Markant Matrix Pro Wing User manual

Matrix Pro Wing installation manual
(MyScreen)
TOOLS & MANPOWER
Manpower x2 Power Tool x2 Allen Key x2
MAIN COMPONENTS
Component A (x3) Component B (x3) Component C (x3) Component D (x3)
A
BC
D
Component E (x3)
E
Component F (x3)

A
B
*bridge
C
E
1
3
5
Pull out the fabric screen to get access to the inside part. Attach
the screen by using (E) screw and tighten it using Allen key.
Repeat this step 2x.
D
The screen installation is completed.
6
E
*hold this to open the
fabric screen.
2
4
Slot C inside the hole of the pole with a (E) screw and tighten it
using Allen key. Repeat this step for the other 2.
Attach B on top of the bridge and slot in A to tighten and secure
its position. Repeat it 2x.
5
Attach the top part of the screen by using (F) screw and tighten it
using Allen key. Repeat this step 2x on the other 2 screen.
Cover back the power pole lid and the metal cap afterward.
F
4
Take out the metal cap from
the power pole.
Slide up the lid to get access
inside the pole.
*slide up the lid
*metal cap