Matatakitoyo Torque Tools FPS-65F User manual

Please stop applying force when hear a CLICK sound.
Keep applying force to an object can cause damage on either torque wrench nor
tightening object.
1. Study this instruction before use.
2. This torque wrench as calibrated and tested before leaving the factory is certified to meet the current standard specification and has
an accuracy of ±4%.
3. THIS TOOL IS A PRECISION MEASUREMENT AND DESIGNED FOR MANUAL TIGHTENING FASTERNERS ONLY.
DO NOT USE IT AS A NUT BREAKER OR FOR ANY OTHER PURPOSE.
4. Over torque will cause tool damage and personal injury.
5. Do not use this tool near rotating machinery.
6. Disassemble this tool or make any adjustments will result of
losing accuracy and void the warranty.
7. Do not continuously apply force after hear click or feel shock.
8. Do not use any format of extension on the handle of the tool.
This will not only damage the tool, also affect the accuracy.
9. Do not immerse grease inside ratchet head.
It may cause unexpected damage.
10. Use special care at minimum torque setting.
11. Please wear gloves and goggles when working.
BEFORE STARTING
HOW TO USE
CONTENTS
Insert square drive securely to the socket.
1/2”
TORQUE
Manual
WARNING
ManualSupplied in a plastic box.
Torque wrench
Do not continuously apply force after
hear click or feel shock.
STOP
CLICK
Torque value
GripTubeRatchet Head
Choose quality socket
FPS
OPERATION MANUAL
Torque Wrench
Color Coded Pre-Set Type
Models covered

E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer
After all the nuts are installed, use a torque wrench to tighten them one by one in the order of the screws.
4 holes 5 holes
KG
A
FPS-65F
FPS-80F
FPS-100F
FPS-120F
FPS-140F
88 Nm
108 Nm
135 Nm
163 Nm
190 Nm
65 ft.lb
80 ft.lb
100 ft.lb
120 ft.lb
140 ft.lb
1/2”
1/2”
1/2”
1/2”
1/2”
W
43.5
43.5
43.5
43.5
43.5
H
36.5
36.5
36.5
36.5
36.5
L
588
588
588
588
588
ØD
37.3
37.3
37.3
37.3
37.3
1.6
1.6
1.6
1.6
1.6
L
w
ØD
H
A
Yellow
Blue
Gray
White
Light Green
1 1
2
2
3
3
4
4
5
1. If this tool has not been used for a period of time, it shall be preloaded several times to allow internal lubricant to recoat.
2. Clean this tool by wiping with a clean cloth after operation and storage in a dry environment. Do not dip any type of liquid in this tool.
This may damage the internal of this tool.
3. This tool should be recalibrated a period of 12 months, or 5,000 cycles,
whichever occurs first. To contact with local vendor,
an authorized repair center for supporting.
1 Years
5000 Times
MAINTENCE AND STORAGE
TORQUE CONVERSION FACTORS
SPECIFICATION
Unit : mm
Accuracy : ± 4%
ITEM NO. Range Color
Units to be
converted
1 mN.m
1 cN.m
1 N.m
1 ozf.in
1 lbf.in
1 lbf.ft
1 gf.cm
1 kgf.cm(kp.cm)
1 kgf.m(kp.m)
1
10
1000
7.062
113
1356
0.098
98.07
9807
0.1
1
100
0.706
11.3
135.6
0.01
9.807
980.7
0.001
0.01
1
0.007
0.113
1.356
0.0001
0.098
9.807
0.142
1.416
141.6
1
16
192
0.014
13.89
1389
0.009
0.088
8.851
0.0625
1
12
0.0009
0.868
86.8
0.0007
0.007
0.738
0.005
0.083
1
0.00007
0.072
7.233
10.2
102
10197
72
1152.1
13826
1
1000
100000
0.01
0.102
10.2
0.072
1.152
13.83
0.001
1
100
0.0001
0.001
0.102
0.0007
0.0115
0.138
0.00001
0.01
1
=mN.m =cN.m =N.m =ozf.in =lbf.in =lbf.ft =gf.cm =kgf.cm
(kp.cm)
=kgf.m
(kp.m)
Corresponding unit
Conversion-formula :
Units to be converted × Factor = Corresponding unit
Example : Convert 5 lbf.ft into cN.m
Solution : 5 × 135.6 = 678 cN.m
MAY 2020
01
Edition