Matatakitoyo Torque Tools APS-12N User manual

Insert square drive securely to the socket.
1. Study this instruction before use.
2. This torque wrench as calibrated and tested before leaving the factory is certified to meet the current standard specification and has
an accuracy of ±4%.
3. THIS TOOL IS A PRECISION MEASUREMENT AND DESIGNED FOR MANUAL TIGHTENING FASTERNERS ONLY.
DO NOT USE IT AS A NUT BREAKER OR FOR ANY OTHER PURPOSE.
4. Over torque will cause tool damage and personal injury.
5. Do not use this tool near rotating machinery.
6. Disassemble this tool or make any adjustments will result of losing accuracy and void the warranty.
7. Do not continuously apply force after hear click or feel shock.
8. Do not use any format of extension on the handle of the tool. This will not only damage the tool, also affect the accuracy.
9. Do not immerse grease inside ratchet head. It may cause unexpected damage.
10. Use special care at minimum torque setting.
11. Please wear gloves and goggles when working.
BEFORE STARTING
HOW TO USE CONTENTS
Manual
Supplied in a plastic box.
Torque wrench
Manual
WARNING
Do not continuously apply force after hear click or feel shock.
STOP
CLICK
3/8” 3/4”1/2”1/4” 1”
TORQUE
Position of ratchet lever for clockwise/counter clockwise tightening.
GripTubeRatchet Lever
Choose quality socket
APS
OPERATION MANUAL
Torque Wrench, Pre-Set Type
Models covered

E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer
MAINTENCE AND STORAGE
L
ØD
WH
A
Metric SAE
ITEM NO. Range ITEM NO. Range
W
APS-12N
APS-50N
APS-100N
APS-200N
APS-300N
APS-500N
APS-800N
APS-1200N
APS-1500N
24.0
28.6
37.0
46.0
46.8
64.0
64.0
65.8
79.7
79.7
H
18.0
23.5
27.7
33.0
33.2
54.1
54.1
57.0
66.8
66.8
L
170
300
350
500
540
560
930
997
1729
ØD
27.4
37.3
37.3
37.3
37.3
37.3
37.3
37.3
37.3
2-12 Nm
5-50 Nm
20-100 Nm
50-200 Nm
60-300 Nm
100-500 Nm
150-800 Nm
240-1200 Nm
300-1500 Nm
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
0.22
0.56
0.76
1.38
3.60
5.90
6.30
8.90
11.70
KG
AW
APS-120i
APS-40F
APS-80F
APS-150F
APS-230F
APS-400F
APS-600F
APS-800F
APS-1000F
24.0
28.6
37.0
46.0
46.8
64.0
64.0
65.8
79.7
79.7
H
18.0
23.5
27.7
33.0
33.2
54.1
54.1
57.0
66.8
66.8
L
170
300
350
500
540
560
930
997
1729
ØD
27.4
37.3
37.3
37.3
37.3
37.3
37.3
37.3
37.3
20-120 in.lb
4-40 ft.lb
10-80 ft.lb
40-150 ft.lb
60-230 ft.lb
80-400 ft.lb
120-600 ft.lb
150-800 ft.lb
200-1000 ft.lb
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
0.22
0.56
0.76
1.38
3.60
5.90
6.30
8.90
11.70
KG
A
1. If this tool has not been used for a period of time, it shall be preloaded several times to allow internal lubricant to recoat.
2. Clean this tool by wiping with a clean cloth after operation and storage in a dry environment.
Do not dip any type of liquid in this tool. This may damage the internal of this tool.
3. This tool should be recalibrated a period of 12 months, or 5,000 cycles, whichever occurs first.
To contact with local vendor, an authorized repair center for supporting.
1 Years
5000 Times
TORQUE CONVERSION FACTORS
SPECIFICATION
Units to be
converted
1 mN.m
1 cN.m
1 N.m
1 ozf.in
1 lbf.in
1 lbf.ft
1 gf.cm
1 kgf.cm(kp.cm)
1 kgf.m(kp.m)
1
10
1000
7,062
113
1356
0,098
98,07
9807
0,1
1
100
0,706
11,3
135,6
0,01
9,807
980,7
0,001
0,01
1
0,007
0,113
1,356
0,0001
0,098
9,807
0,142
1,416
141,6
1
16
192
0,014
13,89
1389
0,009
0,088
8,851
0,0625
1
12
0,0009
0,868
86,8
0,0007
0,007
0,738
0,005
0,083
1
0,00007
0,072
7,233
10,2
102
10197
72
1152,1
13826
1
1000
100000
0,01
0,102
10,2
0,072
1,152
13,83
0,001
1
100
0,0001
0,001
0,102
0,0007
0,0115
0,138
0,00001
0,01
1
=mN.m =cN.m =N.m =ozf.in =lbf.in =lbf.ft =gf.cm =kgf.cm
(kp.cm)
=kgf.m
(kp.m)
Corresponding unit
Conversion-formula:
Units to be converted × Factor=Corresponding unit
Example: Convert 5 lbf.ft into cN.m
Solution: 5 × 135,6 = 678 cN.m
Unit : mm
Accuracy : ± 4%
MAY 2020
01
Edition