Mastercare Master Comfort MC 001-8040 User manual

The Original Nordic
Human Handling Concept
MC 001-8040
MC 001-8045
MC 001-8035
MC 001-8050
MC 001-8060
36382
133646
102744
34331
36383
UDI-DI/GTIN
5744001971543
5744001974117
5744001971512
5744001971574
5744001971604
ISO 09 07 06 07
(UK) User Manual
39_20221123_UK
Top Class Positioning Wedges and Cushions
Regulation MDR 2017/745 for medical devices class 1
Article no. Name - Size
HMI no.
Master Comfort
Positioning Wedges
Master Comfort - Support Wedges
Master Comfort Positioning Wedges - XS
(welded)
Master Comfort Positioning Wedge - S
Master Comfort Positioning Wedge - M
Master Comfort Positioning Wedge - L

Thank you for choosing a product from master care A/S.
We recommend reading the user manual thoroughly before using the
product (-s).
The information in this user manual applies to the shown products
provided that the products have not been modied or customized
and that the products have been used as recommended in this user
manual.
If the costumer changes, repairs or uses the product in other combi-
nations than recommended by master care A/S the CE-approval no
longer applies and the guarantee becomes void.
In case of doubt, contact master care A/S or our distributor in your
area.
MDR (EU) 2017/745:
Products in this user manual are CE-approved and follows the harmo-
nized standards. This means that the products are in compliance with
the essential health and safety directives. The product(-s) comply with
the standards in the Medical Device Regulation MDR (EU) 2017/745 –
Class 1.
The intended use of the product/-s:
The product is used to support and reduce pressure on the tissue while
repositioning a user or when lying in bed. Wedges with anti-slide on
the underside can be used directly on slippery surfaces.
Correct use of the product:
The Master Comfort products can be placed between the user and the
area of support and thereby reduce the pressure on the skin. Alterna-
tively, the products can be used to support the sitting position or when
lying on the side to prevent falling forward or backwards.
Warning:
The use of pillows and wedges can’t replace the need of frequent
repositioning and daily skin assessment.
Risk assessment:
Always make a risk assessment and a functional assessment of the
user prior to using the product. This way using the product for trans-
ferring or moving a user, is ergonomic and legally sound.
Knowledge of the product/transferring:
It is important that the user of the product has been properly instruct-
ed in the use of the product and has read the user manual thoroughly
prior to using the product.
master care A/S provide education in the use of products and on our
website all user manuals can be found.
Life span:
The expected life span of the products is 1-5 years depending on the
use, user´s load and how often it is washed and dried.
Products which no longer provide sufcient support, with defect
seams, broken material or other deciencies must be discarded. This
way you will always keep a sound and healthy work environment for
both helper and user.
Make visual inspections frequently and preferably before every use.
Guarantee:
master care A/S provide a 2-year guarantee covering material defects
and manufacturing defects if the product has been used correctly.
Unintended events and injuries when misusing the products:
Unintended events must always be reported to the appropriate Na-
tional Authority and to master care A/S or the distributor in the current
country.
master care A/S and our distributors take no responsibility for per-
sonal injuries or product damages if the product(-s) have been used
in contravention of the by the manufacturer recommended intended
purpose or proper use of the product.
master-care.dk

User Manual - Master Comfort Positioning Wedges
Page 1
Table of Contents
Support stomach when side lying (Passive User, one helper) .................. page 2
Avoid sliding downwards when lying in bed (Passive user, one helper) .................. page 2
30º side lying (passive user, one helper) .................. page 2
Supporting the body in supine lying (Passive user, one helper) .................. page 3
Supporting the head .................. page 3
Minimize tissue injury .................. page 3
Stable Wegdes .................. page 3
Technical Specikations .................. page 4
master-care.dk

User Manual - Master Comfort Positioning Wedges
Page 2
30º side lying (passive user, one helper)
Avoid sliding downwards when lying in bed (Passive user, one helper)
9. Placing of the wedges on top of the turn
sheet makes the position more stable due to the
anti-skid on the wedges. Small adjustments to
the rest of the body can be made to ensure that
the body is comfortably supported.
8. Place Positioning Wedges along the backside
of the body under the Turnsheet to give the
user optimal comfort. Wedges under the Turner
allows the user to move to supine lying inde-
pendently
6. The Positioning Wedges have a Non-Skid
surface on the underside to make them stick to
the Mattress Cover. Elevate the head end of the
bed. You have the perfect position for sitting
in bed without sliding down. For extra comfort
place Wedges along the torso´s sides.
5. Place the Positioning Wedges -XS under the
Turnsheet so that they follow the thigh bones
i.e. from the hollow of the knee to the buttocks
– one on each side. The Wedges are placed
like a ”V” - narrowest at the knees and wider
upwards.
7. The user is lying on a Master Turner or a Light
Turner Turn system. The demented, anxious or
perceptually challenged person can benet from
a Positioning Wedge – S next to the torso. Place
the Wedge before turning. Elevate the Turnsheet
with a hoist.
3. Raise the Turnsheet using the hoist and turn
the user to side lying. The stomach is supported
by the Wedge and keeps the user from rolling
forward. The spine is in alignment.
4. The user is lying on a Master Turner or a Light
Turner. Elevate the knee-bend fully and place
support under the feet from the end of the bed.
A Positioning Wedge - S can be used.
2. The bigger the stomach, the further away from
the body. This way the Wedge always supports
the stomach when the user has turned to side
lying. If the user is very overweight a size M or L
is recommended.
1. The user is lying on a Master Turner or a Light
Turner. Place the chosen Wedge – often size S –
next to the waistline.
Support stomach when side lying (Passive User, one helper)
master-care.dk

User Manual - Master Comfort Positioning Wedges
Page 3
Supporting the head:
Supporting the body in supine lying (Passive user, one helper):
15. All Master Comfort Positioning Wedges have a Non-skid
underside. This way they are easy to place and they stay
in place, even if they are positioned on top of the smooth
Mattress Cover. Because of the soft surface of the Wedges the
Master Turner can slide and move on top of the Wedges. The
Wedges stay in place and give an optimal support if placed
under the Master Turner. The Wedges can also be placed on top
of the Master Turner – depending on the situation.
14. To avoid tissue injuries our Wedges are made
of pressure relieving foam to increase support,
stability, and comfort for the user. The outer side
feels soft and comfortable when pressed against
the body´s pressure points.
12. Place the last Wedges along the user´s legs.
This way the user feels a comfortable and stabile
support all the way down on both sides.
13. Place a Positioning Wedge on each side of
the pillow. This gives the user´s head a stable
and comfortable support. This will distribute the
pressure from the head on to a bigger surface
which lowers the risk of tissue injuries and
increases the comfort for the user when lying in
the bed.
11. Place the Wedges along sides the torso.
Do not force the Wedges under the user. Place
them lightly so the user feels a soft but distinct
support from each side. This way the user can
still move slightly around but feels the support of
the Wedges.
10. The user is lying on a Master Turner or a
Light Turner. Place the choosen Wedges on each
side of the pelvis under the Master Turner to
create a comfortable cradle.
Minimize tissue injury: Stable Wegdes:
master-care.dk

HUMAN HANDLING CONCEPT
We support the Sustainable Development Goals
User Manual - Master Comfort Positioning Wedges
Washing:
The cover of this product can be washed in a
washing machine at max 85 ºC but dis-
infection with alcohol is preferable to prolong
the durability.
Ironing:
Do not iron.
Detergents pH level:
This product tolerates detergents / disinfec-
tants with a pH level between 5-9.
Dry cleaning:
Do not dry clean.
Fabric softener:
Never use fabric softener as this will reduce
the sliding properties signicantly.
Bleach:
Do not bleach.
Dry Tumbling:
This product may only be dry tumbled gently
and at max 40 ºC but airdrying is preferable
to extend the durability
Maintenance:
Make frequent visual inspections to the
non-skid, the incontinence surface, all seams
and the zipper and make sure all are intact
and fully functional before use. Make tactile
inspection to check the pressor absorption
of the foam. Discard the product if it has
deciencies.
Surface cleaning:
The surface of this product can be cleaned
with a wet cloth and soap.
User Manual:
Always read the User Manual thoroughly
before using the product.
Disinfectants:
This product tolerates alcoholic disinfectants
with a pH level between 5-9.
Disposal:
Always make sure to follow local guidelines
when disposing or discarding the product.
For more information, videos
Quick Guide etc., visit
www.master-care.dk
Reservations are made for printing errors.
WARNINGS
IDS/EN ISO 12952-2:2010
Textiles – Assessment of the ignitability of bed-
ding items – Part 2: Ignition source: match-ame
equivalent.
DS/EN ISO 12952-1:2010
Textiles – Assessment of the ignitability of bed-
ding items – Part 1: Ignition source: smouldering
cigarette.
ISO certications:
MC 001-8040 Master Comfort - Support Wedges L 40 x W 15 x H 5 cm
MC 001-8045 Master Comfort Positioning Wedges - XS (welded) L 40 x W 15 x H 5 cm
MC 001-8035 Master Comfort Positioning Wedge - S L 30 x W 25 x H 14 cm
MC 001-8050 Master Comfort Positioning Wedge - M L 43 x W 25 x H 14 cm
MC 001-8060 Master Comfort Positioning Wedge - L L 60 x W 25 x H 14 cm
Size:Article no. - Product Name
Materials:
Cover: Flame retardant, elastic, and waterproof Polyester.
Contents: Viscoelastic foam.
Technical Specikations
Find us on:
Never leave the product
on the oor.
The use of pillows and wedges can’t
replace the need of frequent reposit-
ioning and daily skin assessment.
Make sure that all relevant brakes are
activated before transferring the user.
CE-certication:
This product is CE-approved and
follows the harmonized standards.
This means that the products are in
compliance with the essential health
and safety directives. The product(-s)
comply with the standards in the
Medical Device Regulation (EU)
2017/745 – class 1.
master care A/S, Soenlystvej 3, DK 8340 Malling, Denmark
Tel. [phone], E-mail: [email protected]
master-care.dk