in serious injury or
death. The A6317 must be positioned a minimum of 6’ from any fall hazard or
roof edge. A minimum of 144 square feet of roof area is required for attachment.
Steps to installation:
1. Loosen all 8 set screws wide enough to allow the anchor body to set down over
the seam.
2. Position the tips of the 4 set screws on one side of the anchor in a straight row
about halfway across from the clamp opening.
3. Use a screw gun or ratchet with a hex bit to tighten set screws on the opposite
side of the anchor making sure the anchor stays centered. DO NOT USE AN
IMPACT GUN!
4. Be sure the screw gun clutch is set to avoid over tightening the set screws. Final
torquing should always be done with a torque wrench. All 8 screws should be
torqued to 50 ft/lbs. REMINDER: Check twice prior to use to ensure seam has
not stretched.
5. The A6317 is not ready to use.
Do not use Impact Gun to tighten set screws!
WARNING

MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
Universal Standing SeamRoof Anchor
InstructionManual
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 6 Manual Revision Code:
20200212
If roof anchor is not installed properly, it will not hold the rated loads and
serious injury or death could occur.
LIMITATIONS FOR USE
• Do not use this equipment if you are unable to tolerate the impact of a
a fall. Consult with a physician if in doubt. Minors, pregnant women,
and anyone with a history of back and/or neck problems must not use
this equipment.
• Use caution when employing this equipment around machines, electrical
hazards, chemical hazards and sharp edges or abrasive surfaces, as
contact may cause equipment failure, personal injury, or death.
• All synthetic material must be protected from slag, hot sparks, open
recommended in these applications.
• Users must have a written rescue plan and the means to implement
it. This plan must provide prompt employee rescue or assure that
employeeshave the ability to rescue themselves in the event of a fall.
• Altering or misuse of this product could lead to injury or death.
• Use only with compatible components of subsystems. Substitutions or
replacements made with non-approved components may jeopardize
equipment compatibility and affect system safety and reliability.
•
material, etc., that could accelerate cutting or abrading of attached
components.
WARNING
WARNING
WARNING
A6317
A6317
Figure 1: Instructions for Loading

MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 7
Universal Standing Seam Roof Anchor
Instruction Manual
CONNECTOR COMPATIBILITY LIMITATIONS
Malta Dynamics equipment must be coupled only to compatible connectors that
are suitable to your application. Ensure all connections are compatible in size,
shape and strength. Ensure all connectors are fully closed and locked. OSHA 29
CFR 1926.502 prohibits the use of snap hooks to engage to objects unless the
following requirements are met:
• Snap hook must be an ANSI-style locking model.
• Snap hook must be explicitly designed for such a connection, meaning that
in question.
Use of a non-locking snap hook can result in rollout (a process by which a snap
hook or carabiner unintentionally disengages from another connector or the
object to which it is coupled (ANSI Z359.0- 2012). Malta Dynamics connectors
product’s user’s instructions.
Avoid the following types of connections:
• Two or more snap hooks or carabiners attached to one D-Ring.
• A snap hook connected to its integral lanyard.
• A snap hook connected to a horizontal lifeline.
• Connection in a manner that results in a load on the gate. NOTE: Large throat
opening snap hooks should not be connected to standard size D-Rings or
similar objects. This could result in a load on the gate if the hook or D-Ring
twists or rotates. Large throat snap hooks are designed for use on structural
elements such as rebar or cross members that are not shaped to capture the
gate of the hook.
• False engagement connections, where protruding features of the snap hook
or carabiner may catch on the anchor and seem fully engaged to the anchor
• Connection to snap hooks or carabiners.
• Direct connection to webbing lanyard, webbing loop, rope lanyard or tie-back
(unless the manufacturer’s instructions for both the lanyard and connector
• A snap hook connected to a D-Ring, Rebar, or other connection point with
become depressed by the turning motion of the snap hook; the snap hook or
carabiner may not fully close and lock or roll-out may occur.
Illustration 1 depicts examples of inappropriate connections:

MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
Universal Standing SeamRoof Anchor
InstructionManual
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 8Manual Revision Code:
20200212
Before Each Use:
• Inspect the anchor for any damage or soiling (dirt, oil, paint, etc.)
• Ensure self-locking snap hooks & carabiners work properly. Inspect rope or
webbing for wear, cuts, burns, frayed edges, or other damage.
• Anchorage: Select a rigid anchorage point capable of supporting required
loads. Select appropriate anchorage point that will reduce possible free fall
and swing fall hazards and avoid striking an object during a fall. Anchorage
should be level (horizontal) in order to prevent the connector from sliding on an
incline when in use, which could cause serious injury to the user.
• Fall Clearance:
fall area to arrest the fall before striking the ground or other object.
• Free Fall: Personal fall arrest systems must be rigged in such a way that the
free fall does not exceed 6 ft. Avoid working above the anchorage level to
avoid an increase in fall distance.
• Fall Arrest Forces: The assembled Personal Fall Arrest system must limit
maximum arrest forces to 1800 pounds (8 kN) or less. Deceleration distance
shall not be allowed to exceed 48 in.
CLEARANCE FACTORS
Clearance Required is Dependent On the Following Factors:
• Elevation of Anchorage
• Connecting Subsystem Length
• Deceleration Distance
• Free-Fall Distance
• Worker Height
• D-Ring/Connector Length
• Movement of Harness
Attachment Element
• Length of Full Body Harness
FBH) Stretch
• Working Level
See Illustration 2.
Illustration 1: Inappropriate Connections
Illustration 2: Fall Clearance Considerations
A. Connecting Subsystems (Energy
Absorbing Lanyard shown) Length +
Movement of Harness Attachment +
Length of FBH Stretch + Settling of
User’s Body While in the Harness
B. Working Level (Thickness)
C. Worker Height + Connector Length
D. Free-Fall—6’ Max. (per ANSI
Z359.1)
E. Deceleration Distance
F. Total Fall Distance: Sum of A
through E
G. Lower Level or Obstruction

MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 9
Universal Standing Seam Roof Anchor
Instruction Manual
If there is a risk of fall or if the only anchorage point is below the attachment points
on the harness, it is essential to use a lanyard provided with an energy absorber.
below the user to prevent any collision with the structure or the ground.
Calculating Total Fall Distances:
Total Fall Clearance below worker
is calculated from Anchorage
Connection. Free Fall Distance +
Working Level + Energy Absorber
+ Deceleration Distance + Worker
Height + Connector Length + Safety
Factor. Ensure that total fall distance is
clear of obstructions and equipment.
Avoid potential contact with a lower
level. See Illustration 3.
• Thoroughly evaluate and plan all elements of fall protection system(s) before
using this equipment. Make sure that your Personal Fall Arrest System is
appropriate for your needs and facility. Calculate fall clearance and swing
fall clearance. The amount of clearance required is dependent on the type of
connecting subsystem, the anchorage location, and the amount of stretch in
the lifeline. When calculating distance, be sure to consider:
• Deceleration Distance
• Movement of harness attachment element (D-Ring, Harness Stretch)
• Free Fall Distance
• Height of the Worker (how tall is the worker?)
• Elevation of Anchorage Connector
• Connecting Subsystems Length
• Swing Falls occur when the anchorage point is not directly above the point
of a fall. The force of striking an object in a swing may cause serious injury or
death. Minimize potential for swing falls by working as close to the anchorage
point as possible. Do not permit a swing fall if injury could occur. Swing falls
See Illustration 4.
Illustration 3: Calculating Total Fall Distance
Total Min.
19 ft. from
Anchorage
6 ft. Energy
Absorbing
Lanyard
Length
4 ft.
Deceleration
Distance
6 ft.Worker
Height
3 ft. Safety
Factor
6 ft. Free Fall ANCHORAGE
Total Min.
20 ft. from
Anchorage
6 ft. Energy
Absorbing
Lanyard
Length
5 ft.
Deceleration
Distance
6 ft.Worker
Height
3 ft. Safety
Factor
12 ft. Free Fall ANCHORAGE
Illustration 4: Examples of Swing Fall Hazards

MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
Universal Standing SeamRoof Anchor
InstructionManual
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 10 Manual Revision Code:
20200212
TRAINING
Employers are responsible for providing training to any employee who may be
exposed to fall hazards in order to enable the employee to recognize and reduce
fall hazards during the training course.
INSPECTION
The authorized person, authorized rescuer or others using this equipment must
comply with these instructions. It is recommended the program administrator, or
other similarly recognized person, retain the manufacturer’s user instructions and
require them to be read, understood and readily available to all users.
Authorized person or rescuer shall inspect equipment before each use.
inspections annually.
The program administrator shall set inspection criteria for the equipment. Such
criteria shall equal or exceed the most restrictive of the criteria established by
the user instructions. Keep inspection criteria current in relationship to changing
patterns or conditions of use.
The program administrator shall maintain documentation of equipment inspections.
This documentation shall include, at a minimum, the identity of the equipment,
inspection and the results of that inspection.
• Avoid working where your lanyard, lifeline or other system components
will be in contact with, or abrade against, unprotected sharp edges.
• A Competent Person must ensure the compatibility of all connections
and that of the system.
• Do not use the system if any component in the system does not
operate properly.
WARNING
WARNING
WARNING

MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 11
Universal Standing Seam Roof Anchor
Instruction Manual
When an inspection reveals:
• defects in equipment; or
• damage to equipment; or
• inadequate maintenance of equipment; or
• activated stress indicators; or
• activated warning systems or devices; or
• deformation exceeding the manufacturer’s stated limits;
Permanently remove equipment from service.
In addition to the inspection requirements set forth in the user instructions, inspect
equipment at each inspection level described for:
• absence or illegibility of markings or tags;
•
• evidence of defects in or damage to hardware elements including cracks,
sharp edges, deformation, corrosion, chemical attack, excessive heating,
alteration and excessive wear;
• evidence of defects in or damage to straps, wire rope or ropes including
fraying, crushing, unsplicing, unlaying, kinking, knotting, roping, broken
or pulled stitches, broken or pulled wires or multiple broken wires, excessive
elongation, chemical attack, excessive soiling, abrasion, alteration, needed or
excessive lubrication, excessive aging and excessive wear;
• alteration, absence of parts, or evidence of defects in, damage to or improper
function of mechanical devices and connectors;
• any other condition that calls to question the suitability of the equipment for its
intended purpose.
If the equipment has arrested a fall or been damaged, remove the equipment
from service. Additionally, clearly mark or tag the equipment not for use and either
disposed of or serviced in accordance with the manufacturer’s recommendation.
If inspection reveals any defect, inadequate maintenance, or unsafe condition,
remove anchor from service immediately.
Any anchor that has been subjected to the forces of arresting a fall must be
removed from service immediately.
Note: Equipment must not be altered in any way, including attempted repair. Only
manufacturer, or entities authorized in writing by the manufacturer, may make
repairs to this product.
• Equipment must be free of corrosion, chemical attack, alteration, excessive
heat or extreme wear.
• All markings must be legible and attached to the equipment.

MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
Universal Standing SeamRoof Anchor
InstructionManual
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 12 Manual Revision Code:
20200212
FREQUENCY
• All equipment must be visually inspected prior to each use according to the
manufacturer’s instructions included at time of shipment. Inspections must
be performed by a Competent Person other than the user (as dened by
OSHA) a minimum of once per year (annually).
• Record the results of each formal inspection in your inspection log.
•NOTE: Per Cal/OSHA PFAS must be inspected by a competent
person at least a year, in accordance with the manufacturer’s
recommendations, with inspection dates documented.
CLEANING, MAINTENANCE, AND STORAGE
Cleaning
Wipe off all surface dirt. Store in clean, dry space, away from heat and areas where
chemical vapors may exist. Avoid storing in direct light to prevent UV degradation.
Maintenance
Do not attempt to disassemble or repair. Only Malta Dynamics or entities authorized
in writing by Malta Dynamics shall make repairs, authorize maintenance, or make
alterations to the equipment.
Tag equipment which is in need of or scheduled for maintenance not for use until
maintenance is performed.
Storage
Store equipment in a manner as to preclude damage from environmental factors
such as heat, light, excessive moisture, oil, chemicals and their vapors or other
degrading elements.
SAFETY INFO
Anchorage Strength:
Anchorage selected for Personal Fall Arrest Systems must meet all anchorage
strength requirements.
•Personal Fall Arrest:Anchorages used for PFAS must be capable of sustaining
static loads in the direction permitted by the PFAS of at least: 3,600 lbs. with
than one PFAS is attached to an anchorage, the strengths stated above must be
met independently at and for each anchorage location.
• Work Positioning:The structure to which the work positioning system is attached
must sustain static loads applied in the directions permitted by the work positioning
system of at least 3,000 lbs., or twice the potential impact load, whichever is

MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 13
Universal Standing Seam Roof Anchor
Instruction Manual
greater. See OSHA 1926.502. When more than one work positioning system is
attached to an anchorage, the strengths stated above must be multiplied by the
number of work positioning systems attached to the anchorage.
• Restraint:Anchorages selected for rescue systems must be capable of
sustaining static loads of at least: 1,100 lbs. When more than one restraint and
travel restraint system is attached to an anchorage, the strengths stated above
must be multiplied by the number of work positioning systems attached to the
anchorage.
• Rescue:The structure to which rescue system is attached must sustain static
loads applied in the directions permitted by the work positioning system of at
OSHA1926.502. When more than one work positioning system is attached to an
anchorage, the strengths stated above must be multiplied by the number of work
positioning systemsattached to the anchorage.
Fall Arrest
5,000 lbs.(22.2kN)
Multiple Systems: When more than one of the
the number of systems attached to the
anchorage.
3,600 lbs. (16.1kN)
Restraint
1,100 lbs. (22.2kN)
≥ 2 Times the Maximum
Potential Impact Load
Work
Positioning
3,000 lbs. (22.2kN)
Personal Fall Arrest, Work Positioning,
the potential fall or that meets the criteria for
by relevant ANSI and OSHA standards.
≥ 2 Times the Maximum
Potential Impact Load
Rescue
3,000 lbs. (22.2kN)
≥ 5 Times the Maximum
Potential Impact Load

MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
Universal Standing SeamRoof Anchor
InstructionManual
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 14 Manual Revision Code:
20200212
PRODUCT LABELS
product and must not be removed:

MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 5MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instructionmanual based upon date of manufacture. 15
Universal Standing Seam Roof Anchor
Instruction Manual
INSPECTION LOG
Date of Manufacture: _________________________________
Model Name/#:_______________________________________
Serial: _______________________________________________
Date of First Use: ____________________________________
Inspection DateItems NotedCorrective Action Approved By

MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
Universal Standing SeamRoof Anchor
InstructionManual
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840 4Manual Revision Code:
20200212
MaltaDynamics.com | 800-494-1840
Manual Revision Code:
20200212
16
WARRANTY
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Equipment offered by Malta Dynamics is warranted against factory
defects in workmanship and materials for a period of one year from date of
in writing, Malta Dynamics will repair or replace all defective items at Malta
Dynamics’s sole discretion. Malta Dynamics reserves the right to require that
the defective item be returned to its plant for inspection before determining
the appropriate course of action. Warranty does not cover equipment damage
resulting from wear, abuse, damage in transit, failure to maintain the product
or other damage beyond the control of Malta Dynamics. Malta Dynamics shall
be the sole judge of product condition and warranty options. This warranty
applies only to original purchaser and is the only warranty applicable to this
product. Please contact Malta Dynamics customer service department at
800-494-1840 for assistance. LIMITATION OF LIABILITY: IN NO EVENT WILL
MALTA DYNAMICS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO LOSS OF
PROFITS, IN ANY WAY RELATED TO THE PRODUCTS REGARDLESS OF THE
LEGAL THEORY ASSERTED.
800-494-1840
MaltaDynamics.com
210 13th Street
Malta, OH 43758 USA