Markant Matrix Pro Wing User manual

Matrix Pro Wing installation manual
MAIN COMPONENTS
Component A (x3) Component B (x6) Component C (x3)
(frame)
TOOLS & MANPOWER
Manpower x2 OPTION 2: Allen Key x2
OPTION 1: Power Tool x2 Mallet x2 Leveler
A
B
C
*leveler
*leveler
*leveler
*leveler
*leveler
*leveler

C
A
A
C
There are 3x Matrix Pro single frame (A). All the frame (A) are
pre-assembled.
1 2
3 4
5 6
7 8
Raise the legs, slide the frame outwards to fit desired size and fix it
with the bolts that are already mounted in the frame.
Attach B to A by secure the pre-assembled screw using Allen key.
Repeat Step 3 for another 2x to the other parts.
Attach C to A by using mallet.
Adjust the table length to 1480mm and secure the screw using
Allen key. Repeat this step on the other 2 remaining legs.
Finally secure the lock plate under the C with screw using Allen key.
Repeat this step 2x to the other part of the legs.
1480mm
B
A
B
A
Repeat Step 3 on the other side of the frame A and repeat it 4x to
the rest of Part A and B.
carton block carton block
ip up the leg ip up the leg

Matrix Pro Wing installation manual
TOOLS & MANPOWER
Manpower x1 Allen Key x5
Power Tool x1
MAIN COMPONENTS
Component A (x3)
A
C
(accesories, elbow & front gutter)
B
E
Component B (x3) Component C (x3) Component D (x3) Component E (x3) Component F (x3)
D
F
Mallet x1

1 2
3 4
5 6
Finally attach the accesories on top of the standard
Matrix Pro Wing.
Screw B to D by using JCBC screw. Repeat this step for another
2x to the rest of the components.
DB
B
A
Cover up both part with C and F. Repeat this step 2x for
Component C.
Use Mallet to attach A to B. Repeat this step for
another 2x to the rest of the components.
Attach E (with the pre-install screw) to the key hole of D and
tighten it using Allen key.
E
D
The installation on the first accessories part is completed.
C
F

Matrix Pro Wing installation manual
(table top)
Attach table top on the frame and secure it using (E) screw. Repeat this step 2x on the other frame.
The installation for the table top is completed.
E

TOOLS & MANPOWER
Manpower x1 Allen Key x5
Power Tool x1
B
A
MAIN COMPONENTS
[A] Elbow (x1) [B] Smart Gutter (x1)
Matrix Pro Wing installation manual
(front gutter & elbow)

A
B
A
B
A
The installation of the Smart Gutter and elbow is completed.
Lastly, the B is self-tapped under the table top.
1 2
4
Attach A by slotting it’s bottom adapter into the Main Gutter
holes.
3
Then attach top part A to bottom B.

Matrix Pro Wing installation manual
(accesories)
TOOLS & MANPOWER
Manpower x1 Allen Key x5
Power Tool x1
C
MAIN COMPONENTS
(A) Handset (B) Media Hub (C) Monitor Arm
B
A

*tighten screw
*screw
*screw
B
A
Attach (A) Handset below the table top using a screw. The installation for (A) Handset is completed.
A
1
3
5
2
4
6
Attach (B) Media Hub on the table top. Tighten the screw on top of (B) Media Hub. The installation for Media
Hub is completed.
Attach (C) Monitor Arm on the table top. Tighten the screw at the bottom. The installation for (C) Monitor
Arm is completed.
B
C
C

Matrix Pro Wing installation manual
(control box)
MAIN COMPONENTS
[A] Control Box [B] Power Plug
A
B
Please refer handset manual
instruction that is provided.
TOOLS & MANPOWER
Manpower x1 Allen Key x5
Power Tool x1 Self Tap Screw

(A) Handset (B) Actuator (C) Control Box (F) Wall Socket(D) Power Extension A (E) Power Extension B
STEP 1: Attach (C) control box below the table top using self-tap screw.
STEP 2: Plug in the main plug to the power extension inside the trunk towards the power extension inside the front gutter.
ABC
DEF

(A) Handset (B) Actuator (C) Control Box (F) Wall Socket(D) Power Extension A (E) Power Extension B
Cable line from (C) control box to the (A) handset.
Cable line from the (C) control box to the (B) actuator.
Cable line from the (D) power extension A inside the
trunk to the (E) power extension B inside the front
gutter.
1
2
3
Cable line from the (E) power extension B inside the
front gutter to the Media Hub.
Cable line from the (E) power extension B to the
monitor arm.
Cable line from the (E) power extension B to the
C (control box).
4
5
6
Cable line from the (F) wall socket to the
(D) power extension A.
7
STEP 3: Attach the cable point to the rest of the accesories.
STEP 4: Press the RESET button before use.
1 2 3 4
5 6 7