Matatakitoyo Torque Tools INS2 User manual

Insert square drive securely to the socket.
BEFORE STARTING
Main Scale Graduation Scale
KnobGrip Hand ForceTube
Quick Release
Quick release button design.
Push the button to release socket.
PUSH
For example : ITEM NO. INS2-100N
To set torque to 58.5 Nm.
Red line of main scale need to reach 55 Nm (see A)
and adjust graduation scale to 3.5 Nm (see B).
Then 55+3.5=58.5Nm.(see C)
1. Pull the knob to unlocked.
2. Turn the knob clockwise or counter-clockwise
(Right or left) to set the desired torque.
3. Push the knob to set finished.
1 2 3
Unlock
Lock
Set
3/8” 1/2”
TORQUE
1. Study this instruction before use.
2. This torque wrench is calibrated and tested before leaving the factory, it is certified to meet the current standard specification and has
an accuracy of C.W.±4%.
3. THIS TOOL IS A PRECISION MEASUREMENT AND DESIGNED FOR MANUAL TIGHTENING FASTENERS ONLY.
DO NOT USE IT AS A NUT BREAKER OR FOR ANY OTHER PURPOSE.
4. Do not over torquing the fastener, or it will cause tool’s damage and serious injury.
5. Do not use this tool near rotating machinery.
6. Disassemble this tool or make any adjustments will result in the loss of accuracy and invalidating the warranty.
7. Do not continuously apply force after hearing the clicking sound or feel shock.
8. Do not use any kind of extension on the handle of the tool. This will not only damage the tool, also affect the accuracy.
9. Do not immerse grease inside ratchet head. It may cause unexpected damage.
10. Use special care at minimum torque setting.
11. This tool should be visually inspected before use.
12. Please wear gloves and goggles when working.
ManualSupplied in a plastic box.
Torque wrench
CONTENTSHOW TO USE
Manual
WARNING
A B C
35
45
55
65
75
85
30
40
50
60
70
80
35
45
55
65
75
85
30
40
50
60
70
80
3.5 34 4.5 2.5
3.5 34 4.5 2.5
35
45
55
65
75
85
40
50
60
70
80
35
45
55
65
75
85
30
40
50
60
70
80
Choose a qualified
insulated socket
INS2
OPERATION MANUAL
Insulated Torque Wrench, Click Type
Models covered

E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer
SPECIFICATION
TORQUE CONVERSION FACTORS
MAINTENANCE AND STORAGE
ØD2
L
W
H
B
A
ØD
ØD1
Unit : mm
Accuracy : C.W.±4%
ITEM NO. ØD2 Range
INS2-30N
INS2-60N
INS2-100N
INS2-200N
INS2-300N
6~30 Nm
10~60 Nm
20~100 Nm
40~200 Nm
60~300 Nm
0.1 Nm
0.25 Nm
0.25 Nm
1 Nm
2 Nm
3/8”
3/8”
3/8”
1/2”
1/2”
33.5
33.5
35.9
35.9
35.9
ØD1
34.7
34.7
36.5
36.5
36.5
L
299.4
350.6
401.1
447.0
576.0
ØD
30
30
30
32
32
B
11.9
11.9
11.9
13.6
13.6
H
67.0
67.0
67.0
82.1
82.1
W
38.2
38.2
38.2
50.0
50.0
720
850
1050
N / A
N / A
G
A
1. Please return torque value to the lowest reading when not in use.(see D)
Do not turn below the lowest reading.
2. If this tool has not been used for a period of time, it shall be preloaded several times at its
maximum torque setting. This will allow internal lubricant to recoat.
3. Clean this tool by wiping with a clean cloth after operation and storage in a dry environment.
Do not dip any type of liquid in this tool. This may damage the internal of this tool.
4. This tool should be recalibrated a period of 12 months, or 5,000 cycles, whichever occurs first.
To contact with local vendor or an authorized repair center for supporting.
5. This tool should be prevented from excessive heat. For example, heating or steam pipes, as well as UV radiation.
6. This tool should be visually inspected annually, a periodic examination and electrical retesting should be
performed by national regulation or by specifications if necessary.
Do not continuously apply
force after hearing the
clicking sound or feel shock.
12 months
5000 cycles
STOP
CLICK
0 4.50.5 1 4
3.5 34 4.5
2.5
25
35
45
55
65
75
85
20
30
40
50
60
70
80
D
Units to be
converted
1 mN.m
1 cN.m
1 N.m
1 ozf.in
1 lbf.in
1 lbf.ft
1 gf.cm
1 kgf.cm(kp.cm)
1 kgf.m(kp.m)
1
10
1000
7.062
113
1356
0.098
98.07
9807
0.1
1
100
0.706
11.3
135.6
0.01
9.807
980.7
0.001
0.01
1
0.007
0.113
1.356
0.0001
0.098
9.807
0.142
1.416
141.6
1
16
192
0.014
13.89
1389
0.009
0.088
8.851
0.0625
1
12
0.0009
0.868
86.8
0.0007
0.007
0.738
0.005
0.083
1
0.00007
0.072
7.233
10.2
102
10197
72
1152.1
13826
1
1000
100000
0.01
0.102
10.2
0.072
1.152
13.83
0.001
1
100
0.0001
0.001
0.102
0.0007
0.0115
0.138
0.00001
0.01
1
=mN.m =cN.m =N.m =ozf.in =lbf.in =lbf.ft =gf.cm =kgf.cm
(kp.cm)
=kgf.m
(kp.m)
Corresponding unit
Conversion-formula :
Units to be converted × Factor = Corresponding unit
Example : Convert 5 lbf.ft into cN.m
Solution : 5 × 135.6 = 678 cN.m
COMING SOON
COMING SOON
Jun. 2023
03
Version