MedaCure AirStream AS36 User manual

User Manual
FOR MODEL #
© 2018
MADE IN CHINA

1
INDEX
MODEL ................................................................................................................................................................................2
INTRODUCTION .................................................................................................................................................................2
INTENDED USE ..................................................................................................................................................................2
STANDARDS .....................................................................................................................................................................3
GENERAL WARNING..........................................................................................................................................................3
SYMBOLS ...........................................................................................................................................................................3
GENERAL DESCRIPTION / OVERVIEW.........................................................................................................................4-5
TTINGS........................................................................................................................................6-9
INSTALLATION...................................................................................................................................................................10
USER WARNINGS........................................................................................................................................................10-11
STORAGE..........................................................................................................................................................................11
MAINTENANCE ................................................................................................................................................................11
CLEANING AND DISINFECTION......................................................................................................................................12
CONDITIONS OF DISPOSAL............................................................................................................................................12
General conditions of disposal...........................................................................................................................................12
SPARE PARTS/ ACCESSORIES TROUBLESHOOTING ..............................................................................................12
TECHNICAL FEATURES...................................................................................................................................................13
WARRANTY.......................................................................................................................................................................14

2
Class I Medical Device
according to Directive 93/42/EEC
M
AS36 (36” WIDE), AS42 (42” WIDE), AS48 (48” WIDE)
AIR STREAM – ALTERNATING PRESSURE WITH LOW AIR LOSS MATTRESS AND PUMP
INTRODUCTION
Thank you for purchasing the MedaCure .
This user’s manual provides suggestions on how to correctly use the product and gives valuable advice regarding your
safety. Please read through the manual carefully before using the product.
Should you have any questions, please contact your dealer for advice and assistance.
INTENDED USE
The Air Stream is designed for bed sore and wound care therapy treatment and prevention, which may occur during an
extended hospital stay and nursing home /long term care environment.
· CAUTION!
· • Do not use the product for any purpose not indicated in this manual.
· •d
operate this device.
· • MedaCure Inc. declines all liability for any consequences resulting from incorrect use of
this product and from unauthorized alteration to the frame of the product.
· • The manufacturer reserves the right to change the information contained in this
document without prior notice

3
STANDARDS
The system has been tested and successfully approved to the following
standards: EN 60601-1
EN 60601-1-2
Keep this manual in a safe place and refer to the manual before use and under proper medical
supervision. Improper operation of this system may cause damage to the product and possible
injury to the
1. Do not us
understanding this instruction manual. If you are unable to understand the warnings, cautions or
instructions, please contact a healthcare professional, dealer or authorized technician before attempting
to use
2.Consult with physician or therapist to determine the correct adjustment and the correct use of this device.
3. Keep the packed kit away from heat sources.
4. -
5. Do not allow children to play with or operate the pump or mattress.
SYMBOLOGY

4
GENERAL DESCRIPTION
ILATION MATTRESS SYSTEM
S
MAIN CONTROL PANEL
POWER SWITCH

UP/DOWN ARROW KEYS
MENU
MUTE
POWER SWITCH
socket the unit goes into Standby Mode and a green
LED will blink every 3 seconds until the POWER
ON/OFF button is pressed.
Press the POWER ON/OFF button to start system
operation. The Main Screen shown below in Figure
1
vary from the image in Figure 1 below.
Figure 1: Main Screen
P
Locks all functions* automatically after 5 mins.
disable, press and hold the button for 3 sec.
*Except “ Power”, “Low Pressure” and “Alarm Off”
function.
MUTE
Mutes the AUDIBLE ALARM. When the ALARM MUTE
key is pressed, the AUDIBLE ALARM cannot be heard,
e display
and a solid blue LED activates.
MENU
Press this key to enter the MAIN MENU options
screen. Once in the Main Menu, use the
ARROW keys to select the desired option an d
then press the MENU key a second time t o
save the selected option.
UP/DOWN ARROW KEYS
ARROW keys moves the selection arrow up or
down one row at a time and are also used to
increase/decrease numerical values.

5
This key selects the ALTERNATING PRESSURE (AP) or STATIC (Flt) mode. The screen display
toggles between Flt and AP.
This key activates or deactivates the MAXIMUM INFLATE mode. When activated, the screen displays
for approximately 20 minutes, unless turned off by pressing the MAX key again. The system will then
revert back to the previously set operating mode. The mattress MAX pressure value is not adjustable.
FB is shown on
the display and the set pressure in the mattress is automatically increased by a set percentage. It is
This fe ature helps prevent a patient from “bottoming out” when he or she is put into an inclined or
“Fowler” position.
This key activates or deactivates the LAL feature. When activated, LAL is shown on the display and a
red through the LAL coverlet.
TInf is shown on the display
option. See INFLATE BOLSTER SE CTION in this manual.
PUMP – HOSE CONNECTOR
All hoses are sealed & connected through 1 Single
Connector. Connect the hose connector to the pump as shown in Figure 1a
Figure 1a: Hose connector

lbs
6
MAP
Figure 1b:
MAIN MENU
While the unit is showing the Main Screen (Figure 1) pressing the Enter/Menu key shows the Main Menu screen
(See Figure 2).
Figure 2: Main Menu Screen
P
This option is used to set the patient’s weight. The Controller automatically adjusts the pressure values for Float and
Alternating Pressure modes based on the patient’s weight. Resetting the patient’s weight at any time will override any
user changes to AP and/or Float Pressures entered directly on the main screen or through the Advanced Settings.
and Cycle time is 6 minutes.
Figure 3: Patient's Weight
Use the Up and Down arrows to set the patient’s weight. When done, press the Enter/Menu key to save and return to
the main screen.
MAIN MENU
Set Pressure
Set Fowler
Set Cycle
Exit
Float
AP
Kg
UNITS
EXIT
Exit
LEVEL 2
LEVEL 1

7
ADVANCED SETTINGS
This option is used to customize settings such as Mattress Pressures, percentage of Fowler Boost increase and AP
Cycle time. From the Main Menu screen (Figure 2 Figure 3)
SET PRESSURE
Figure 3: Advance Settings Menu
Use the Up and Down arrow keys to select the desired feature. Press the Enter/Menu key to select “Set Pressure” in
order to adjust Float and AP pressures.
Figure 4: Set Pressure Menu Figure 5: Float Pressure Adjustment
Figure 5), use
return to the Main Screen.
Figure 6: Set Pressure Menu Figure 7: AP Pressure Adjustment
Figure 7), use the
Up and Down arrow keys to set the desired AP pressure. When done, press the Enter/Menu key to save and return to
the Main Screen.
SET FOWLER
Figure 8: Fowler Boost Adjustment
Use the Up and Down Arrow keys to set the desired Fowler Boost pe rcentage increase. When done, press the
Enter/Menu key to save and return to the Main Screen.

8
SET CYCLE
The default cycle time is 6 minutes.
Figure 9: AP Cycle Time Adjustment
Use the Up and Down arrow keys to set the desired Cycle time. When done, press the Enter/Menu key to save and
return to the Main Screen.
SET WEIGHT UNITS (Pounds/Kilograms)
From the main menu screen use the Up and Down arrow keys to select Lbs/Kg
either English units (Lbs = Pounds), or SI units (Kg = Kilograms) by using the up and down arrow keys.
Figure 10: Selection of Weight Units
Press the Enter/Menu key to save and return to the Main Screen.
EXIT
Select this option to make no changes and return to the Main Screen.
I
Bolsters – is integrated in the cover with side egress point for easy patient
transfer Quick manual transfer.
Press the I Bolster key (Figure 11)
Inf
transfer option.
Figure 11
Quic
The quick manual connector tubes are located at the foot end of the mattress.
See Figure 12
side bolsters. See Figure 13

9
Q
Press on the blue tab
to disconnect the tubes
Figure 12 Figure 13
C
situations. The location of the CPR is on the middle of the hose which connects to the pump. See Figure 1 4.
leaking from the mattress.
Figure 14: CPR PULL STRAP

10
1. Air Stream is a replacement mattress. Place the mattress directly on the bed frame, with the air hose connectors
positioned at the footboard.
2. Hang the pump over the foot board using the
BEFORE USE
USER WARNINGS
1. Electric shock - Avoid electric shock
It is very dangerous to use electric products improperly or damaged ones.
1) Unplug the pump control unit if you will not use it for a long time.
2) D
3) A
4) U
Do not open the control unit by yourself. This should only be done by an authorized technician.

11
2.Safe Place
3) Keep sharp objects or strong acid and alkali chemical agents away from the mattress.
4) Fuse will blow to protect the device when electric short circuit is caused by the current loading.
3. Cautions -
1) Only use the system under the supervision of a nurse or caregiver that understands how to operate this device.
2) Do not use any parts that did not come with this unit or supplied by MedaCure or authorized dealer.
agents.
4) Do not modify the pump and mattress without authorization from the manufacturer and do not insert objects
into the control unit or mattress.
6) Plug the control unit into the ground power supply.
7) Do not use the product in case of the following:
1. The plug or the cable is damaged.
2. The system sounds abnormal or vibrates intensely.
4.Th
NOTE
1) S
2) Fold the mattress in two from mattress foot to head.
3) Allow time for air to escape from mattress to reduce storage space.
4) C

12
CLEANING AND DISINFECTION
1. Clean the mattress with mild soap.
2. Do not immerse or soak pump unit.
3. After cleaning, dry the mattress without direct sunlight exposure.
4. Check that the connection tubes are not obstructed by dust or other object. Use a soft swab to clean the tubes if necessary.
NOTE Never use acids, alkalis or solvents such as acetone to clean the mattress
CONDITIONS OF DISPOSAL
General conditions of disposal
Dispose the device in the appropriate disposal areas for recycling.
At the end of its life, the products must not be disposed of along with other domestic waste.
others that provide this service.
SPARE PARTS/ACCESSORIES
For spare parts and accessories please contact MedaCure or authorized
TROUBLESHOOTING
might require a technician to take care of the problem.
WARNING!
Unplug the pump before starting the cleaning procedure.

FEATURE PUMP
Power supply
Power
Fuse rating
Pressure
Dimensions
Weight
Environment
temperature
Environment
humidity
Atmospheric Pressure
FEATURE MATTRESS
Dimensions
Air cell material
Cover material
Elements number
Max weight
Weight
13
Pump Control Unit
Mattress
120V/60Hz
18.5W
1A/250V
5mmhg~50mmhg
12.6" (W) x6.8" (L) x12" (H)
11 lbs.
80" (L) x 36" (W) x 12" (H)
including 4" Perimeter & 1.5" foam base
6.5"
21lbs
80" (L) x 42" (W) x 12" (H)
including 4" Perimeter & 1.5" foam base
80" (L) x 48" (W) x 12" (H)
including 4" Perimeter & 1.5" foam base
AS36
AS42
AS48
500

MEDACURE LIMITED WARRANTY
MEDACURE LIMITED WARRANTY
This warranty is extended only to the original purchaser who purchases this product when new and unused from MedaCure or a
urchaser or owner.
Coverage under this warranty will end upon any such subsequent sale or other transfer of title to any other person.
T
MedaCure warrants the mattress and cover when purchased new and unused to be free from defects in materials and workmanship for a
coverage under
this warranty. MedaCure warrants the control unit when purchased new and unused to be free from defects in materials and workmanship for
a period of one (1) year from the date of purchase from MedaCure or a dealer, with a copy of the required for coverage under
this warranty. If within such warranty period any such product shall be proven to be defective, such product shall be repaired or replaced, at
charges incurred in replacement part installation or repair of any
replacement.
For warranty service, please contact the dealer from whom you purchased your MedaCure product or MedaCure customer service only if
purchased from MedaCure direct. Provide model number, and the date of purchase, indicate nature of the defect and, if the product is
serialized, indicate the serial number.
DO return products to MedaCure without prior consent. Please obtain a return authorization number from MedaCure. C.O.D. shipments
inspection using the serial
L
FIED
T
FITNESS FOR A
.
T