Markant HYBRID SOFA User manual

HYBRID SOFA INSTALLATION MANUAL

1
Cap screw M6 x 30mm
Power tool
Allenkey
Cap screw M6 x 40mm
Leveler
Button cap screw M8 x25mm
Self tapping screw
HARDWARE
*POWER TOOL, ALLEN KEY & LEVELER ARE NOT INCLUDED
JCBC Screw
Measuring Tape

HYBRID SOFA INSTALLATION
2
STEP 1: Screw in both side of the leg and beam supporter.
STEP 2: Slot in the X-beam .

HYBRID SOFA INSTALLATION
3
STEP 3: Repeat Step 1 on the other leg installation. Insert in tapping screw on top of the longer leg.
STEP 4: Slot in the other end of X-beam to the other leg.

HYBRID SOFA INSTALLATION
4
STEP 5: Repeat step 1-4 to install the second leg.
STEP 6: Tighten set screw on each frame.
Do not tighten set screw
Do not tighten set screw
Tighten set screw

HYBRID SOFA INSTALLATION
5
STEP 8: Snap in click x bizz class box to the X-beam.
STEP 7: Snap in click x seater to the X-beam.
*Click this in to attach the seat.

HYBRID SOFA INSTALLATION
6
STEP 9: Repeat step 6 to install the second seater.
STEP 10: Next, install the mushroom on top of the metal surface.

HYBRID SOFA INSTALLATION
7
STEP 13: Add in J bracket at the bottom of the seat.
*J-bracket
STEP 11: Slide in the upper top to complete the swivel top installation.
STEP 12: You will be able to slide the swivel top back and front and twist it 90°.

HYBRID SOFA INSTALLATION
8
STEP 14: Insert back panel to the seater. Hook in lockplate to the mushroom.
*Mushroom
*Lockplate
* Push legs in as far as possible (until they hit the 'click-x') and then tighten set screw at the end leg

HYBRID SOFA INSTALLATION
9
SERVICE
*Thighten the screw below
the swivel top.
THE INSTALLATION IS COMPLETE.