Markant MATRIX PRO User manual

Matrix Pro Single
Manual
[1003]_MAI_[Matrix Pro Single]
*leveler
*leveler
A
B
C
D

markantoce.com 2
MAIN COMPONENTS
TOOLS & MANPOWER
Manpower x2 OPTION 1: Power Tool x2 OPTION 2: Allen Key x2 Leveler
Frame
1
A
*leveler
*leveler
A
B
C
D
B C D E
Component A (x2) Component B (x1) Component C (x8)
M6 x 15 screw
Component D (x2) Component E (x2)
JCH Screw
*only for table top

*pre-installed screw
1200 table frame: Hole (2) must match to the second hole before
tightening the screw.
*1400 table frame
*1200 table frame
1400 table frame
tightening the screw.
B
A
B
C
D
B
The frame (B) is pre-assembled. Do not remove the carton box
until the leg is ip up. This is to prevent any further damages.
Raise the legs, slide the frame outwards to t desired size and x
it with the screw that are already pre-mounted in the frame.
Attach D to B and tighten it with screw (C) using Allen key.
Repeat this step on the other side of the leg.
Attach A to B and secure the screw using Allen key.
Repeat this step on the other side of the leg.
Adjust the table length and secure the pre-installed screw using
Allen key.
The installation is completed.
B
carton block carton block
1 2
3 4
56
A

markantoce.com 4
Table Top
2
Attach table top on the frame and secure it using (E) screw.
The installation of the table top is completed.
E

markantoce.com 5
MAIN COMPONENTS
TOOLS & MANPOWER
(C) Monitor Arm
Accesories
3
E
B
A
C
D
A B C D E
(A) Handset (B) Media Hub (D) Front Gutter (E) Multi Drawer
Manpower x1 Power Tool x1 Allen Key x5

Attach (A) Handset below the table top using a screw. The installation for (A) Handset is completed.
Attach (B) Media Hub on the table top.
Tighten the screw on top of (B) Media Hub. The installation for
Media Hub is completed.
1 2
34
AA
B
B
*screw
*screw

*bottom part Multi Drawer
E
*top part Multi Drawer
E
D
D
*tighten screw
Attach (C) Monitor Arm on the table top.
Tighten the screw at the bottom. The installation for (C) Monitor
Arm is completed.
Attach (D) Front Gutter below the table top using screw.
Attach the top part of (E) Muli Drawer below the table top using
screw.
Slot in the bottom part of the (E) Multi Drawer and the installation
is completed.
2
4
56
3
1
The installation for (D) Front Gutter is completed.

markantoce.com 8
MAIN COMPONENTS
TOOLS & MANPOWER
Control Box
4
Manpower x1 Power Tool x1 Allen Key x5
A B
A
B
Please refer handset manual
instruction that is provided.
[A] Control Box [B] Power Plug
Self Tap Screw

markantoce.com 9
Umbilical Cord
ABC
DE
STEP 1: Attach (C) control box below the table top using self-tap screw.
STEP 2: Plug in the main plug to the power extension inside the trunk towards the power extension inside the front gutter.
(E) Wall Socket
(D) Power Extension(C) Control Box
(B) Actuator(A) Handset

markantoce.com 10
Umbilical Cord
Cable line from (D) control box to the (A) handset.
Cable line from the (D) control box to the (B) actuator.
Cable line from the (C) power extension inside the
front gutter to the Media Hub.
1
2
3
Cable line from the (C) power extension inside the
front gutter to the monitor arm.
Cable line from the (E) wall socket go through the
umbilical cord towards the (C) power extension
inside the front gutter.
Cable line from the (C) power extension inside the
front gutter to the (D) control box.
4
5
6
1 2 3
4 5 6
STEP 3: Attach the cable point to the rest of the accesories.
STEP 4: Reset procedure to follow before use: Hold up- and down button until desk is in lowest
position and then slightly goes up.
Please refer to the handset
manual.
(E) Wall Socket
(D) Power Extension(C) Control Box
(B) Actuator(A) Handset

markantoce.com 11
Recycleable Guideline
6
NO. ITEMS QTY MATERIAL WEIGHT (g) / pc RECYCLABLE/
NON-RECYCLABLE
1 1 Metal 20302.64 RECYCLABLE
2 2 Metal 861.36 RECYCLABLE
3
5
7
6
1 Metal 1211.84 RECYCLABLE
4
*detach the
adjustable feet
*detach rubber
All components are easy to dismantle and recycle. Undo the step of all installation for recycleable or reuse purposes.
3XXX 50
(WEEE) WASTE ELECRICAL
&
ELECTRONIC EQUIPMENT
XXX 10 RECYCLABLE
XXX 10 RECYCLABLE
XXX 10 RECYCLABLE
8
2
2