Markant Matrix Pro Wing User manual

Matrix Pro Wing
Manual
[1005]_MAI_[Matrix Pro Wing]
*Extension pole: Purchase separately
(custom size available up to 3 meters)

markantoce.com 2
MAIN COMPONENTS
TOOLS & MANPOWER
Component A (x3) Component B (x6) Component C (x3)
Manpower x2 OPTION 1: Power Tool x2 OPTION 2: Allen Key x2 Mallet x2 Leveler
Frame
1
A
B
C
*leveler
*leveler
*leveler
*leveler
*leveler
*leveler
A B C

21 2
3 4
5 6
7 8
C
A
B
A
carton block carton block
There are 3x Matrix Pro single frame (A). All the frame (A) are
pre-assembled.
Raise the legs, slide the frame outwards to t desired size and x
it with the bolts that are already mounted in the frame.
Attach B to A by secure the pre-assembled screw using Allen key.
Repeat Step 3 on the other side of the frame A and repeat it 4x to
the rest of Part A and B.
Attach C to A by using mallet. Repeat Step 3 for another 2x to the other parts.
Adjust the table length to 1372mm and secure the screw
using Allen key. Repeat this step on the other 2 remaining
legs.
Finally secure the lock plate under the C with screw using Allen
key. Repeat this step 2x to the other part of the legs.
B
A
A
C
1372mm
3

markantoce.com 4
MAIN COMPONENTS
TOOLS & MANPOWER
Component A (x3) Component B (x3) Component C (x3) Component D (x3) Component E (x3) Component F (x3) Component G (x3)
Manpower x1 Power Tool x1 Allen Key x5
Accesories
2
A
C
B
E
D
F
C E
A B C D E F G

E
D
Attach E (with the pre-install screw) to the key hole of D and
tighten it using Allen key.
The installation on the rst accesories part is completed.
Use handrill with self-tapping screw to attach A to B. Repeat this
step for another 2x to the rest of the components. Make sure to
setup 15N torx on the handrill to prevent any damage.
Screw B to D by using JCBC screw. Repeat this step for another
2x to the rest of the components.
Cover up both part with C and F. Repeat this step 2x for Compo-
nent C.
Finally attach the accesories on top of the standard Matrix Pro
Wing.
B
A
DB
C
F
2
4
56
3
1
5

markantoce.com 6
MAIN COMPONENTS
TOOLS & MANPOWER
A
BC
D
E
Component A (x3) Component B (x3) Component C (x3) Component D (x3) Component E (x3) Component F (x3)
Manpower x1 Power Tool x1 Allen Key x5
Screen
3
ABC D EF

*metal cap
F
*slide up the lid
D
E
*hold this to open the
fabric screen.
A
B
*bridge
C
E
Attach C to the pole with a (E) screw and tighten it using Allen
key. Repeat this step for the other 2.
Attach B on top of the bridge and slot in A to tighten and secure
its position. Repeat it 2x.
Pull out the fabric screen to get access to the inside part. Attach
the screen by using (E) screw and tightned it using Allen key.
Repeat this step 2x.
Take out the metal cap from
the power pole.
Attach the top part of the screen by using (F) screw and tighten
it using Allen key. Repet this step 2x on the other 2 screen. Cover
back the lower pole lid and the metal cap afterward.
The screen installation is completed.
Slide up the lid to get access
inside the pole.
2
4
56
3
1
7

markantoce.com 8
MAIN COMPONENTS
TOOLS & MANPOWER
Front Gutter & Elbow
4
B
A
[A] Elbow (x1)
[B] Smart Gutter (x1)
Manpower x1 Power Tool x1 Allen Key x5
A B

Attach A by slotting it’s bottom adapter into the Main Gutter
holes. Once inserted, fold the A.
Then attach top part A to bottom B.
Lastly, attach the B using JCH screw under the table top. The installation of the Smart Gutter and elbow is completed.
A
*fold the end of A
once inserted in
A
B
B
*this can be fold
by hand
9

markantoce.com 10
*Extension pole: Purchase separately
Cabling from ceiling
5
Take out the metal cap and slide
up for both poles.
Attach the extension pole to the
bottom pole.
Put in the cabling from the
ceiling.
Close back the lid and the cabling
installtion is completed.
*wing extension
pole
*cabling from ceiling
*cables

markantoce.com 11
MAIN COMPONENTS
TOOLS & MANPOWER
Control Box
6
A
B
Please refer handset manual
instruction that is provided.
[A] Elbow (x1)
[B] Smart Gutter (x1)
Manpower x1 Power Tool x1 Allen Key x5

markantoce.com 12
(A) Handset (B) Actuator (C) Control Box (F) Wall Socket
(D) Power Extension A (E) Power Extension B
ABC
DEF
STEP 1: Attach (C) control box below the table top using self-tap screw.
STEP 2: Plug in the main plug to the power extension (D) inside the trunk towards the power extension (E) inside the smart gutter.
*Smart Gutter

markantoce.com 13
(A) Handset (B) Actuator (C) Control Box (F) Wall Socket
(D) Power Extension A (E) Power Extension B
Cable line from (C) control box to the (A) handset.
Cable line from the (C) control box to the (B) actuator.
Cable line from the (D) power extension A inside the
trunk to the (E) power extension B inside the front
gutter.
1
2
3
Cable line from the (E) power extension B inside the
front gutter to the Media Hub.
Cable line from the (E) power extension B to the
monitor arm.
Cable line from the (E) power extension B to the
C (control box).
4
5
6
Cable line from the (F) wall socket to the
(D) power extension A.
7
1 2 3 4
5 6 7
STEP 3: Attach the cable point to the rest of the accesories.
STEP 4: Reset procedure to follow before use: Hold up- and down button until desk is in lowest
position and then slightly goes up.
Please refer to the handset
manual.

markantoce.com 14
Recycleable Guideline
6
NO. ITEMS QTY MATERIAL WEIGHT (g) / pc RECYCLABLE/
NON-RECYCLABLE
1 3 Metal 20302.64 RECYCLABLE
2 6 Metal 861.36 RECYCLABLE
3 3 Metal 2559.88 RECYCLABLE
5 3 Aluminium 1639.68 RECYCLABLE
8 1 Aluminium 1331.86 RECYCLABLE
9 1 Metal 261.09 RECYCLABLE
7 1 Metal 904.16 RECYCLABLE
6 3 Aluminium 662.33 RECYCLABLE
10 3 Metal 1175.252 RECYCLABLE
11 3 Metal 1211.84 RECYCLABLE
4 3 Metal 260.51 RECYCLABLE
*detach the
adjustable feet
*detach rubber
*metal to be remove
*detach plastic
All components are easy to dismantle and recycle. Undo the step of all installation for recycleable or reuse purposes.

markantoce.com 15
7
NO. ITEMS QTY MATERIAL WEIGHT (g) / pc RECYCLABLE/
NON-RECYCLABLE
12 3 Metal 365.15 RECYCLABLE
13 3 Metal 657.69 RECYCLABLE
14 3 Aluminium 4216.20 FABRIC - RECYCLABLE
16 3 XXX 10 RECYCLABLE
19 3 XXX 50
20 3 XXX 350
18 3 XXX 10 RECYCLABLE
17 3 XXX 10 RECYCLABLE
15 3 XXX 10 RECYCLABLE
(WEEE) WASTE ELECRICAL
&
ELECTRONIC EQUIPMENT
*detach fabric
(WEEE) WASTE ELECRICAL
&
ELECTRONIC EQUIPMENT