Matatakitoyo Torque Tools T-25N User manual

Insert square drive securely
to the socket.
1. Balancing wrench in left hand with graduations visible
with the marked arrow Elementary Scale up, unlock
knurled handle by turning lock nut counter-clockwise.
2. Set amount of tarque required by turning knurled handle
to read exact amount on case graduations.
3. Lock handle securely by turning lock nut clockwise .
Tool is ready to use.
For example : ITEM NO. T-210N to set torque to 135 Nm.
1. Turn knurled until the zero graduation on the beveled edge of the
knurled handle is limed up with the vertical mark on the 130 Nm graduation. (See A)
2. Turn hnurled clockeise until the 5 Nm graduation on the beveled edge
of the handle is in line with the vertical line on the case.
Then 130+5=135 Nm(See B)
0
N-m
12
1
210 196
182
154
130
168
140
N-m
53
7
210 196
182
154 168
140
130
1. Position of ratchet lever for clockwise tightening.
2. Install the proper socket or attachment to the square drive and apply
to nut or bolt and pull handle until you feel shock and or hear click.
Release pull and wrench automatically resets for next operation.
Graduation Scale
Hand Force KnobTube
GripMain Scale
Ratchet Lever
HOW TO USECONTENTS
A
1 2 3 B
TORQUE
1/4” 3/8” 3/4”1/2” 1”
N-m
Set Lock
Unlock
BEFORE STARTING
1. Study this instruction before use.
2. This torque wrench as calibrated and tested before leaving the factory is certified to meet
the current standard specification and has an accuracy of ±4%.
3. THIS TOOL IS A PRECISION MEASUREMENT AND DESIGNED FOR MANUAL TIGHTENING FASTERNERS ONLY.
DO NOT USE IT AS A NUT BREAKER OR FOR ANY OTHER PURPOSE.
4. Over torque will cause tool damage and personal injury.
5. Do not use this tool near rotating machinery.
6.
Disassemble this tool or make any adjustments will result of losing accuracy and void the warranty.
7. Do not continuously apply force after hear click or feel shock.
8. Do not use any format of extension on the handle of the tool. This will not only damage
the tool, also affect the accuracy.
9. Do not immerse grease inside ratchet head. It may cause unexpected damage.
10. Use special care at minimum torque setting.
11. Please wear gloves and goggles when working.
Manual
WARNING
Manual
Supplied in
a plastic box.
Torque wrench
leftright
Choose quality socket
T
OPERATION MANUAL
Adjustable Torque Ｗｒｅｎｃｈ
Models covered

Apr. 2020
02
Edition
ØD
Metric
Unit : mm
SAE
Accuracy : ± 4%
# Matt finish # Shinny finish
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1 in.lb
0.5 ft.lb
1 ft.lb
1 ft.lb
2.5 ft.lb
1 ft.lb
2.5 ft.lb
20-200 in.lb
15-80 ft.lb
30-150 ft.lb
50-250 ft.lb
50-300 ft.lb
100-600 ft.lb
100-700 ft.lb
0.56
0.84
1.34
2.38
3.68
5.70
6.00
T-200i
T-80F
T-150F
T-250F
T-300F
T-600F
T-700F
W
28.7
36.5
46.6
47.7
71.6
71.6
71.6
H
29.0
29.0
30.6
38.6
38.6
42.6
42.6
KG
A
ITEM NO. Range ITEM NO. Range
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
0.1 Nm
0.5 Nm
1 Nm
1 Nm
1 Nm
2.5 Nm
3.5 Nm
5-25 Nm
20-110 Nm
42-210 Nm
70-350 Nm
65-450 Nm
140-700 Nm
140-980 Nm
0.56
0.84
1.34
2.38
3.68
5.70
6.00
T-25N
T-110N
T-210N
T-350N
T-450N
T-700N
T-980N
L
280
360
470
630
850
1078
1222
L
280
360
470
630
850
1078
1222
W
28.7
36.5
46.6
47.7
71.6
71.6
71.6
H
20.3
23.6
27.8
33.2
37.1
51.5
51.5
51.5
57.0
20.3
23.6
27.8
33.2
37.1
51.5
51.5
51.5
57.0
29.0
29.0
30.6
38.6
38.6
42.6
42.6
KG
AØD ØD
Your torque wrench was calibrated and tested before leaving the factory and is guaranteed to meet or exceed ISO 6789 and have
an accuracy of ±4%. Because your torque wrench is a precision measuring instrument, it should be serviced only where skilled
parsonnel and special tools and equipment are available.
Do not continuously apply force after hear click or feel shock.
L
H W
N-m
A
Units to be
converted
1 mN.m
1 cN.m
1 N.m
1 ozf.in
1 lbf.in
1 lbf.ft
1 gf.cm
1 kgf.cm(kp.cm)
1 kgf.m(kp.m)
1
10
1000
7.062
113
1356
0.098
98.07
9807
0.1
1
100
0.706
11.3
135.6
0.01
9.807
980.7
0.001
0.01
1
0.007
0.113
1.356
0.0001
0.098
9.807
0.142
1.416
141.6
1
16
192
0.014
13.89
1389
0.009
0.088
8.851
0.0625
1
12
0.0009
0.868
86.8
0.0007
0.007
0.738
0.005
0.083
1
0.00007
0.072
7.233
10.2
102
10197
72
1152.1
13826
1
1000
100000
0.01
0.102
10.2
0.072
1.152
13.83
0.001
1
100
0.0001
0.001
0.102
0.0007
0.0115
0.138
0.00001
0.01
1
=mN.m =cN.m =N.m =ozf.in =lbf.in =lbf.ft =gf.cm =kgf.cm
(kp.cm)
=kgf.m
(kp.m)
Corresponding unit
TORQUE CONVERSION FACTORS
MAINTENCE AND STORAGE
SPECIFICATION
Conversion-formula :
Units to be converted × Factor = Corresponding unit
Example : Convert 5 lbf . ft into cN . m
Solution : 5 × 135,6 = 678 cN . m
1. Please return torque value to just below lowest reading when not in use. Do not turn below lowest reading. (See B)
2. If this tool has not been used for a period of time, it shall be preloaded several times at its
maximum torque setting. This will allow internal lubricant to recoat.
3. Clean this tool by wiping with a clean cloth after operation and storage in a dry environment.
Do not dip any type of liquid in this tool. This may damage the internal of this tool.
4. This tool should be recalibrated a period of 12 months, or 5,000 cycles, whichever occurs first.
To contact with local vendor, an authorized repair center for supporting.
N-m
012 1
210 196
182
154
126
98
70
42
168
140
112
84
56
C
1 Years
5000 Times
STOP
CLICK
E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer