Matrix Elliptical total body User manual

ELLIPTICAL
TOTAL BODY
OWNER’S MANUAL

1.0 IMPORTANT SAFETY INSTRUCTIONS
Read and save these instructions
Setting up the Elliptical total body
1.1 Installation requirements
1.2 Preventative maintenance and cleaning tips
2.0 USING MANAGER PREFERENCE
2.1 Using manager preference mode
2.2 Selecting US or metric
2.3 Using CSafe
3.0 GETTING STARTED
3.1 Pausing the unit
3.2 Console description
3.3 Manual operation
3.4 Operating programs
3.5 Heart rate control
3.6 Constant watts
4.0 EQUIPMENT SPECIFICATIONS
5.0 ASSEMBLY
5.1 Assembly
1
1
1
1
2
2
3
3
3
4
4
5
5
6
7
7
TABLE OF CONTENTS

READ AND SAVE THESE INSTRUCTIONS
This Elliptical total body is intended for commercial use
To insure your safety and protect the equipment, read all instructions before operating
the MATRIX Elliptical total body.
When using an electrical product, basic precautions should always be followed, including
the following:
DANGER To reduce the risk of electric shock:
Always unplug this equipment from the electrical outlet immediately after using and
before cleaning.
Your MATRIX Elliptical total body is self-generating (requiring no external power source)
and must be pedaled to power up the console.
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons that may
be associated with using this product:
An appliance should never be left unattended when plugged in. Unplug from outlet when
not in use and before putting on or taking off parts.
This product must be used for its intended purpose described in this Owner’s Guide. Do
not use other attachments that are not recommended by the manufacturer. Attachments
may cause injury.
To prevent electrical shock, never drop or insert any object into any opening.
Do not remove the side covers. Service should only be done by an authorized service tech-
nician.
Never operate the Elliptical total body with the air opening blocked, Keep the air open-
ing clean, free of lint, hair and the like.
Never operate product if it has damaged cord or plug, if it is not working properly, if it
has been damaged, or immersed in water. Return the unit to a service center for exami-
nation and repair.
Do not carry this unit by supply cord or used cord as handle.
Keep any power cord away from heated surfaces.
Keep hands and loose clothing away from moving parts.
Close supervision is necessary when Elliptical total body is used by or near children,
invalids, or disabled persons.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Comment this Elliptical total body to a properly grounded outlet only.
CAUTION If you experience chest pain, nausea, dizziness or shortness of breath, STOP
exercising immediately and consult a physician before continuing.
SETTING UP THE ELLIPTICAL TOTAL BODY
Assembly instructions have been provided with your Elliptical total body. For your safety,
please read and follow each of the steps in the assembly guide. To obtain a copy of the
assembly guide, please contact MATRIX FITNESS SYSTEMS or the local authorized deal-
ers.
1.1 INSTALLATION REQUIREMENTS
Your MATRIX Elliptical total body is designed to be self contained and does not require a
power supply to operate.
CAUTION Use of the wrong power supply may cause damage to your Elliptical total body
and/or entertainment device.
Locate a level stable surface to position Elliptical total body. The Elliptical total body has
six leveling feet located under the foot support. If your Elliptical total body wobbles in the
location where you intended to use it, loosen the lock nut on the adjusting foot and adjust
the feet until stable. Once level, lock the adjusting feet by tightening the lock nut to the
frame.
1.2 PREVENTATIVE MAINTENANCE AND CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your MATRIX
Elliptical total body.
Please read and follow these tips.
Position the equipment away from direct sunlight. The intense UV light can cause discol-
oration or plastics.
Locate your equipment in an area with cool temperatures and low humidity.
Clean with a soft 100% cotton cloth.
Clean with non-ammonia based cleaners.
Wipe foot pads, handles, heart rate grips, and handlebars clean after each use.
Do not pour liquids directly onto your equipment. This can cause damage to the equip-
ment and in the same cases electrocution.
Check pedal motion and stability.
Adjust leveling feet when equipment wobbles or rocks.
Maintain a clean area around equipment free from dust and dirt.
1.0 IMPORTANT SAFETY INSTRUCTIONS
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
1

2.1 USING MANAGER PERFERENCE MODE
Your MATRIX Elliptical total body is designed to allow you to cutomize settings for your pref-
erences and diagnostics. The Manager Pereference Mode can only be accessed while the
Elliptical total body is powered up. Folllow the instructions to adjust the Elliptical total body
computer for your desired setting.
Power up the Elliptical total body and Hold the UP and DOWN arrow keys for 3 sec-
onds. The word Manager will apperar in the alphanumeric window and will enter
into the Manager Preference Setting automatically after 3 seconds. Continue to
pedal until finished.
Select information you would like to view or change from the following list, by using
the UP or DOWN arrows. Press ENTER to select.
Manger preference mode will allow you to view and set the following.
2.2 SELECTING US OR METRIC
Follow the instructions above. Select P4 speed. Select miles or kilometers according to your
location. The distance and weight will automatically be adjusted.
2.3 USING CSAFE
Matrix is the leading in entertainment availability. On the back of the console are three RJ45
receptacles. They are marked CSAFE IN, CSAFE OUT, and ENTERTAINMENT.
Use the csafe in to plug in an csafe device using the RJ45 connector csafe out allows csafe
products to be daisy chained together from one unit to the next. The connection is as fol-
lows;
2.0 USING MANAGER PERFERENCED MODE
STEP 1
2
STEP 2
Use UP or DOWN arrows to increase or decrease values.
Press START to save and enter selected values and exit to STEP 2.
Exit by pressing Start. Screen will reset to Start up.
DISPLAY
Manager
CODE: INFORMATION
P0: Maximum program time
P1: Default time
P2: Default level
P3: Default weight
P4: Speed
P5: Machine
P6: TV IR
P7:Cardio Entertainment
P8: Accumulated Distance
P9: Accumulated Time
P10: Software Version
DEFAULT VALUE
95 min
20 min
L1
150 lbs
Miles
BI
On
On
MIN.
5
5
L1
80 lbs
Miles
BI
On
On
MAX.
95
95
L20
400 lbs
KM
RE,EL
OFF
OFF
USER DEFINABLE
Y
Y
Y
Y
Y
Y
Y
Y
STEP 3
STEP 4
STEP 5
CPU CSAFE IN
CSAFE OUT CSAFE IN
CSAFE OUT CSAFE IN
UNIT 1
UNIT 2
UNIT 3

3.0 USING THE ELLIPTICAL TOTAL BODY
3
The E5x has been designed for users of all fitness levels. The E5x has linked upper and
lower body motion designed to give a complete low impact body workout. The stride length
is 21” long and over 8” of lift to accommodate even the tallest user.
The E5x has wide pedals and sturdy handrails for easy mounting. After stepping on the
Elliptical Total Body, face the console, hold on to the center handrail the left and right
upper body grips. Use pedaling motion similar to a bike to begin exercising. Follow instruc-
tions to program your favorite workout.
3.1 PAUSING THE UNIT
Your console has the ability to have a 30 second pause feature. On the back of the console
is a battery cover. If the pause feature is not working try replacing the 9 volt battery by
removing the screw and remove the battery cover. Replace the battery and cover.
3.2 CONSOLE DESCRIPTION
PROGRAMS Simple program view and selection buttons. MATRIX Elliptical total bodys fea-
ture seven programs.
START/QUICK START One Touch Quick Start and Start any time during preference selec-
tion.UP/DOWN Easy information and level selection.
ENTER/SELECT SCREEN/RESET This multi-function button enters information when set-
ting up programming options, toggles information displayed and if held down for 5 seconds
resets the Elliptical total body to Start-up mode.
DISPLAY VIEW These three buttons allow the user to customize the way the unit’s lights are
displayed.
* ENTERTAINMENT Control the CHANNEL and VOLUME of your attached TV or entertain-
ment system. (Must have Fit Connexion™ or entertainment source connected).
* HEAD PHONE JACK Located at the base of the console, just plug in a headset and use
the ENTERTAINMENT buttons to adjust VOLUME. (Must have Fit Connexion™ or enter-
tainment source connected).
( * )ONLY FOR INTERNATIONAL MARKETS.
U.S Market
International Markets

3.0 USING THE ELLIPTICAL TOTAL BODY
4
3.3 MANUAL OPERATION
MATRIX design makes using tghe programs as easy as one touch of a button.
QUICK START Start pedaling and press QUICK START to begin workout.
MANUAL MODE allows you to enter desired time, level and weight.
Select MANUAL program button on left of panel.
Press Enter or wait 5 seconds.
Selecting START will start program.
Select TIME by using the UP or DOWN arrow keys.
Press ENTER or wait 5 seconds.
Select START will start program.
Select LEVEL by using UP or DOWN arrow keys. You can change the level at any
time during workout.
Press ENTER or Wait 5 seconds.
Select START will start program.
Select Weight by using the UP or DOWN arrow keys.
Press START or ENTER to begin workout.
Display, TIME, Starting 3, Starting 2, Starting 1
STEP 1
STEP 2
STEP 3
STEP 4
3.4 OPERATING LEVEL BASED PROGRAMS
Your MATRIX Elliptical total body offers versatile programs to keep the user motivated. The
following instructions will guide you through simple steps to select INTERVALS, ROLLING,
FAT BURN and RANDOM programs.
Select the PROGRAM button on left of panel.
Press ENTER or wait 5 seconds.
Selecting START will start program.
Select TIME by using the UP or DOWN arrow keys.
Press ENTER or wait 5 seconds.
Select START will start program.
Select LEVEL by using UP or DOWN arrow keys. You can change the level at any
time during workout.
Press ENTER or Wait 5 seconds.
Select START will start program.
Select Weight by using the UP or DOWN arrow keys.
Press START or ENTER to begin workout.
Display, TIME, Starting 3, Starting 2, Starting 1
STEP 1
STEP 2
STEP 3
STEP 4

3.0 USING THE ELLIPTICAL TOTAL BODY
5
3.5 HEAT RATE CONTROL
For your convenience, MATRIX FITNESS Ellipticals come standard with digital contact heat
rate sensors and telemetry compatible.
Locate the metal sensors on the handrail of the Ellipticals. Notice there are two separate
pieces of metal on each grip. You must be making contact on both pieces of each grip to
get an accurate heart rate reading. You can grab these sensors in any program to view your
current heart rate located in the lower left hand window marked HEART RATE.
Heart Rate Program
Follow these easy Steps to enter into the Heart Rate Program.
Select the PROGRAM button on left of panel.
Press ENTER or wait 5 seconds.
Selecting START will start program.
Select AGE by using the UP or DOWN arrow keys.
Press ENTER or wait 5 seconds.
Select START will start program.
Select PRECENT by using UP or DOWN arrow keys.
Press ENTER or Wait 5 seconds.
Select START will start program.
Select TIME by using UP or DOWN arrow keys.
Press ENTER or Wait 5 seconds.
Select START will start program.
Select Weight by using the UP or DOWN arrow keys.
Press START or ENTER to begin workout.
Display, TIME, Starting 3, Starting 2,
Starting 1
STEP 2
STEP 3
STEP 4
3.6 CONSTANT WATTS
CONSTANT WATTS program is a unique program that allows you to vary your cadence or
RPM and the Ellipticals resistance will adjust accordingly to your selected goal. The quick-
er you pedal the less resistance for the goal selected.
Follow these easy Steps to enter into the Heart Rate Program.
Select the PROGRAM button on left of panel.
Press ENTER or wait 5 seconds.
Selecting START will start program.
Select WATTS by using the UP or DOWN arrow keys.
Press ENTER or wait 5 seconds.
Select START will start program.
Select TIME by using UP or DOWN arrow keys.
Press ENTER or Wait 5 seconds.
Select START will start program.
Select Weight by using the UP or DOWN arrow keys.
Press START or ENTER to begin workout.
Display, TIME, Starting 3, Starting 2, Starting 1
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 5

4.0 ELLIPTICAL TOTAL BODY SPECIFICATIONS
6
> ELLIPTICAL TRAINER
MX-E5x
SPECIFICATIONS
Product Name E5x
Foot Print inches = 72” x 85” x 29”
cm = 182.9 x 215.9 x 73.6
Weight 350 lbs
158.8 kg
Max User Weight 400 lbs = 181 kgs
Stride Length 21”= 53.3 cm
Frame Construction Aluminum/Steel
Self Contained Yes
Resistance Type Generator
Resistance Level 20
Dual Action Yes
PROGRAMS
One Button Quick Start Yes
Random (20 profiles) Yes
Target Heart Rate Yes
Interval Yes
Constant Watts Yes
Rolling Yes
Fat Burn Yes
CLEANING BRUSH
Track Cleaning Yes
PEDAL
Self Leveling Yes
Pedal Size 16” x 7”= 40.6 x 17.8 cm
Distance Between Pedals 3.5” = 8.9 cm
HEART RATE
Wireless Heart Rate Yes
Contact Heat Rate Yes
ENTERTAINMENT READY
Coaxial Cable Connection Yes
AC TV Power Connection Yes
Monitor Mount Yes

5.0 ASSEMBLY
7
5.1) ELLIPTICAL TRAINER FASTENERS & ASSEMBLY TOOLS
MX-E5x
STEP 1
STEP 2

5.0 ASSEMBLY
8
STEP 3 STEP 4

5.0 ASSEMBLY
9
STEP 5 STEP 6