Markant MAX HYBRID User manual

MAX HYBRID INSTALLATION MANUAL

INDEX
Chapter
HARDWARE
FRAME
1 - Rectangular
2 - Wing
ADJUSTABILITY
1 - HI-Tech (rectangular)
1 - E-drive (rectangular)
Optional
2 - E-drive (wing)
Optional
ELBOW
SCREEN
TABLE TOP
1 - Rectangular
2 - Wing
TOP LID
1 - Rectangular
2 - Wing
ACCESORIES
1 - Monitor Arm Installation
2 - Media Hub Installation
page 1
page 2-3
page 4
page 5
page 6-8
page 9
page 10-11
page 12
page 13
page 14
page 15
page 15
page 16
page 16
page 17
page 18
Page

1
Cap screw M6 x 30mm
Power tool
Allenkey
Cap screw M6 x 40mm
Leveler
Button cap screw M8 x25mm
HARDWARE
120 deg
120 deg
120 deg
NEED A LEVELER NEED A LEVELER
*POWER TOOL, ALLEN KEY & LEVELER ARE NOT INCLUDED
JCBC Screw

MAX HYBRID INSTALLATION
2
FRAME (RECTANGULAR)
*Fix 2x csk M6x45 screws to connect hybrid main prole
to the hybrid aluminium leg.
*Hook on hybrid system frame to hybrid aluminium leg.

MAX HYBRID INSTALLATION
3
*Complete look for MAX HYBRID RECTANGULAR frame.
NEED A LEVELER

MAX HYBRID INSTALLATION
4
a
b
c
FRAME (WING)
*Complete look for MAX HYBRID WING frame.
NEED A LEVELER

MAX HYBRID INSTALLATION
5
ADJUSTABILITY (HI-TECH)
NEED A LEVELER
Add in the
plug from
outside.
Prevent compensator
rotate backward.

MAX HYBRID INSTALLATION
6
ADJUSTABILITY (E-DRIVE)

MAX HYBRID INSTALLATION
7
d
BACK
Slot in to the
groove
ab
c
BACK
Tension steel wire rope
and slot in top support
to aluminium prole
Push this over

MAX HYBRID INSTALLATION
8
*Add in cable gutter from top. *Slot in X beam.
CABLE GUTTER & X BEAM INSTALLATION

MAX HYBRID INSTALLATION
9
OPTIONAL (Media Space)
*Add in media space from top. *Slot in X beam.

MAX HYBRID INSTALLATION
10
WING (ONLY E-DRIVE)

MAX HYBRID INSTALLATION
11
*Add in the shbone.
*Add in the cable gutter.
a.
b.
Place on top.
Slot in.

MAX HYBRID INSTALLATION
12
*Add in the shbone.
*Add in the media space.
OPTIONAL (Media Space)
b. Slot in.
a. Place on top.

MAX HYBRID INSTALLATION
13
ELBOW
*Turn and hook on elbow
top adapter.
a.
b.
*Slot in elbow bottom adapter
to hybrid system frame.

MAX HYBRID INSTALLATION
14
SCREEN
*Magnet cover stick to
the system

MAX HYBRID INSTALLATION
15
TABLE TOP (RECTANGULAR)
TABLE TOP (WING)
ba
a
b
a
b
a
b
cc
dd
a
JCBC Screw
b
JCBC Screw
a
JCBC Screw
b
JCBC Screw

MAX HYBRID INSTALLATION
16
TOP LID (RECTANGULAR)
TOP LID (WING)
a.
b.
a.
b.
c.
d.

MAX HYBRID INSTALLATION
17
ACCESORIES (MONITOR ARM INSTALLATION)
STEP 1: Raise table top to highest position.
STEP 2: Remove the knock out hole.
STEP 3: Install in the monitor arm. STEP 4: Tighten from underneath.