Marcy ME-706 User manual

REGENERATING
MAGNETIC RECUMBENT BIKE
ME-706
IMPORTANT: Please read the Important Safety Notice and Assembly Information in
the Owner’s manual before assembling this product.
Assembly Manual
190429

©IMPEX INC. www.marcypro.com
1
NO:1 NO:7 NO:32 NO:4 NO:34
NO:2
NO:5R
NO:8 NO:19L/R
NO:3 NO:5L
NO:33 NO:23L/R NO:6NO:37
NO:97L/R
Part No.
Description
Q'ty
1
Main frame
1
7
Rear support tube
1
32
Seat support bracket
1
4
Front post
1
34
Back cushion
1
2
Front stabilizer
1
3
Rear stabilizer
1
8
Front post cover
1
19L/R
Pedal (L&R)
1
97L/R
Rear support tube Cover (L&R)
1
5L/R
Handlebar L & R
1
37
Rear handlebar
1
33
Seat cushion
1
23L/R
Left /Right cover for sliding tube
1
6
Computer
1

©IMPEX INC. www.marcypro.com
2
STEP 1
Attach Front Stabilizer (#2) with Allen Bolt (#21), Locking washer (#98), and Curved washer (#15) to the
Main Frame (#1).
21
98
15
2
1
2X
2X
2X
21
98 15
?"
STEP 2
Attach the Rear Stabilizer (#3) with Allen Bolt (#21), Curved washer (#15) and Locking washer (#98) to the
Rear Support tube (#7).
7
21
15
98
3
2X
2X
2X
21
98 15
6mm

©IMPEX INC. www.marcypro.com
3
STEP3
1.Connect Main Frame (#1) and Rear Support tube (#7) with Allen Bolt (#14) and Flat washer (#16).
2.Attach the Level Adjustment (#25).
6mm
6X 6X
1X
14 16 25
1414
1414
16
16
25
STEP 4
1. Slide Front post cover (#8) onto Front post (#4).
2. Connect Middle computer wire (#9), Front extension hand pulse wire (#10) to Middle extension hand
pulse wire (#17) and Lower computer wire (#18).
3. Attach the Front Post (#4) to the main frame with Allen Bolt (#14), Curved washer (#15) and Flat washer
(#16).
4X
14
6X
16
14 14
15 16
16
10 9
18 17
2X
15

©IMPEX INC. www.marcypro.com
4
STEP 5
Connect the computer sensor wire and the computer wire to the Front post connectors, and attach the
computer (#6) to the Front Post with the pre-assembled Screws (#12).
6
12
STEP 6
Secure the Handlebar (#5L, #5R) to the Front Post with Allen Bolts (#14).
14
14
5R
5L
4X
14

©IMPEX INC. www.marcypro.com
5
STEP 7
1. Slightly lift the Seat bracket (#94) as it slides into the Rear support tube (#7).
2. Thread in the Ball end cap (#35) into the Quick release handle (#29).
32
35
1
94
7
STEP 8
Attach the Cover for Sliding tube (#23L, #23R) with Self-tapping screws (#26) and Screws (#28).
28
28
28
26
26
23L
28
23R

©IMPEX INC. www.marcypro.com
6
STEP 9
1. Secure the Rear Handlebar (#37) to the Seat bracket (#94) with Curved washer (#15), Carriage bolt (#43)
and Acorn nut (#44).
2. Connect Hand pulse wire (#42) and Rear extension hand pulse wire (#22).
22
44
15
43
42
2X
43
2X
44
1
37

©IMPEX INC. www.marcypro.com
7
STEP 10
Attach the Seat cushion (#33) to the Seat bracket (#94) with Allen Bolts (#14).
4X
14
14
133
STEP 11
Attach Back Cushion (#34) to the Seat bracket (#94) with Allen bolts (#14).
14
4X
14

©IMPEX INC. www.marcypro.com
8
STEP 12
Attach the Rear support tube cover (#97L, #97R) with Self-Tapping screw STx5 ½ (#26) and Self-Tapping
Screw ST5x ¾ (#55).
55
26
55
97R
97L
STEP 13
Thread the Left Pedal (#19L) and Right Pedal (#19R) into the crank.
19L
19R

©IMPEX INC. www.marcypro.com
9
IMPEX®INC.
2801 S. Towne Ave, Pomona, CA 91766
Tel: [phone] Fax: [phone]
www.marcypro.com
[e-mail]