Markant Matrix Click User manual

Matrix Click
Manual

23
1 Preface
1.1 Support
2 Safety Information
3Supplied goods
4 Assembly
4.1 Suggested installation
4.2 Suggested installation
5Operation
5.1 Performing a Position Reset Prodedure
5.2 Basic functions
5.3 Extended functions
5.4 Additional function of the memory manual switch
5.4.1 Saving a memory position
5.4.2 Adjusting the table to a memory position
5.4.3 Changing the height display (cm/inch)
5.5 System information
5.6 Troubleshooting
6Factory reset
7 Service functions
7.1 Safety
8Cleaning
9Disposal
10 Fehler Codes DM-System / From FW0.2.3
ContentsAssembly instruction
Variant 1
Assembly with power supply
central in the top frame.
Variant 2
Assembly with power outside of
the top frame.
4
4
5
6
8
12
13
16
16
17
18
18
18
18
19
20
20
20
21
22
22
23
24

45
1 Preface
1.1 Support
Dear customer,
In choosing a Matrix Click model, you have decided to acquire a technically advanced table support
system with electric adjustment. Your Matrix Click has been manufactured in house with the utmost care and
precision and has passed numerous quality and safety checks to ensure troublefree and safe operation.
You can signicantly contribute your long-term satisfaction with your Matrix Click model.
If you have technical problems, please contact our support:
T [phone]
E info@markantoce.com
W markantoce.com
2 Safety Information
These safety warnings are important and must be complied with!
The inappropriate operation of the system can put people and property at risk!
Attention
Important Safety Information:
1. Assembly and operation of the Matrix Click model must be in accordance with these assembly instructions
otherwise there is a risk of injury!
2. The table support is solely intended to serve the purpose of ergonomic adjustments for your desk in
accordancewith the weights and measurements given in these instructions. Any usage other than
that mentioned above is inappropriate; the manufacturer disclaims liability for any resulting damages.
In such cases all risk is carried by the user.
3. Please also take into account the general legal and other regulations and legal provisions that are
applicable including those that apply in the operator‘s country as well as the applicable environmental
protection regulations. The regulations of trade associations or other supervisory authorities that are in
force locally must always be observed!
4. The manufacturer cannot be held responsible for any losses or dama ge resulting from unauthorized
modications of the Matrix Click. The power supply is to be used exclusively for Markant guide
columns!
5. Store the assembly and operation Instructions close to the device.
6. This appliance can be used by children aged from 14 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision. Do not leave children nattended with the table support. Children cannot estimate the
danger of the force that the table support has.
7. To avoid any danger of jamming or crushing it is necessary to keep a minimum distance of 25mm to the
moving parts.
8. The assembly site should be dry, dust-free and without direct sunlight. Make sure that no liquid enters the
column unit or power supply as this could cause electrical shock or short circuit!
9. The duty cycle of the system is set to 2 minutes “ON” and 18 minutes “OFF” or 0.5 minutes “ON” and 9
minutes “OFF”. Power cables must not be pinched, bent, stretched or mechanically stressed!
10. The socket for connection with the mains must be installed by a licensed electrician in order to avoid any
hazard to persons or objects.
11. Load limits must not be exceeded.
12. Never open the housing of the power supply! Danger to the user can arise and the guarantee claim will
expire as a result of unauthorized opening of the housing and improper repairs. Only the manufacturer’s
service technicians are authorized to open or repair the electrical equipment!
13. In the event of a malfunction for example smoke, odors, unusual noises, or visible external damage switch
o the system. Disconnect at the mains!

67
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
14
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
Paket / Package / Balík / Zestaw 2 Typ / Type
Touch Unterbauhandschalter Auf/Ab manual
switch/ Dotykový ruční spínač nahoru / dolů
Ręczny przełącznik dotykowy góra / dół do wbu-
dowania
1Stk. / 1pcs. / 1 ks / 1 szt.
optional
volitelný
opcjonalny
Touch Unterbau-Handschalter Memory/ manual
switch memory/ Dotykový ruční spínač Paměť/
Ręczny przełącznik dotykowy Pamięć
1Stk. / 1pcs. / 1 ks / 1 szt.
Netzkabel/ power cord/ Síťový kabel/ Kabel
zasilania sieciowego
1Stk. / 1pcs. / 1 ks / 1 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 60
12Stk. / 12pcs. / 12 ks / 12 szt.
Halbrundschraube/button-head screw/ Šroub s
půlkulatou hlavou/ Śruba z łbem półokrągłym
ø5 x 25
28Stk. / 28pcs. / 28 ks / 28 szt.
Zylinderschraube mit Innensechskant
cylinder screw with hexagon socket
Šroub v válcovou hlavou s vnitřním šestihranem
Śruba z łbem walcowym z gniazdem sześciokątnym
M8 x 16
8Stk. / 8pcs. / 8 ks / 8 szt.
Halbrundschraube /
button-head screw
Šroub s půlkulatou hlavou
Śruba z łbem półokrągłym ø4 x 16
6Stk. / 6pcs. / 6 ks / 6 szt.
Befestigungsschelle /
mounting clamp
Příchytka / Obejma mocująca
4Stk. / 4pcs. / 4 ks / 4 szt.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.
3 Supplied goods
Package Type
Column, 2 pcs.
Top support, 2 pcs.
Foot, 2 pcs.
Optional
Foot, 2 pcs.
Leveler glide, 4 pcs.
Package Type
Ab manual switch, 1 Pcs.
Optional
Manual switch memory, 1 Pcs.
Power cord, 1 Pcs.
Button-head screw, 12 Pcs.
Ø 5 x 60
Button-head screw, 28 Pcs.
Ø 5 x 25
Cylinder screw with hexagon socket, 8 Pcs.
M8 x 16
Button-head screw, 6 Pcs.
Ø 4 x 16
Mounting clamp, 4 Pcs.
Package Type
Adjusment-U, 1 pcs.
Tube frame, 2 pcs.
Power supply, 1 pcs.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.
13
Lieferumfang / Supplied goods / Rozsah dodávky / Zakres dostawy
3 Lieferumfang / Supplied goods / Rozsah dodávky / Zakres
dostawy
Paket / Package / Balík / Zestaw 1 Typ / Type
Säule / column
/ Sloupek / Kolumna
LifeUP Pro TM Q70/3
2Stk. / 2pcs. / 2 ks / 2 szt.
Plattenträger/top support/Nosič desky/ Wspornik
blatu
2Stk. / 2pcs. / 2 ks / 2 szt.
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Optional
volitelný
opcjonalny
Fußausleger / foot / Patka / Stopa
2Stk. / 2pcs. / 2 ks / 2 szt.
Höhenversteller/ leveler glide/ Nastavení výšky/
Regulacja wysokości
4Stk. / 4pcs. / 4 ks / 4 szt.
Paket / Package / Balík / Zestaw 2 Typ / Type
Verstell-U/adjustment-U/ Nastavovací jednotka/
Regulacja-U
1Stk. / 1pcs. / 1 ks / 1 szt.
Plattenrahmen/ tube frame/ Deskový rám/ Rama
blatu 1200-1800
2Stk. / 2pcs. / 2 ks / 2 szt.
Netzteil/ power supply/ Síťová část/ Zasilacz
sieciowy 240W EU
1Stk. / 1pcs. / 1 ks / 1 szt.

89
4 Assembly
==
1200/1400/1600/1800mm
50,5mm
1.
2.
1
2ø5 x 25
16x
==
1200/1400/1600/1800mm
50,5mm
1.
2.
1
2
ø5 x 25
16x
When using a table top with a thickness of less than 25 mm thread inserts and matching screws
need to be mounted.
Attention
min. 20mm
max. 800mm
==
3
4
ø5 x 25
16x

10 11
Engage the column firmly
with momentum.
5
6
Click into place
7
8M8 x16
8x
max. 12Nm
4x

12 13
17,3 mm
egdEediS
Front Edge
50 mm
9
ø5 x25
2x
ø4 x16
2x
59,9 mm
43,8 mm
Assembly with power supply central of the top frame
4.1 Suggested installation
4.2 Suggested installation
Variant 1
O
ptional
46 mm
59,65 mm
24,73mm
Side Edge
Front Edge
137,25 mm
9
ø5 x 25
2x
ø4 x16
2x
Assembly with power supply outside of the top frame
Variant 2
17,3 mm
egdEediS
Front Edge
50 mm
9ø5 x25
2x
ø4 x16
2x
59,9 mm
43,8 mm

14 15
10
11
ø5 x 60
12x
Please ensure that the screws do not damage internal cables.
Attention
ø4 x 16
1x
ø4 x 16
4x
4x
1x
12
13
Variant 2
Variant 1

16 17
5 Operation / 5.1 Performing a Position Reset Procedure
Risk of minor or moderate injury through crushing
Collision Detection (ISP) is inactive during start-up and reset processes.
This may lead to minor or moderate injury through crushing.
Ensure that no persons or objects are in the table‘s range of motion.
When in use for the rst time, wait 10 seconds a.er plugging in the Power cord to reset the table.
The green LED lights up quickly to show the table can be resetted.
Attention
Notice
Notice
Before using the Matrix Click System a Postion Reset Procedure must be carried out.
You do this as follows:
›Press and hold the DOWN Key until the table stops at the lower position limit
›Release the DOWN Key
›Press and hold the DOWN Key again
The table will move down slightly, then up again
›Release the DOWN Key
The Position Reset Procedure is complete
5.2 Basic functions
1 2
4 3 5 1
2
1234
SAVE
1 UP button
2 DOWN button
3 Memory Position Keys
4 SAVE Key
5 Display
Table top up
›Press the UP button on the hand switch.
›Keep the button pressed until the desired table top height is reached.
Table top down
›Press the DOWN button on the hand switch.
›Keep the button pressed until the desired table top height is reached.
The table top moves up or down until you release the button or until the maximum or minimum
height of the table top is reached.
The hand switch shouldn’t be assembled underneath or in direct proximity to metal parts.
Notice
Notice
Notice
If your Matrix Click system has been parameterized with additional stopping points
(e.g. a Safety Area or Container Stop Position), repeat Step 3 until the table has
moved upwards again.
The hand switch was tested for interference immunity against high frequent electromagnetic
elds according to EC default standard EN 61000-6-2:2005. To ensure an interference-free
operation all electrical appliances in the surrounding area must comply with the test standard
EN55014.

18 19
5.3 Extended functions
5.4.1 Saving a memory position
5.4.2 Adjusting the table to a memory position
Container-Stop on
and o
(only possible in
lower half of stroke)
Shelf stop on
and o
(only possible in
upper half of stroke)
Move the table to the desired position.
Then press UP/DOWN button simultaneously for 10 sec.
Container-Stop is now active.
Move the table to the desired position.
Then press UP/DOWN button simultaneously for 10 sec.
Shelf-Stop is now active.
›Move the table to the desired height ,
The display shows the Table Top height
›Press the SAVE Key
›Press the Memory Position Key , ,
The display shows S 2
Afer about two seconds, the Table Top height is displayed again
›Press and hold the required Memory Position Key (e.g. 2) ,
The Table Top will move until the saved Table Top height has been reached
If you release the Key before the Memory Position is reached, the table will stop
›Release the Memory Position Key
Release the Memory Position Key
5.4.3 Changing the height display (cm/inch)
DMUI-HSU Handsets can display the height of the Table Top in both centimeters and inches.
To change the displayed unit of measurement:
›Press and hold Memory Position Keys 1 and 2, alongside the UP Key ,
The display shows S and a number, e.g. S 7
›Press the UP Key or DOWN Key until the display shows S 5 ,
The display shows S 5
›Press the SAVE Key
If the display was previously set to cm, it is now set to inches
If the display was previously set to inches, it is now set to cm

20 21
5.5 System Information
Signal Message Required Actions
No Light System operating normally
System not connected
Operate the Matrix Click System as normal.
See conguration on page 13, picture 9.
Red Light
Blinking
System Error Warning Release all keys and wait for 5 seconds. Then, try to repeat
the action again. Disconnect all components from the
PowerHub. Disconnect the Power Hub from the Mains.
Check the Power Hub for overheating. Let cool if necessary.
Check all connections and reconnect the system.
If problem persists: Perform a Position Reset Procedure
(Chapter 5.1). Contact Markant.
Green Light
Blinking
System Start-up
Reset in Progress
Duty Cycle Exceeded
Wait until the LED has stopped blinking to continue.
Do not press any buttons.
Remove the obstruction from the Table System. Remove
unnecessary loads from the Table Top Operate the Matrix
Click System as normal.
Green Light
ashing
Rapidly
Position Reset Required. Performing a Position Reset Procedure.
Do not operate the Matrix Click system if problems persist. Contact Markant
for further information.
Notice
5.6 Troubleshooting
6 Factory reset
Problem Possible cause Solution
The table
does not
move
The system is not plugged in.
The Actuator is not connected
properly.
Poor plug connection.
The Actuator is defective.
The hand switch is defective.
Ensure that the system has been connected to the Power
Hub correctly.
Ensure that the Actuator is properly connected to all
components of the system.
Ensure that all plugs have been connected properly.
Contact Markant.
Contact Markant.
The table
only moves
slowly down-
wards
There was power failure
while the table was in motion.
The Power Hub was disconnected
while the device was in motion.
Reset required.
The Actuator is defective.
Perform a Position Reset Procedure (see Chapter 5.1
Performing a Position Reset Procedure) .
Contact Markant.
The hand
switch does
not work
The hand switch is defective. Contact Markant.
To reset the Matrix Click System to its Factory Settings with a Basic Handset:
›Press the UP and DOWN button simultaneously, then release
›Press and hold the UP and DOWN button for 10 sec
The LED will light up in Red
›When the LED light begins to blink, release the UP and DOWN button
›The Matrix Click system has now been reset to its factory settings

22 23
7 Service functions / 7.1 Safety
8 Cleaning
9 Disposal
Crushing and shearing hazard!
When restoring the control system to the factory settings and when resetting,
the collision protection ISP [Intelligent System Protection] is inactive.
›Make sure that no objects or persons are in the danger zone (safety
distance > 25 mm) and that they do not reach into the danger zone
Property damage due to improper cleaning.
›Do not use solvents or abrasives
›Use only dry, so. cloths for cleaning
Attention
Attention
›Always keep the handset and plug connectors free of dust deposits!
›Clean the control system and handset with a dry, soft cloth
Environmental damage due to improper disposal.
›Proper disposal serves as environmental protection and prevents possible
harmful eects to humans and the environment
Notice
Information on the disposal of electrical and electronic equipment in the European Union:
Within the European Union, the disposal of electrically operated equipment is
governed by national regulations based on the EU Directive 2012/19/EU on
Waste Electrical and Electronic Equipment (WEEE). In accordance with this,
the device must no longer be disposed of with municipal waste or household
waste. The device is accepted free of charge at municipal collection points or
recycling centers. Product packing consists largely of recyclable materials.
Dispose of it in an environmentally friendly manner and bring it in for recycling.

Nr. Type DMUI-TOUCH-B DMUI-
TOUCH-C
Name Trigger FW Reaction Required Actions (to satisfy FW)
0 Error RED_BLINK_SLOW_CONT Invalid Never (would be a bug)
1 Error RED_BLINK_SLOW_CONT “Err”/No FW Assert Firmware runs into critical situation, operation cannot continue (might be
combined with No. 21)
Hard Stop Power Cycle
2 Error RED_BLINK_SLOW_CONT “Err”/No Motor Over Current (RESERVED – NOT YET IMPLEMENTED) Motor current overshoot maximal
(parameterized) current.
Hard Stop Release Button, try again
3 Error RED_BLINK_SLOW_CONT “Err”/No DC Over Voltage DC voltage exceeds limit Deceleration Release Button, try again
4 Error RED_BLINK_SLOW_CONT “Err”/”Con” LIN Communication Communication timeouts, Checksum/communication errors, short circuit on the
communication bus
Hard Stop Release Button, try again
Power Cycle
5 Busy GREEN_BLINK_SLOW_CONT “ISP” ISP (Collision) Strain gauge sensor or motor current evaluation signaled a collision event Hard Stop + Drive Back Release Button, try again
7 Busy GREEN_BLINK_SLOW_CONT “hot” Power Supply
Overtemperature
Power supply voltage deceeds parameterized limit (self-protection feature
of DMPx)
Active movement can be
nished, new driving cycle
blocked
Cool down power supply (voltage has to be
above overtemperature limit), try again
8 Busy RED_BLINK_SLOW_CONT “Err”/No Impulse Detection
Timeout
No position feedback (impulses) within a congured time. Hard Stop Reference movement
9 Busy GREEN_BLINK_SLOW_CONT “hot” Driving Duty Cycle Operating time (movement) exceeds parameterized limit Active movement can be
nished, new driving cycle
blocked
Wait parameterized time, try again
10 Busy GREEN_BLINK_SLOW_CONT “hot” MCD
Overtemperature
MCD temperature sensor or μC temperature sensor overshoots parameterized
temperature limits
Deceleration, new driving
cycle blocked
Cool down electronic, try again
11 Error RED_BLINK_SLOW_CONT “Err”/No Cannot Follow
(Movement)
Desired speed/acceleration cannot be achieved. Hard Stop Release Button, try again
12 Error RED_BLINK_SLOW_CONT “Err”/No Power Stage
Overcurrent
MOSFET current(s) exceed congured limits. Hard Stop Release Button, try again
13 Error RED_BLINK_SLOW_CONT “Err”/No DC Under Voltage DC voltage deceeds minimal required operating voltage for the microcontroller Hard Stop (Fault cannot be
stored in memory)
Release Button, try again
14 Error RED_BLINK_SLOW_CONT “Err”/No Out Of Sync Position of actuators is out of sync Hard Stop Release Button, try again
15 Error RED_BLINK_SLOW_CONT “Err”/No Strain Gauge Strain gauge signal saturates: broken sensor or wires Deceleration, Not starting Release Button, try again
17 Error RED_BLINK_SLOW_CONT “Err”/No Compound Error Something went wrong during wedding sequence, bus communication errors,
faulty actuators, network conguration not consistent, network not working
Cannot happen during
movement
Power Cycle and/or S0
18 Error RED_BLINK_SLOW_CONT “Err”/No Nodes Incompatible
(Wedding Sequence)
Parameterization and/or mware version of drives within a compound are
not compatible
Cannot happen during
movement
Compatible parameterization and/or rm-
ware and/or S0
19 Error RED_BLINK_SLOW_CONT “Err”/No Wrong Number of
Drives
Desired number of drives (according parameter) does not match with
number of drives within the setup
Cannot happen during
movement
Number of drives in the setup has to match
with desired/parameterized number of
drives options
20 Error RED_BLINK_SLOW_CONT “Err”/No Motor short circuit
and/or open load
Short circuit and/or open load detection of the microcontroller-internal
detection mechanism triggered (short circuit or open load on at least one of
the 3 phases of the motor)
Movement cannot be
initiated
No short circuit nor open load on the three
phases of the motor
21 Error RED_BLINK_SLOW_CONT “Err”/No Critical rmware
condition (safe-state)
A critical condition prevents correct rmware execution (watchdog, task
runtime error)
Hard Stop Power Cycle
22 Error RED_BLINK_SLOW_CONT “Err”/No Powersupply
overload
Power supply overload was detected (DMSystem voltage drop mechanism) Hard Stop Release Button, try again
23 Error RED_BLINK_SLOW_CONT “Err”/No Motor Under Voltage Supply voltage level is too low (according parameter) for driving the
motor.
Hard Stop (or movement
won’t start)
Supply voltage has to be above limit, release
button, try again
10 Fehlder Codes DM-System