Mastercare MC 001-1680 User manual

The Original Nordic
Human Handling Concept
MC 001-1680
MC 001-1681
MC 001-1682
103158
105469
109009
5744001970508
5744001970515
5744001970522
MC 001-1680 MC 001-1681 MC 001-1682
ISO 12 31 15 03
UDI-DI/GTIN
(UK) User Manual
30_20230317_UK
Regulation MDR 2017/745 for medical devices class 1
Article no. Name - Size
HMI no.
Master Leg
Master Heavy Leg
Master Single Leg
Master Leg Open

Thank you for choosing a product from master care A/S.
We recommend reading the user manual thoroughly before using the
product (-s).
The information in this user manual applies to the shown products
provided that the products have not been modied or customized
and that the products have been used as recommended in this user
manual.
If the costumer changes, repairs or uses the product in other combi-
nations than recommended by master care A/S the CE-approval no
longer applies and the guarantee becomes void.
In case of doubt, contact master care A/S or our distributor in your
area.
MDR (EU) 2017/745:
Products in this user manual are CE-approved and follows the harmo-
nized standards. This means that the products are in compliance with
the essential health and safety directives. The product(-s) comply with
the standards in the Medical Device Regulation MDR (EU) 2017/745 –
Class 1.
The intended use of the product/-s:
Combined with a hoist the purpose of the product is to lift a leg from
a user with decreased muscle strength of the surface. This may be
useful during wound care to prevent static lifting.
Correct use of the product:
Mount the Master Leg on the user´s leg and attach it to the yoke. It is
now possible to mobilize the leg with minimum effort.
Warning:
Make sure that the straps are correctly mounted on the yoke before
lifting the leg from the surface.
The product is only compatible with a yoke with hooks.
Risk assessment:
Always make a risk assessment and a functional assessment of the
user prior to using the product. This way using the product for trans-
ferring or moving a user, is ergonomic and legally sound.
Knowledge of the product/transferring:
It is important that the user of the product has been properly instruct-
ed in the use of the product and has read the user manual thoroughly
prior to using the product.
master care A/S and our distributors provide education in the use of
products and on our website all user manuals can be found.
Life span:
The expected life span of products with nylon sliding material with
daily wear and tear and washing averagely is 2-5 years. The products
life span depends on the use, users load, washing and drying tempera-
tures and how often it is washed and dried.
Make visual inspections frequently and preferably before every use.
Products with insufcient friction reduction, defect seams, broken
material or other deciencies must be discarded. This way you will
always keep a sound and healthy work environment for both helper
and user.
Guarantee:
master care A/S provide a 2-year guarantee covering material defects
and manufacturing defects if the product has been used correctly.
Unintended events and injuries when misusing the products:
Unintended events must always be reported to the appropriate Na-
tional Authority and to master care A/S or the distributor in the current
country.
master care A/S and our distributors take no responsibility for per-
sonal injuries or product damages if the product(-s) have been used
in contravention of the by the manufacturer recommended intended
master-care.dk

User Manual - Master Leg
Page 1
Table of Contents
Lifting the leg side lying: ....................................................................... page 2
Use the Master Leg when mobilizing/ training the leg:................................................ page 2
Master Heavy Leg: ............................................................................ page 3
Master Leg Open - sitting pivot transfer: ........................................................... page 3
Technical Specikations ........................................................................ page 4
master-care.dk

User Manual - Master Leg
Page 2
Use the Master Leg when mobilizing/ training the leg:
5. Turn the user to side lying position and elevate
the leg. To stabilize the position use a Position-
ing Wedge - S and a Back Wedge.
6. Master Leg can be used for mobilizing and
training users with reduced function of the leg.
3. Pull out the folded part.
4. Close the hook and loop tape around the uses
leg.
2. Rotate the user´s leg and push the Master Leg
into the mattress and under the leg.
1. Fit while lying supine. Fold half of the Master
Leg with the straps facing downwards.
Lifting the leg side lying:
master-care.dk

User Manual - Master Leg
Page 3
Master Leg Open - sitting pivot transfer:
Master Heavy Leg:
12. A Mini Master and a Sliding Board can with
an advantage be used during the transfer to/from
the bed.
11. A bit of space is needded between the user´s
legs. Place a Roto Master under the user´s feet.
9. The leg can be mobilized to give room for e.g.,
perineal care.
10. Fit the Master Leg Open around the user´s
lower legs.
8. Connect the straps to get the wanted knee
bend.
7. Fit Master Heavy Leg around both thigh and
lower leg.
master-care.dk

HUMAN HANDLING CONCEPT
We support the Sustainable Development Goals
User Manual - Produktnavn
User Weight:
Recommended max. user weight: 150-200 kg.
Ironing:
Do not iron.
Max.
60 C
o
Washing:
This product can be washed in a washing
machine at max. 60 ºC.
Gentle washing and dry tumbling signicantly
prolongs the durability.
Dry cleaning:
Do not dry clean.
Detergents pH level:
This product tolerates detergents / disinfec-
tants with a pH level between 5-9.
Bleach:
Do not bleach.
Fabric softener:
Never use fabric softener as this will reduce
the sliding properties signicantly.
Maintenance:
Make visual inspections frequently and
preferably before every use. Pay attention to
torn fabric, seams and straps. Products with
high friction or other deciencies must be
discarded.
Dry Tumbling:
This product may only be dry tumbled gently
and at max. 40 ºC.
Airdrying prolongs the durability signicantly.
User Manual:
Always read the User Manual thoroughly
before using the product.
Surface cleaning:
The surface of this product can be cleaned
with a wet cloth and soap.
Disposal:
Always make sure to follow local guidelines
when disposing or discarding the product.
Disinfectants:
This product tolerates alcoholic disinfectants
with a pH level between 5-9.
For more information, videos
Quick Guide etc., visit
www.master-care.dk
Reservations are made for printing errors.
WARNINGS
ISO 12952-1:2015
Textiles – Assessing the ignitability of all bedding
items, when subject to a smouldering cigarette.
ISO certications:
MC 001-1680 Master Master Heavy Leg L 60 x W 35 cm 12 200 kg
MC 001-1681 Master Single Leg L 60 x W 35 cm 6 150 kg
MC 001-1682 Master Leg Open L 100 x W 22 cm 2 150 kg
Max. User Weight:
Handles:
Size:Article no. - Product Name:
Materials:
Polyester, bomuld, Nylon.
Technical Specikations
Find us on:
Never leave the user on
the product when lying on the
edge of the bed.
Never leave the product
on the oor.
Always make sure that the
user is not caught in the straps.
Never leave the user lying on the
product whilst connected to a hoist.
Do not use as a sling sheet. Can
be combined with a hoist for e.g.
repositioning in bed.
Make sure that all relevant brakes
are activated before transferring
the user.
CE-certication:
This product is CE-approved and
follows the harmonized standards.
This means that the products are
in compliance with the essential
health and safety directives.
The product(-s) comply with the
standards in the Medical Device
Regulation (EU) 2017/745 – class 1.
master care A/S, Soenlystvej 3, DK 8340 Malling, Denmark
Tel. [phone], E-mail: [email protected]
master-care.dk